Jun 17, 2024 |
May 3, 2024 Informational Update- JUEX-RT-000030 - The Juniper BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).
- JUEX-RT-000040 - The Juniper BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer.
- JUEX-RT-000050 - The Juniper BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).
- JUEX-RT-000070 - The Juniper router configured for Multicast Source Discovery Protocol (MSDP) must filter received source-active multicast advertisements for any undesirable multicast groups and sources.
- JUEX-RT-000100 - The Juniper router configured for BGP must reject route advertisements from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.
- JUEX-RT-000120 - The Juniper router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy.
- JUEX-RT-000140 - The Juniper router must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled.
- JUEX-RT-000170 - The Juniper perimeter router must be configured to protect an enclave connected to an alternate gateway by using an inbound filter that only permits packets with destination addresses within the site's address space.
- JUEX-RT-000180 - The Juniper perimeter router must not be configured to be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider.
- JUEX-RT-000190 - The Juniper perimeter router must not be configured to redistribute static routes to an alternate gateway service provider into BGP or an IGP peering with the NIPRNet or to other autonomous systems.
- JUEX-RT-000200 - The Juniper out-of-band management (OOBM) gateway router must be configured to have separate IGP instances for the managed network and management network.
- JUEX-RT-000220 - The Juniper multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated Router (DR) for any undesirable multicast groups and sources.
- JUEX-RT-000230 - The Juniper multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups.
- JUEX-RT-000260 - The Juniper router must be configured to log all packets that have been dropped.
- JUEX-RT-000300 - The Juniper router must be configured to authenticate all routing protocol messages using NIST-validated FIPS 198-1 message authentication code algorithm.
- JUEX-RT-000310 - The Juniper PE router must be configured to limit the number of MAC addresses it can learn for each Virtual Private LAN Services (VPLS) bridge domain.
- JUEX-RT-000380 - The Juniper router must be configured to restrict traffic destined to itself.
- JUEX-RT-000390 - The Juniper router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself.
- JUEX-RT-000430 - The Juniper BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core.
- JUEX-RT-000450 - The Juniper PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode, or a firewall filter, enabled on all CE-facing interfaces.
- JUEX-RT-000460 - The Juniper out-of-band management (OOBM) gateway must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel.
- JUEX-RT-000470 - The Juniper out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC).
- JUEX-RT-000480 - The Juniper out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the NOC.
- JUEX-RT-000500 - The Juniper perimeter router must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding (uRPF).
- JUEX-RT-000510 - The Juniper perimeter router must be configured to block all packets with any IP options.
- JUEX-RT-000520 - The Juniper PE router must be configured to ignore or block all packets with any IP options.
- JUEX-RT-000540 - The Juniper BGP router must be configured to use a unique key for each autonomous system (AS) that it peers with.
- JUEX-RT-000600 - The Juniper router must be configured to have Gratuitous ARP disabled on all external interfaces.
- JUEX-RT-000620 - The Juniper router must be configured to have Internet Control Message Protocol (ICMP) unreachable notifications disabled on all external interfaces.
- JUEX-RT-000630 - The Juniper router must be configured to have Internet Control Message Protocol (ICMP) mask replies disabled on all external interfaces.
- JUEX-RT-000660 - The Juniper BGP router must be configured to limit the prefix size on any inbound route advertisement to /24 or the least significant prefixes issued to the customer.
- JUEX-RT-000670 - The Juniper PE router must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain.
- JUEX-RT-000750 - The Juniper perimeter router must be configured to have Link Layer Discovery Protocols (LLDPs) disabled on all external interfaces.
- JUEX-RT-000760 - The Juniper perimeter router must be configured to have Proxy ARP disabled on all external interfaces.
- JUEX-RT-000770 - The Juniper perimeter router must be configured to block all outbound management traffic.
- JUEX-RT-000780 - The Juniper multicast Designated Router (DR) must be configured to filter the IGMP and MLD Report messages to allow hosts to join only multicast groups that have been approved by the organization.
- JUEX-RT-000790 - The Juniper multicast Designated Router (DR) must be configured to filter the IGMP and MLD Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization.
- JUEX-RT-000800 - The Juniper Multicast Source Discovery Protocol (MSDP) router must be configured to only accept MSDP packets from known MSDP peers.
- JUEX-RT-000830 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values.
- JUEX-RT-000840 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values.
- JUEX-RT-000850 - The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option.
- JUEX-RT-000860 - The Juniper perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header.
- JUEX-RT-000870 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type.
- JUEX-RT-000920 - The Juniper PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs.
- JUEX-RT-000930 - The Juniper PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT).
- JUEX-RT-000990 - The Juniper router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments.
Miscellaneous- Metadata updated.
- See also link updated.
|
