ESXI-06-000045 - The system must enable a persistent log location for all locally stored logs.

Information

ESXi can be configured to store log files on an in-memory file system. This occurs when the host's '/scratch' directory is linked to '/tmp/scratch'. When this is done only a single day's worth of logs are stored at any time. In addition log files will be reinitialized upon each reboot. This presents a security risk as user activity logged on the host is only stored temporarily and will not persistent across reboots. This can also complicate auditing and make it harder to monitor events and diagnose issues. ESXi host logging should always be configured to a persistent datastore.

Note: Scratch space is configured automatically during installation or first boot of an ESXi host, and does not usually need to be manually configured. ESXi Installable creates a 4 GB Fat16 partition on the target device during installation if there is sufficient space, and if the device is considered Local. If ESXi is installed on an SD card or USB device a persistent log location may not be configured upon install as normal.

Solution

From the vSphere Client select the ESXi Host and go to Configuration >> Advanced Settings. Select the Syslog.global.logDir value and set it to a known persistent location.

or

From a PowerCLI command prompt while connected to the ESXi host run the following commands:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.logDir | Set-AdvancedSetting -Value 'New Log Location'

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_VMware_vSphere_6-0_ESXi_V1R5_STIG.zip

Item Details

Category: AUDIT AND ACCOUNTABILITY

References: 800-53|AU-4, CAT|II, CCI|CCI-001849, Group-ID|V-63259, Rule-ID|SV-77749r1_rule, STIG-ID|ESXI-06-000045, Vuln-ID|V-63259

Plugin: VMware

Control ID: bcf8785db4cdf26f8b4fd37de0c18e936d4e9d282655488ae773f6521086cb44