JUSX-AG-000146 - The Juniper SRX Services Gateway Firewall must generate an alert to, at a minimum, the ISSO and ISSM when unusual/unauthorized activities or conditions are detected during continuous monitoring of communications traffic as it traverses inbound or outbound across internal security boundaries.

Information

Without an alert, security personnel may be unaware of major detection incidents that require immediate action and this delay may result in the loss or compromise of information.

Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema.

In accordance with CCI-001242, the ALG which provides content inspection services is a real-time intrusion detection system. These systems must generate an alert when detection events from real-time monitoring occur as required by CCI-2262 and CCI-2261. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The ALG must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. Alerts must be sent immediately to designated individuals. Alerts may be sent via NMS, SIEM, Syslog configuration, SNMP trap or notice, or manned console message.

Unusual/unauthorized activities or conditions may include large file transfers, long-time persistent connections, unusual protocols and ports in use, and attempted communications with suspected malicious external addresses.

NOTE: Nessus has provided the target output to assist in reviewing the benchmark to ensure target compliance.

Solution

Configure the Juniper SRX to generate and send a notification or log message immediately that can be forwarded via an event monitoring system (e.g., via Syslog configuration, SNMP trap, manned console message, or other events monitoring system). The NSM, Syslog, or SNMP server must then be configured to send the message.

The following example configures the zone security policy to include the log and/or syslog action in all terms to log packets matching each firewall term to ensure the term results are recorded in the firewall log and Syslog. To get traffic logs from permitted sessions, add 'then log session-close' to each policy. To get traffic logs from denied sessions, add 'then log session-init' to the policy.

Security policy and security screens:
set security policies from-zone <zone_name> to-zone <zone_name> policy <policy_name> then log

Example:
set security policies from-zone untrust to-zone trust policy default-deny then log session-init

Item Details

Audit Name: DISA Juniper SRX Services Gateway ALG v3r2

Category: SYSTEM AND INFORMATION INTEGRITY

Plugin: Juniper

Control ID: 4818ae0fff55b39e3d5815f028323f67bd3f701e608a7ef05e830ecea9b1e369

Detections

Analytics

Information

Solution

See Also

Item Details