The set_pixel_format function in ui/vnc.c in QEMU allows remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value.

kvm was updated to fix 16 security issues. These security issues were fixed :

  - CVE-2015-6815: e1000 NIC emulation support was     vulnerable to an infinite loop issue. A privileged user     inside guest could have used this flaw to crash the Qemu     instance resulting in DoS. (bsc#944697).

  - CVE-2016-2391: The ohci_bus_start function in the USB     OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU     allowed local guest OS administrators to cause a denial     of service (NULL pointer dereference and QEMU process     crash) via vectors related to multiple eof_timers     (bsc#967013).

  - CVE-2016-2392: The is_rndis function in the USB Net     device emulator (hw/usb/dev-network.c) in QEMU did not     properly validate USB configuration descriptor objects,     which allowed local guest OS administrators to cause a     denial of service (NULL pointer dereference and QEMU     process crash) via vectors involving a remote NDIS     control message packet (bsc#967012).

  - CVE-2016-4453: The vmsvga_fifo_run function in     hw/display/vmware_vga.c in QEMU allowed local guest OS     administrators to cause a denial of service (infinite     loop and QEMU process crash) via a VGA command     (bsc#982223).

  - CVE-2016-4454: The vmsvga_fifo_read_raw function in     hw/display/vmware_vga.c in QEMU allowed local guest OS     administrators to obtain sensitive host memory     information or cause a denial of service (QEMU process     crash) by changing FIFO registers and issuing a VGA     command, which triggers an out-of-bounds read     (bsc#982222).

  - CVE-2016-5105: The megasas_dcmd_cfg_read function in     hw/scsi/megasas.c in QEMU, when built with MegaRAID SAS     8708EM2 Host Bus Adapter emulation support, used an     uninitialized variable, which allowed local guest     administrators to read host memory via vectors involving     a MegaRAID Firmware Interface (MFI) command     (bsc#982017).

  - CVE-2016-5106: The megasas_dcmd_set_properties function     in hw/scsi/megasas.c in QEMU, when built with MegaRAID     SAS 8708EM2 Host Bus Adapter emulation support, allowed     local guest administrators to cause a denial of service     (out-of-bounds write access) via vectors involving a     MegaRAID Firmware Interface (MFI) command (bsc#982018).

  - CVE-2016-5107: The megasas_lookup_frame function in     QEMU, when built with MegaRAID SAS 8708EM2 Host Bus     Adapter emulation support, allowed local guest OS     administrators to cause a denial of service     (out-of-bounds read and crash) via unspecified vectors     (bsc#982019).

  - CVE-2016-5126: Heap-based buffer overflow in the     iscsi_aio_ioctl function in block/iscsi.c in QEMU     allowed local guest OS users to cause a denial of     service (QEMU process crash) or possibly execute     arbitrary code via a crafted iSCSI asynchronous I/O     ioctl call (bsc#982285).

  - CVE-2016-5238: The get_cmd function in hw/scsi/esp.c in     QEMU allowed local guest OS administrators to cause a     denial of service (out-of-bounds write and QEMU process     crash) via vectors related to reading from the     information transfer buffer in non-DMA mode     (bsc#982959).

  - CVE-2016-5337: The megasas_ctrl_get_info function in     hw/scsi/megasas.c in QEMU allowed local guest OS     administrators to obtain sensitive host memory     information via vectors related to reading device     control information (bsc#983961).

  - CVE-2016-5338: The (1) esp_reg_read and (2)     esp_reg_write functions in hw/scsi/esp.c in QEMU allowed     local guest OS administrators to cause a denial of     service (QEMU process crash) or execute arbitrary code     on the QEMU host via vectors related to the information     transfer buffer (bsc#983982).

  - CVE-2016-5403: The virtqueue_pop function in     hw/virtio/virtio.c in QEMU allowed local guest OS     administrators to cause a denial of service (memory     consumption and QEMU process crash) by submitting     requests without waiting for completion (bsc#991080).

  - CVE-2016-6490: Infinite loop in the virtio framework. A     privileged user inside the guest could have used this     flaw to crash the Qemu instance on the host resulting in     DoS (bsc#991466).

