NET-IPV6-061 - Packet with invalid Destination Option header - Outbound ACL

Information

The administrator must ensure the perimeter router is configured to drop all inbound and outbound IPv6 packets containing a Destination Option header with invalid option type values.

These options are intended to be for the Hop-by-Hop header only. The optional and extensible natures of the IPv6 extension headers require higher scrutiny since many imiplementtions do not always drop packets with headers that it can't recognize and hence could cause a DoS on the target device. In addition, the type, lengthe, value (TLV) formatting provides the ability for headers to be very large. According to the DoD IPv6 IA Guidance for MO3, headers which may be valid but serve no intended use should not be allowed into or out of any network (S0-C2-opt-3). Review the perimeter router or multi-layer switch configuration and determine if filters are bound to the applicable interfaces to drop all inbound and outbound IPv6 packets containing a Destination Option header with option type values of 0x05 (Router Alert) or 0xC2 (Jumbo Payload).

NOTE: Change 'IPV6_EGRESS_ACL' to the access control list for IPv6 inbound connection filtering and verify the ACL is applied to the proper interface.

Solution

Configure the perimeter router or multi-layer switch to drop all inbound and outbound IPv6 packets containing a Destination Option header with option type values of 0x05 (Router Alert) or 0xC2 (Jumbo Payload).

See Also

https://iasecontent.disa.mil/stigs/zip/U_Network_Perimeter_Router_L3_Switch_V8R32_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-7, CAT|II, Rule-ID|SV-40397r1_rule, STIG-ID|NET-IPV6-061, Vuln-ID|V-30618

Plugin: Cisco

Control ID: 35c79940309e59db6a93c83104f15427b2762579afa251c9ec9b8e6622bc83f5