JUSX-AG-000127 - The Juniper SRX Services Gateway Firewall must be configured to fail securely in the event of an operational failure of the firewall filtering or boundary protection function.

Information

If a boundary protection device fails in an unsecure manner (open), information external to the boundary protection device may enter, or the device may permit unauthorized information release.

Secure failure ensures when a boundary control device fails, all traffic will be subsequently denied.

Fail secure is a condition achieved by employing information system mechanisms to ensure in the event of operational failures of boundary protection devices at managed interfaces (e.g., routers, firewalls, guards, and application gateways residing on protected subnetworks commonly referred to as demilitarized zones), information systems do not enter into unsecure states where intended security properties no longer hold.

NOTE: Nessus has not performed this check. Please review the benchmark to ensure target compliance.

Solution

Implement and configure the Juniper SRX to fail closed, thus preventing traffic from flowing through without filtering and inspection. In case of failure, document a process for the Juniper SRX to be configured to fail closed. Redundancy should be implemented if failing closed has a mission impact.

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Juniper_SRX_SG_Y24M07_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-7(18), CAT|II, CCI|CCI-001126, Rule-ID|SV-214534r557389_rule, STIG-ID|JUSX-AG-000127, STIG-Legacy|SV-80823, STIG-Legacy|V-66333, Vuln-ID|V-214534

Plugin: Juniper

Control ID: 987856d191ccd94ee5fcd32da405b17d04a3f00dbb390abe05d0112a9ba4373b