| CISC-RT-000010 - The Cisco router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies. | ACCESS CONTROL |
| CISC-RT-000050 - The Cisco router must be configured to enable routing protocol authentication using FIPS 198-1 algorithms with keys not exceeding 180 days of lifetime. | ACCESS CONTROL, IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled. | ACCESS CONTROL |
| CISC-RT-000070 - The Cisco router must be configured to have all non-essential capabilities disabled. | CONFIGURATION MANAGEMENT |
| CISC-RT-000130 - The Cisco router must be configured to restrict traffic destined to itself. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000140 - The Cisco router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself - ICMP packets destined to itself | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000160 - The Cisco router must be configured to have IP directed broadcast disabled on all interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000170 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000180 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000190 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) redirect messages disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000200 - The Cisco router must be configured to log all packets that have been dropped at interfaces via ACL. | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000210 - The Cisco router must be configured to produce audit records containing information to establish where the events occurred. | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000220 - The Cisco router must be configured to produce audit records containing information to establish the source of the events. | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000235 - The Cisco router must be configured to have Cisco Express Forwarding enabled. | CONFIGURATION MANAGEMENT |
| CISC-RT-000236 - The Cisco router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments. | CONFIGURATION MANAGEMENT |
| CISC-RT-000237 - The Cisco router must not be configured to use IPv6 Site Local Unicast addresses. | CONFIGURATION MANAGEMENT |
| CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000250 - The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy. | ACCESS CONTROL |
| CISC-RT-000260 - The Cisco perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000270 - The Cisco perimeter router must be configured to block inbound packets with source Bogon IP address prefixes. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000280 - The Cisco perimeter router must be configured to protect an enclave connected to an alternate gateway by using an inbound filter that only permits packets with destination addresses within the sites address space. | ACCESS CONTROL |
| CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider. | ACCESS CONTROL |
| CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an alternate gateway service provider into BGP or an IGP peering with the NIPRNet or to other autonomous systems. | ACCESS CONTROL |
| CISC-RT-000310 - The Cisco perimeter router must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding (uRPF). | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000320 - The Cisco perimeter router must be configured to filter traffic destined to the enclave in accordance with the guidelines contained in DoD Instruction 8551.1. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000330 - The Cisco perimeter router must be configured to filter ingress traffic at the external interface on an inbound direction. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000340 - The Cisco perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000350 - The Cisco perimeter router must be configured to block all packets with any IP options. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000360 - The Cisco perimeter router must be configured to have Link Layer Discovery Protocol (LLDP) disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000370 - The Cisco perimeter router must be configured to have Cisco Discovery Protocol (CDP) disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000380 - The Cisco perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000391 - The Cisco perimeter router must be configured to suppress Router Advertisements on all external IPv6-enabled interfaces. | CONFIGURATION MANAGEMENT |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000393 - The Cisco perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000394 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000396 - The Cisco perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000400 - The Cisco out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000410 - The Cisco out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000420 - The Cisco out-of-band management (OOBM) gateway router must be configured to have separate IGP instances for the managed network and management network. | ACCESS CONTROL |
| CISC-RT-000430 - The Cisco out-of-band management (OOBM) gateway router must be configured to not redistribute routes between the management network routing domain and the managed network routing domain. | ACCESS CONTROL |
| CISC-RT-000440 - The Cisco out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the Network Operations Center (NOC). | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000450 - The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface - OOBM interface | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel. | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000470 - The Cisco BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM). | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000480 - The Cisco BGP router must be configured to use a unique key for each autonomous system (AS) that it peers with. | ACCESS CONTROL, CONFIGURATION MANAGEMENT |
| CISC-RT-000490 - The Cisco BGP router must be configured to reject inbound route advertisements for any Bogon prefixes. | ACCESS CONTROL |
