CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets.

Information

One of the fragmentation weaknesses known in IPv6 is the undetermined transport packet. This packet contains an undetermined protocol due to fragmentation. Depending on the length of the IPv6 extension header chain, the initial fragment may not contain the layer four port information of the packet.

Solution

Configure the router to drop IPv6 undetermined transport packets as shown in the example below.
R1(config)#ipv6 access-list FILTER_IPV6
R1(config-ipv6-acl)#deny ipv6 any any undetermined-transport log
R1(config-ipv6-acl)#permit ipv6 ...
...
...
...
R1(config-ipv6-acl)#deny ipv6 any any log
R1(config-ipv6-acl)#exit
R1(config)#int g1/0
R1(config-if)#ipv6 traffic-filter FILTER_IPV6 in

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_IOS-XE_Router_Y24M07_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-7(11), CAT|II, CCI|CCI-002403, Rule-ID|SV-230048r950991_rule, STIG-ID|CISC-RT-000392, Vuln-ID|V-230048

Plugin: Cisco

Control ID: c149b4173256913a0d3c7c4a5cff563f213077a26b5c7a96436287256482177e