  - CVE-2016-7116: Host directory sharing via Plan 9 File     System(9pfs) was vulnerable to a directory/path     traversal issue. A privileged user inside guest could     have used this flaw to access undue files on the host     (bsc#996441).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     in QEMU allowed remote attackers to cause a denial of     service (crash) via a small bytes_per_pixel value     (bsc#902737).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

xen was updated to fix 36 security issues.

These security issues were fixed :

  - CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might     have allowed remote attackers to execute arbitrary code     via vectors related to the number of timers     (bnc#864673).

  - CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c     allowed remote attackers to cause a denial of service     and possibly execute arbitrary code via a large log_num     value in a savevm image (bnc#864678).

  - CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed     remote attackers to cause a denial of service or     possibly execute arbitrary code via crafted tx_fifo_head     and rx_fifo_head values in a savevm image (bnc#864682).

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#864655).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (bsc#864811).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#864391).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#864769).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#864805).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#877642).

  - CVE-2014-3640: The sosendto function in slirp/udp.c     allowed local users to cause a denial of service (NULL     pointer dereference) by sending a udp packet with a     value of 0 in the source port and address, which     triggers access of an uninitialized socket (bsc#897654).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#901508).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#902737).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (bsc#928393).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (bsc#945404).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#957162).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956829).

  - CVE-2015-8504: VNC: floating point exception     (bsc#958491).

  - CVE-2015-8550: Paravirtualized drivers were incautious     about shared memory contents (XSA-155) (bsc#957988).

  - CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling     (XSA-164) (bsc#958007).

  - CVE-2015-8555: Information leak in legacy x86 FPU/XMM     initialization (XSA-165) (bsc#958009).

  - CVE-2015-8558: Infinite loop in ehci_advance_state     resulted in DoS (bsc#959005).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1571: VMX: intercept issue with INVLPG on     non-canonical address (XSA-168) (bsc#960862).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (bsc#965315).

  - CVE-2016-2271: VMX when using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (bsc#965317).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967013).

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967012).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#967969).

  - CVE-2016-2841: ne2000: Infinite loop in ne2000_receive     (bsc#969350).

  - XSA-166: ioreq handling possibly susceptible to multiple     read issue (bsc#958523).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Xen was updated to fix the following security issues :

CVE-2016-2841: net: ne2000: infinite loop in ne2000_receive (bsc#969351)

CVE-2016-2391: usb: multiple eof_timers in ohci module leads to NULL pointer dereference (bsc#967101)

CVE-2016-2270: x86: inconsistent cachability flags on guest mappings (XSA-154) (bsc#965315)

CVE-2016-2271: VMX: guest user mode may crash guest with non-canonical RIP (XSA-170) (bsc#965317)

CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#964947)

CVE-2014-0222: qcow1: validate L2 table size to avoid integer overflows (bsc#964925)

CVE-2014-7815: vnc: insufficient bits_per_pixel from the client sanitization (bsc#962627)

CVE-2015-8743: ne2000: OOB memory access in ioport r/w functions (bsc#960726)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

xen was updated to fix 46 security issues.

These security issues were fixed :

  - CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might     have allowed remote attackers to execute arbitrary code     via vectors related to the number of timers     (bsc#964746).

  - CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c     allowed remote attackers to cause a denial of service     and possibly execute arbitrary code via a large log_num     value in a savevm image (bsc#964929).

  - CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed     remote attackers to cause a denial of service or     possibly execute arbitrary code via crafted tx_fifo_head     and rx_fifo_head values in a savevm image (bsc#964950).

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#964644).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (bsc#964452).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#962642).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#962335).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#962758).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#964925).

  - CVE-2014-3640: The sosendto function in slirp/udp.c     allowed local users to cause a denial of service (NULL     pointer dereference) by sending a udp packet with a     value of 0 in the source port and address, which     triggers access of an uninitialized socket (bsc#965112).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#962611).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#962627).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (bsc#964431).

  - CVE-2015-1779: The VNC websocket frame decoder allowed     remote attackers to cause a denial of service (memory     and CPU consumption) via a large (1) websocket payload     or (2) HTTP headers section (bsc#962632).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#964947).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (bsc#965156).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#962360).

  - CVE-2015-7549: pci: NULL pointer dereference issue     (bsc#958918).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956832).

