Detections
Analytics

JUSX-DM-000020 - The Juniper SRX Services Gateway must generate an alert message to the management console and generate a log event record that can be forwarded to the ISSO and designated system administrators when the local accounts (i.e., the account of last resort or root account) are modified.

Warning! Audit Deprecated

This audit has been deprecated and will be removed in a future update.

View Next Audit Version

Information

An authorized insider or individual who maliciously modifies a local account could gain immediate access from a remote location to privileged information on a critical security device. Sending an alert to the administrators and ISSO when this action occurs greatly reduces the risk that accounts will be surreptitiously modified.

Automated mechanisms can be used to send automatic alerts or notifications. Such automatic alerts or notifications can be conveyed in a variety of ways (e.g., telephonically, via electronic mail, via text message, or via websites). The ALG must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. Alerts must be sent immediately to designated individuals. Alerts may be sent via NMS, SIEM, Syslog configuration, SNMP trap or notice, or manned console message.

Although, based on policy, administrator accounts must be modified on the AAA server, thus this requirement addresses the modification of unauthorized accounts on the Juniper SRX itself. This does not negate the need to address this requirement on the AAA server and the event monitoring server (e.g., Syslog, Security Information and Event Management [SIEM], or SNMP servers).

Solution

Configure the Juniper SRX to generate and send a notification or log message immediately that can be forwarded via an event monitoring system (e.g., via Syslog configuration, SNMP trap, manned console message, or other events monitoring system). The NSM, Syslog, or SNMP server must then be configured to send the message.

The following commands configure the device to immediately display a message to any currently logged on administrator's console when changes are made to the configuration. This is an example method. Alerts must be sent immediately to the designated individuals (e.g., via Syslog configuration, SNMP trap, manned console message, or other events monitoring system).

[edit]
set system syslog users * change-log <info | any>
set system syslog host <IP-syslog-server> any any
set system syslog file account-actions change-log any any

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Juniper_SRX_SG_Y22M10_STIG.zip

Item Details

References: CAT|II, CCI|CCI-000139, CCI|CCI-000366, Rule-ID|SV-229016r518226_rule, STIG-ID|JUSX-DM-000020, STIG-Legacy|SV-80935, STIG-Legacy|V-66445, Vuln-ID|V-229016

Plugin: Juniper

Control ID: 516ba201421272c1957e7bba86cd6a25d22959104d6a143683137b3f0448589c