| ARST-RT-000610 - The Arista perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000630 - The Arista perimeter router must be configured to have Link Layer Discovery Protocols (LLDPs) disabled on all external interfaces. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000660 - The Arista multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join only multicast groups that have been approved by the organization. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000670 - The Arista multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000830 - The perimeter router must be configured to block all packets with any IP options. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000840 - The PE router must be configured to ignore or block all packets with any IP options. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| CASA-FW-000250 - The Cisco ASA perimeter firewall must be configured to block all outbound management traffic - ACL | DISA STIG Cisco ASA FW v2r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000392 - The Cisco perimeter switch must be configured to drop IPv6 undetermined transport packets. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000393 - The Cisco perimeter switch must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | DISA STIG Cisco IOS Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000393 - The Cisco perimeter switch must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000394 - The Cisco perimeter switch must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter switch must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter switch must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA STIG Cisco IOS Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000396 - The Cisco perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000396 - The Cisco perimeter switch must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | DISA STIG Cisco IOS Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000396 - The Cisco perimeter switch must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter switch must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA STIG Cisco IOS Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter switch must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA STIG Cisco IOS XE Switch RTR v3r1 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| FNFG-FW-000115 - The FortiGate firewall must apply ingress filters to traffic that is inbound to the network through any active external interface. | DISA Fortigate Firewall STIG v1r3 | FortiGate | SYSTEM AND COMMUNICATIONS PROTECTION |
| FNFG-FW-000125 - When employed as a premise firewall, FortiGate must block all outbound management traffic. | DISA Fortigate Firewall STIG v1r3 | FortiGate | SYSTEM AND COMMUNICATIONS PROTECTION |
| FNFG-FW-000130 - The FortiGate firewall must restrict traffic entering the VPN tunnels to the management network to only the authorized management packets based on destination address. | DISA Fortigate Firewall STIG v1r3 | FortiGate | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000280 - The Juniper router must not be configured to have any feature enabled that calls home to the vendor. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000730 - The Juniper perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000750 - The Juniper perimeter router must be configured to have Link Layer Discovery Protocols (LLDPs) disabled on all external interfaces. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000760 - The Juniper perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000780 - The Juniper multicast Designated Router (DR) must be configured to filter the IGMP and MLD Report messages to allow hosts to join only multicast groups that have been approved by the organization. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000790 - The Juniper multicast Designated Router (DR) must be configured to filter the IGMP and MLD Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000800 - The Juniper Multicast Source Discovery Protocol (MSDP) router must be configured to only accept MSDP packets from known MSDP peers. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000810 - The Juniper perimeter router must be configured to drop fragmented IPv6 packets where the first fragment does not include the entire IPv6 header chain. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000820 - The Juniper perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3255. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000830 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000840 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000850 - The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000870 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA Juniper EX Series Router v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000382 - The Juniper perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3255. | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000383 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000385 - The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option - dstops | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000385 - The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option - hop-by-hop | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000386 - The Juniper perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000387 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type - dstops | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000387 - The Juniper perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type - hop-by-hop | DISA STIG Juniper Router RTR v3r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