  - CVE-2015-8504: VNC: floating point exception     (bsc#958493).

  - CVE-2015-8550: Paravirtualized drivers were incautious     about shared memory contents (XSA-155) (bsc#957988).

  - CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling     (XSA-164) (bsc#958007).

  - CVE-2015-8555: Information leak in legacy x86 FPU/XMM     initialization (XSA-165) (bsc#958009).

  - CVE-2015-8558: Infinite loop in ehci_advance_state     resulted in DoS (bsc#959006).

  - CVE-2015-8567: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8568: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8613: SCSI: stack-based buffer overflow in     megasas_ctrl_get_info (bsc#961358).

  - CVE-2015-8619: Stack based OOB write in hmp_sendkey     routine (bsc#965269).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960726).

  - CVE-2015-8744: vmxnet3: Incorrect l2 header validation     lead to a crash via assert(2) call (bsc#960836).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2015-8817: OOB access in address_space_rw lead to     segmentation fault (I) (bsc#969125).

  - CVE-2015-8818: OOB access in address_space_rw lead to     segmentation fault (II) (bsc#969126).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1571: VMX: intercept issue with INVLPG on     non-canonical address (XSA-168) (bsc#960862).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961692).

  - CVE-2016-1922: NULL pointer dereference in vapic_write()     (bsc#962321).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963783).

  - CVE-2016-2198: EHCI NULL pointer dereference in     ehci_caps_write (bsc#964415).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (bsc#965315).

  - CVE-2016-2271: VMX when using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (bsc#965317).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967101).

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967090).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#968004).

  - XSA-166: ioreq handling possibly susceptible to multiple     read issue (bsc#958523).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

xen was updated to fix 27 security issues.

These security issues were fixed :

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#864655).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (bsc#864811).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#864391).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#864769).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#864805).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#877642).

  - CVE-2014-3640: The sosendto function in slirp/udp.c     allowed local users to cause a denial of service (NULL     pointer dereference) by sending a udp packet with a     value of 0 in the source port and address, which     triggers access of an uninitialized socket (bsc#897654).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#901508).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#902737).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#957162).

  - CVE-2015-8504: VNC: floating point exception     (bsc#958491).

  - CVE-2015-8550: Paravirtualized drivers were incautious     about shared memory contents (XSA-155) (bsc#957988).

  - CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling     (XSA-164) (bsc#958007).

  - CVE-2015-8555: Information leak in legacy x86 FPU/XMM     initialization (XSA-165) (bsc#958009).

  - CVE-2015-8558: Infinite loop in ehci_advance_state     resulted in DoS (bsc#959005).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1571: VMX: intercept issue with INVLPG on     non-canonical address (XSA-168) (bsc#960862).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (bsc#965315).

  - CVE-2016-2271: VMX when using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (bsc#965317).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967013).

  - CVE-2016-2841: ne2000: Infinite loop in ne2000_receive     (bsc#969350).

  - XSA-166: ioreq handling possibly susceptible to multiple     read issue (bsc#958523).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

xen was updated to version 4.4.4 to fix 33 security issues.

These security issues were fixed :

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967012).

  - CVE-2015-5239: Integer overflow in vnc_client_read() and     protocol_client_msg() (bsc#944463).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (boo#965315).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#967969).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (boo#962360).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (boo#962611).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2198: EHCI NULL pointer dereference in     ehci_caps_write (bsc#964413).

  - CVE-2015-6815: e1000: infinite loop issue (bsc#944697).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (boo#964925).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (boo#965156).

  - CVE-2016-2271: VMX in using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (boo#965317).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (boo#964452).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (boo#962642).

  - CVE-2015-1779: The VNC websocket frame decoder allowed     remote attackers to cause a denial of service (memory     and CPU consumption) via a large (1) websocket payload     or (2) HTTP headers section (boo#962632).

  - CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed     remote attackers to cause a denial of service or     possibly execute arbitrary code via crafted tx_fifo_head     and rx_fifo_head values in a savevm image (boo#964950).

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (boo#964644).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c allowed     remote attackers to execute arbitrary code via a crafted     (1) precision, (2) nextprecision, (3) function, or (4)     nextfunction value in a savevm image (boo#962758).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (boo#962335).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956829).

