| CISC-L2-000020 - The Cisco switch must uniquely identify all network-connected endpoint devices before establishing any connection. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-L2-000060 - The Cisco switch must be configured for authorized users to select a user session to capture. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-L2-000100 - The Cisco switch must have BPDU Guard enabled on all user-facing or untrusted access switch ports. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000120 - The Cisco switch must have Unknown Unicast Flood Blocking (UUFB) enabled. | DISA Cisco IOS XE Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000130 - The Cisco switch must have DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000140 - The Cisco switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000160 - The Cisco switch must have Storm Control configured on all host-facing switchports. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-L2-000180 - The Cisco switch must implement Rapid STP where VLANs span multiple switches with redundant links. | DISA Cisco IOS XE Switch L2S STIG v3r2 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-L2-000190 - The Cisco switch must enable Unidirectional Link Detection (UDLD) to protect against one-way connections. | DISA Cisco IOS XE Switch L2S STIG v3r2 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-L2-000210 - The Cisco switch must have all disabled switch ports assigned to an unused VLAN. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000220 - The Cisco switch must not have the default VLAN assigned to any host-facing switch ports. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000230 - The Cisco switch must have the default VLAN pruned from all trunk ports that do not require it. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000230 - The Cisco switch must have the default VLAN pruned from all trunk ports that do not require it. | DISA Cisco IOS XE Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000240 - The Cisco switch must not use the default VLAN for management traffic. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | CONTINGENCY PLANNING |
| CISC-L2-000250 - The Cisco switch must have all user-facing or untrusted ports configured as access switch ports. | DISA Cisco NX OS Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-L2-000270 - The Cisco switch must not have any switchports assigned to the native VLAN. | DISA Cisco IOS XE Switch L2S STIG v3r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-ND-000160 - The Cisco switch must be configured to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device. | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-ND-000160 - The Cisco switch must be configured to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device. | DISA Cisco IOS XE Switch NDM STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-ND-000620 - The Cisco switch must only store cryptographic representations of passwords. | DISA Cisco IOS XE Switch NDM STIG v3r4 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-ND-000980 - The Cisco switch must be configured to allocate audit record storage capacity in accordance with organization-defined audit record storage requirements. | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-ND-001200 - The Cisco switch must be configured to use FIPS-validated Keyed-Hash Message Authentication Code (HMAC) to protect the integrity of remote maintenance sessions. | DISA Cisco IOS XE Switch NDM STIG v3r4 | Cisco | IDENTIFICATION AND AUTHENTICATION, MAINTENANCE |
| CISC-ND-001210 - The Cisco switch must be configured to implement cryptographic mechanisms to protect the confidentiality of remote maintenance sessions. | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | MAINTENANCE |
| CISC-ND-001220 - The Cisco switch must be configured to protect against known types of denial-of-service (DoS) attacks by employing organization-defined security safeguards. | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-ND-001440 - The Cisco switch must be configured to obtain its public key certificates from an appropriate certificate policy through an approved service provider. | DISA Cisco IOS XE Switch NDM STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-ND-001450 - The Cisco switch must be configured to send log data to at least two central log servers for the purpose of forwarding alerts to the administrators and the information system security officer (ISSO). | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-ND-001470 - The Cisco switch must be running an IOS release that is currently supported by Cisco Systems. | DISA Cisco NX OS Switch NDM STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT, SYSTEM AND INFORMATION INTEGRITY |
| CISC-ND-001470 - The Cisco switch must be running an IOS release that is currently supported by Cisco Systems. | DISA Cisco IOS XE Switch NDM STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT, SYSTEM AND INFORMATION INTEGRITY |
| CISC-RT-000060 - The Cisco switch must be configured to have all inactive layer 3 interfaces disabled. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000120 - The Cisco switch must be configured to protect against or limit the effects of denial-of-service (DoS) attacks by employing control plane protection. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000170 - The Cisco switch must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000237 - The Cisco switch must not be configured to use IPv6 Site Local Unicast addresses. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000450 - The Cisco switch must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000470 - The Cisco BGP switch must be configured to check whether a single-hop eBGP peer is directly connected. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000480 - The Cisco BGP switch must be configured to use a unique key for each autonomous system (AS) that it peers with. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL, CONFIGURATION MANAGEMENT |
| CISC-RT-000500 - The Cisco BGP switch must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS). | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000530 - The Cisco BGP switch must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000540 - The Cisco BGP switch must be configured to reject route advertisements from BGP peers that do not list their autonomous system (AS) number as the first AS in the AS_PATH attribute. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000590 - The Cisco MPLS switch must be configured to use its loopback address as the source address for LDP peering sessions. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000600 - The Cisco MPLS switch must be configured to synchronize Interior Gateway Protocol (IGP) and LDP to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000630 - The Cisco PE switch must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE switch must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000710 - The Cisco PE switch must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE switch must be configured to block any traffic that is destined to the IP core infrastructure. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000740 - The Cisco PE switch must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000800 - The Cisco multicast switch must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000820 - The Cisco multicast Rendezvous Point (RP) switch must be configured to limit the multicast forwarding cache so that its resources are not saturated by managing an overwhelming number of Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP) source-active entries. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000860 - The Cisco multicast Designated switch (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join only multicast groups that have been approved by the organization. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000890 - The Cisco multicast Designated switch (DR) must be configured to set the shortest-path tree (SPT) threshold to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000900 - The Cisco Multicast Source Discovery Protocol (MSDP) switch must be configured to only accept MSDP packets from known MSDP peers. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000920 - The Cisco Multicast Source Discovery Protocol (MSDP) switch must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources. | DISA Cisco NX OS Switch RTR STIG v3r3 | Cisco | ACCESS CONTROL |
