JUNI-RT-000030 - The Juniper router must be configured to use keys with a duration not exceeding 180 days for authenticating routing protocol messages.

Information

If the keys used for routing protocol authentication are guessed, the malicious user could create havoc within the network by advertising incorrect routes and redirecting traffic. Some routing protocols allow the use of key chains for authentication. A key chain is a set of keys that is used in succession, with each having a lifetime of no more than 180 days. Changing the keys frequently reduces the risk of them eventually being guessed.

Keys cannot be used during time periods for which they are not activated. If a time period occurs during which no key is activated, neighbor authentication cannot occur, and therefore routing updates will fail. Therefore, ensure that for a given key chain, key activation times overlap to avoid any period of time during which no key is activated.

NOTE: Nessus has provided the target output to assist in reviewing the benchmark to ensure target compliance.

Solution

This requirement is not applicable for the DoDIN Backbone.

Configure each key used for routing protocol authentication to have a lifetime of no more than 180 days as shown in the example below.

[edit security authentication-key-chains]
set key-chain BGP_KEY key 1 start-time 2018-05-01.12:00 secret xxxxxxxxxxxxx
set key-chain BGP_KEY key 2 start-time 2018-09-01.12:00 secret xxxxxxxxxxxxx
set key-chain BGP_KEY key 3 start-time 2019-01-01.12:00 secret xxxxxxxxxxxxx
}

[edit protocols ospf area 0.0.0.0 interface ge-0/0/0.0]
set authentication md5 1 key xxxxxxxx start-time 2018-01-01.01:01
set authentication md5 2 key xxxxxxxx start-time 2018-04-01.01:01
set authentication md5 3 key xxxxxxxx start-time 2018-08-01.01:01

Note: Currently Junos does not support key chains for RIP.

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Juniper_Router_Y24M07_STIG.zip

Item Details

Category: ACCESS CONTROL, CONFIGURATION MANAGEMENT

References: 800-53|AC-4(17), 800-53|CM-6b., CAT|II, CCI|CCI-000366, CCI|CCI-002205, Rule-ID|SV-217013r945863_rule, STIG-ID|JUNI-RT-000030, STIG-Legacy|SV-101021, STIG-Legacy|V-90811, Vuln-ID|V-217013

Plugin: Juniper

Control ID: e75117448c979f713b965ef8f1976d26a49758dc7bf5011cc102c7423c77bf7e