  - CVE-2015-8613: scsi: stack based buffer overflow in     megasas_ctrl_get_info (bsc#961358).

  - CVE-2015-8619: Stack based OOB write in hmp_sendkey     routine (bsc#960334).

  - CVE-2016-1571: The paging_invlpg function in     include/asm-x86/paging.h, when using shadow mode paging     or nested virtualization is enabled, allowed local HVM     guest users to cause a denial of service (host crash)     via a non-canonical guest address in an INVVPID     instruction, which triggers a hypervisor bug check     (boo#960862).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (boo#960861).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (boo#964431).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8744: vmxnet3: incorrect l2 header validation     leads to a crash via assert(2) call (bsc#960835).

  - CVE-2015-8745: Reading IMR registers could have lead to     a crash via assert(2) call (bsc#960707).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (boo#962627).

  - CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c     allowed remote attackers to cause a denial of service     and possibly execute arbitrary code via a large log_num     value in a savevm image (boo#964929).

xen was updated to fix 47 security issues.

These security issues were fixed :

  - CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might     have allowed remote attackers to execute arbitrary code     via vectors related to the number of timers     (bnc#864673).

  - CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c     allowed remote attackers to cause a denial of service     and possibly execute arbitrary code via a large log_num     value in a savevm image (bnc#864678).

  - CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed     remote attackers to cause a denial of service or     possibly execute arbitrary code via crafted tx_fifo_head     and rx_fifo_head values in a savevm image (bnc#864682).

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#864655).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (bsc#864811).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#864391).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#864769).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#864805).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#877642).

  - CVE-2014-3640: The sosendto function in slirp/udp.c     allowed local users to cause a denial of service (NULL     pointer dereference) by sending a udp packet with a     value of 0 in the source port and address, which     triggers access of an uninitialized socket (bsc#897654).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#901508).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#902737).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (bsc#928393).

  - CVE-2015-1779: The VNC websocket frame decoder allowed     remote attackers to cause a denial of service (memory     and CPU consumption) via a large (1) websocket payload     or (2) HTTP headers section (bsc#924018).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (bsc#945404).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#957162).

  - CVE-2015-7549: pci: NULL pointer dereference issue     (bsc#958917).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956829).

  - CVE-2015-8504: VNC: floating point exception     (bsc#958491).

  - CVE-2015-8550: Paravirtualized drivers were incautious     about shared memory contents (XSA-155) (bsc#957988).

  - CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling     (XSA-164) (bsc#958007).

  - CVE-2015-8555: Information leak in legacy x86 FPU/XMM     initialization (XSA-165) (bsc#958009).

  - CVE-2015-8558: Infinite loop in ehci_advance_state     resulted in DoS (bsc#959005).

  - CVE-2015-8567: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8568: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8613: SCSI: stack-based buffer overflow in     megasas_ctrl_get_info (bsc#961358).

  - CVE-2015-8619: Stack based OOB write in hmp_sendkey     routine (bsc#960334).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8744: vmxnet3: Incorrect l2 header validation     lead to a crash via assert(2) call (bsc#960835).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2015-8817: OOB access in address_space_rw lead to     segmentation fault (I) (bsc#969121).

  - CVE-2015-8818: OOB access in address_space_rw lead to     segmentation fault (II) (bsc#969122).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1571: VMX: intercept issue with INVLPG on     non-canonical address (XSA-168) (bsc#960862).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2016-1922: NULL pointer dereference in vapic_write()     (bsc#962320).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2198: EHCI NULL pointer dereference in     ehci_caps_write (bsc#964413).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (bsc#965315).

  - CVE-2016-2271: VMX when using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (bsc#965317).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967013).

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967012).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#967969).

  - CVE-2016-2841: ne2000: Infinite loop in ne2000_receive     (bsc#969350).

  - XSA-166: ioreq handling possibly susceptible to multiple     read issue (bsc#958523).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

xen was updated to fix 26 security issues.

These security issues were fixed :

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#864655).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#864391).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#864769).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#864805).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#877642).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#901508).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#902737).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (bsc#928393).

