ARST-RT-000530 - The Arista router must be configured to have Internet Control Message Protocol (ICMP) unreachable notifications disabled on all external interfaces.

Information

The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ICMP messages under a wide variety of conditions. Host unreachable ICMP messages are commonly used by attackers for network mapping and diagnosis.

Solution

Disable ICMP unreachable notifications on all external interfaces.

Step 1: The Arista router can be configured to filter out the ICMP Unreachable for (Type 3) code 0 (Network unreachable) IPv4 and IPv6 packets with the following command:

router(config)#ip icmp rate-limit-unreachable 0
router(config)#ipv6 icmp rate-limit-unreachable 0

Step 2: The Arista router can be configured to filter out the ICMP Unreachable for (Type 3) code 1 (Network unreachable) IPv4 and IPv6 packets with the following command:

router(config)#ip access-list BLK-ICMP-Unreachables
10 deny icmp any any host-unreachable
20 permit ip any any
!

Step 3: This would need to be applied on the egress interface (for example as in et1 below):

router(config)#interface ethernet1
no routerport
ip address 32.1.1.12/24
ip access-group BLK-ICMP-Unreachables out
!

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Arista_MLS_EOS_4-2x_Y24M07_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-5, CAT|II, CCI|CCI-002385, Rule-ID|SV-256032r882438_rule, STIG-ID|ARST-RT-000530, Vuln-ID|V-256032

Plugin: Arista

Control ID: 53afbc57c1581be9dd5717f382b59a911e75574842f1321bddb4327476184d67