JUEX-L2-000140 - The Juniper EX switch must be configured to enable Dynamic Address Resolution Protocol (ARP) Inspection (DAI) on all user VLANs.

Information

DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the DHCP snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.

NOTE: Nessus has provided the target output to assist in reviewing the benchmark to ensure target compliance.

Solution

Configure the switch to have Dynamic Address Resolution Protocol (ARP) Inspection (DAI) enabled on all user VLANs.

set vlans <untrusted VLAN name> vlan-id <VLAN ID>
set vlans <untrusted VLAN name> forwarding-options dhcp-security arp-inspection

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Juniper_EX_Switches_Y24M07_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-5, CAT|II, CCI|CCI-002385, Rule-ID|SV-253961r843916_rule, STIG-ID|JUEX-L2-000140, Vuln-ID|V-253961

Plugin: Juniper

Control ID: eb8b6856fb2c15c72bb9be915116b7e90c03a12b34f785bf6ce15e1483a9082b