  - CVE-2015-1779: The VNC websocket frame decoder allowed     remote attackers to cause a denial of service (memory     and CPU consumption) via a large (1) websocket payload     or (2) HTTP headers section (bsc#924018).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (bsc#945404).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#957162).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956829).

  - CVE-2015-8613: SCSI: stack based buffer overflow in     megasas_ctrl_get_info (bsc#961358).

  - CVE-2015-8619: Stack based OOB write in hmp_sendkey     routine (bsc#960334).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8744: vmxnet3: Incorrect l2 header validation     lead to a crash via assert(2) call (bsc#960835).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2198: EHCI NULL pointer dereference in     ehci_caps_write (bsc#964413).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967013).

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967012).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#967969).

These non-security issues were fixed :

  - bsc#954872: script block-dmmd not working as expected 

  - bsc#957698: DOM0 can't bring up on Dell PC

  - bsc#963923: domain weights not honored when sched-credit     tslice is reduced

  - bsc#959332: SLES12SP1 PV guest is unreachable when     restored or migrated

  - bsc#959695: Missing docs for xen

xen was updated to fix 44 security issues.

These security issues were fixed :

  - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load     function in hw/arm/pxa2xx.c allowed remote attackers to     cause a denial of service or possibly execute arbitrary     code via a crafted s->rx_level value in a savevm image     (bsc#864655).

  - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c     allowed remote attackers to cause a denial of service or     possibly execute arbitrary code via vectors related to     IRQDest elements (bsc#864811).

  - CVE-2013-4537: The ssi_sd_transfer function in     hw/sd/ssi-sd.c allowed remote attackers to execute     arbitrary code via a crafted arglen value in a savevm     image (bsc#864391).

  - CVE-2013-4538: Multiple buffer overflows in the     ssd0323_load function in hw/display/ssd0323.c allowed     remote attackers to cause a denial of service (memory     corruption) or possibly execute arbitrary code via     crafted (1) cmd_len, (2) row, or (3) col values; (4)     row_start and row_end values; or (5) col_star and     col_end values in a savevm image (bsc#864769).

  - CVE-2013-4539: Multiple buffer overflows in the     tsc210x_load function in hw/input/tsc210x.c might have     allowed remote attackers to execute arbitrary code via a     crafted (1) precision, (2) nextprecision, (3) function,     or (4) nextfunction value in a savevm image     (bsc#864805).

  - CVE-2014-0222: Integer overflow in the qcow_open     function in block/qcow.c allowed remote attackers to     cause a denial of service (crash) via a large L2 table     in a QCOW version 1 image (bsc#877642).

  - CVE-2014-3640: The sosendto function in slirp/udp.c     allowed local users to cause a denial of service (NULL     pointer dereference) by sending a udp packet with a     value of 0 in the source port and address, which     triggers access of an uninitialized socket (bsc#897654).

  - CVE-2014-3689: The vmware-vga driver     (hw/display/vmware_vga.c) allowed local guest users to     write to qemu memory locations and gain privileges via     unspecified parameters related to rectangle handling     (bsc#901508).

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     allowed remote attackers to cause a denial of service     (crash) via a small bytes_per_pixel value (bsc#902737).

  - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces     in the IDE functionality had multiple interpretations of     a function's return value, which allowed guest OS users     to cause a host OS denial of service (memory consumption     or infinite loop, and system crash) via a PRDT with zero     complete sectors, related to the bmdma_prepare_buf and     ahci_dma_prepare_buf functions (bsc#928393).

  - CVE-2015-1779: The VNC websocket frame decoder allowed     remote attackers to cause a denial of service (memory     and CPU consumption) via a large (1) websocket payload     or (2) HTTP headers section (bsc#924018).

  - CVE-2015-5278: Infinite loop in ne2000_receive()     function (bsc#945989).

  - CVE-2015-6855: hw/ide/core.c did not properly restrict     the commands accepted by an ATAPI device, which allowed     guest users to cause a denial of service or possibly     have unspecified other impact via certain IDE commands,     as demonstrated by a WIN_READ_NATIVE_MAX command to an     empty drive, which triggers a divide-by-zero error and     instance crash (bsc#945404).

  - CVE-2015-7512: Buffer overflow in the pcnet_receive     function in hw/net/pcnet.c, when a guest NIC has a     larger MTU, allowed remote attackers to cause a denial     of service (guest OS crash) or execute arbitrary code     via a large packet (bsc#957162).

