| 1.2 Ensure security contact information is registered | CIS Amazon Web Services Foundations L1 3.0.0 | amazon_aws | CONTINGENCY PLANNING, INCIDENT RESPONSE |
| ARST-L2-000200 - The Arista MLS layer 2 switch must not use the default VLAN for management traffic. | DISA STIG Arista MLS EOS 4.2x L2S v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000690 - The Arista BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000700 - The MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000730 - The PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000740 - The PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000750 - The PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000760 - The PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| ARST-RT-000770 - The Arista Multicast Source Discovery Protocol (MSDP) router must be configured to use its loopback address as the source address when originating MSDP traffic. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| CISC-L2-000240 - The Cisco switch must not use the default VLAN for management traffic. | DISA STIG Cisco IOS XE Switch L2S v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-L2-000240 - The Cisco switch must not use the default VLAN for management traffic. | DISA STIG Cisco IOS Switch L2S v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-L2-000240 - The Cisco switch must not use the default VLAN for management traffic. | DISA STIG Cisco NX-OS Switch L2S v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions - bgp neighbor | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions - bgp neighbor | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions - interface | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions - interface | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000580 - The Cisco BGP switch must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions - loopback | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions - mpls router-id | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS switch must be configured to use its loopback address as the source address for LDP peering sessions. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000630 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000630 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000630 - The Cisco PE switch must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE switch must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000650 - The Cisco PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000650 - The Cisco PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000650 - The Cisco PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000650 - The Cisco PE switch must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate pseudowire ID for each attachment circuit - l2vpn encapsulation | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate pseudowire ID for each attachment circuit - xconnect group | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE switch providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000680 - The Cisco PE switch providing Virtual Private LAN Services (VPLS) must be configured to have all attachment circuits defined to the virtual forwarding instance (VFI) with the globally unique VPN ID assigned for each customer VLAN. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA STIG Cisco IOS XE Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA STIG Cisco IOS-XR Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA STIG Cisco IOS Router RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) switch must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA STIG Cisco NX-OS Switch RTR v3r1 | Cisco | CONTINGENCY PLANNING |
| JUNI-RT-000560 - The Juniper BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
| JUNI-RT-000570 - The Juniper MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
| JUNI-RT-000610 - The Juniper PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
| JUNI-RT-000630 - The Juniper PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
| JUNI-RT-000650 - The Juniper PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
| JUNI-RT-000660 - The Juniper PE router providing Virtual Private LAN Services (VPLS) must be configured to have all attachment circuits defined to the routing instance with the globally unique VPLS ID assigned for each customer VLAN. | DISA STIG Juniper Router RTR v3r1 | Juniper | CONTINGENCY PLANNING |
