Detections
Analytics

ARST-RT-000760 - The PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit.

Information

VPWS is an L2VPN technology that provides a virtual circuit between two PE routers to forward Layer 2 frames between two customer-edge routers or routers through an MPLS-enabled IP core. The ingress PE router (virtual circuit head-end) encapsulates Ethernet frames inside MPLS packets using label stacking and forwards them across the MPLS network to the egress PE router (virtual circuit tail-end). During a virtual circuit setup, the PE routers exchange VC label bindings for the specified VC ID. The VC ID specifies a pseudowire associated with an ingress and egress PE router and the customer-facing attachment circuits.

To guarantee that all frames are forwarded onto the correct pseudowire and to the correct customer and attachment circuits, it is imperative that the correct VC ID is configured for each attachment circuit.

NOTE: Nessus has provided the target output to assist in reviewing the benchmark to ensure target compliance.

Solution

Assign globally unique VC IDs for each virtual circuit and configure the attachment circuits with the appropriate VC ID.

Configure the same VC ID on both ends of the VC.

patch panel
 patch port
 connector 1 interface Ethernet2
 connector 2 pseudowire bgp vpws evi-1 pseudowire pw1
 patch subintf
 connector 1 interface Ethernet3.1
 connector 2 pseudowire bgp vpws evi-1 pseudowire pw2

router bgp 65000
 neighbor 10.0.0.1 remote-as 1
 neighbor 10.0.0.1 send-community extended
 neighbor 10.0.0.1 maximum-routes 12000
 !
 vpws evi-1
 rd 10.2.2.2:2
 route-target import export evpn 0.0.0.0:1
 mpls control-word
 !
 pseudowire pw1
 evpn vpws id local 2001 remote 1001
 !
 pseudowire pw2
 evpn vpws id local 2002 remote 1002
 !
 address-family evpn
 neighbor default encapsulation mpls next-hop-self source-interface Loopback0
 neighbor 10.0.0.1 activate

VLAN mode example:

interface Ethernet3
 no routerport
!
interface Ethernet3.1
 encapsulation dot1q vlan 1

Flexible Encapsulation example:

interface Ethernet3
 no routerport
!
interface Ethernet3.1
 encapsulation vlan
 client dot1q 11 network client

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Arista_MLS_EOS_4-2x_Y24M07_STIG.zip

Item Details

Category: CONTINGENCY PLANNING

References: 800-53|CP-8, CAT|I, CCI|CCI-004931, Rule-ID|SV-256055r991794_rule, STIG-ID|ARST-RT-000760, Vuln-ID|V-256055

Plugin: Arista

Control ID: 80f5a5425bd23713c358cfa8709be746334c2cd080ee7c9f6cf56ec5fd5b00c9