  - CVE-2015-7549: pci: NULL pointer dereference issue     (bsc#958917).

  - CVE-2015-8345: eepro100: infinite loop in processing     command block list (bsc#956829).

  - CVE-2015-8504: VNC: floating point exception     (bsc#958491).

  - CVE-2015-8550: Paravirtualized drivers were incautious     about shared memory contents (XSA-155) (bsc#957988).

  - CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling     (XSA-164) (bsc#958007).

  - CVE-2015-8555: Information leak in legacy x86 FPU/XMM     initialization (XSA-165) (bsc#958009).

  - CVE-2015-8558: Infinite loop in ehci_advance_state     resulted in DoS (bsc#959005).

  - CVE-2015-8567: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8568: vmxnet3: host memory leakage     (bsc#959387).

  - CVE-2015-8613: SCSI: stack-based buffer overflow in     megasas_ctrl_get_info (bsc#961358).

  - CVE-2015-8619: Stack based OOB write in hmp_sendkey     routine (bsc#960334).

  - CVE-2015-8743: ne2000: OOB memory access in ioport r/w     functions (bsc#960725).

  - CVE-2015-8744: vmxnet3: Incorrect l2 header validation     lead to a crash via assert(2) call (bsc#960835).

  - CVE-2015-8745: Reading IMR registers lead to a crash via     assert(2) call (bsc#960707).

  - CVE-2015-8817: OOB access in address_space_rw lead to     segmentation fault (I) (bsc#969121).

  - CVE-2015-8818: OOB access in address_space_rw lead to     segmentation fault (II) (bsc#969122).

  - CVE-2016-1568: AHCI use-after-free vulnerability in aio     port commands (bsc#961332).

  - CVE-2016-1570: The PV superpage functionality in     arch/x86/mm.c allowed local PV guests to obtain     sensitive information, cause a denial of service, gain     privileges, or have unspecified other impact via a     crafted page identifier (MFN) to the (1)     MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in     the HYPERVISOR_mmuext_op hypercall or (3) unknown     vectors related to page table updates (bsc#960861).

  - CVE-2016-1571: VMX: intercept issue with INVLPG on     non-canonical address (XSA-168) (bsc#960862).

  - CVE-2016-1714: nvram: OOB r/w access in processing     firmware configurations (bsc#961691).

  - CVE-2016-1922: NULL pointer dereference in vapic_write()     (bsc#962320).

  - CVE-2016-1981: e1000 infinite loop in start_xmit and     e1000_receive_iov routines (bsc#963782).

  - CVE-2016-2198: EHCI NULL pointer dereference in     ehci_caps_write (bsc#964413).

  - CVE-2016-2270: Xen allowed local guest administrators to     cause a denial of service (host reboot) via vectors     related to multiple mappings of MMIO pages with     different cachability settings (bsc#965315).

  - CVE-2016-2271: VMX when using an Intel or Cyrix CPU,     allowed local HVM guest users to cause a denial of     service (guest crash) via vectors related to a     non-canonical RIP (bsc#965317).

  - CVE-2016-2391: usb: multiple eof_timers in ohci module     lead to NULL pointer dereference (bsc#967013).

  - CVE-2016-2392: NULL pointer dereference in remote NDIS     control message handling (bsc#967012).

  - CVE-2016-2538: Integer overflow in remote NDIS control     message handling (bsc#967969).

  - CVE-2016-2841: ne2000: Infinite loop in ne2000_receive     (bsc#969350).

  - XSA-166: ioreq handling possibly susceptible to multiple     read issue (bsc#958523).

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

qemu was updated to fix several security issues and bugs.

The following vulnerabilities were fixed :

  - CVE-2015-5154: Heap-based buffer overflow in the IDE     subsystem in QEMU, when the container has a CDROM drive     enabled, allows local guest users to execute arbitrary     code on the host via unspecified ATAPI commands.
    (bsc#938344).

  - CVE-2015-5278: QEMU was vulnerable to an infinite loop     issue that could occur when receiving packets over the     network. (bsc#945989)

  - CVE-2015-5279: QEMU was vulnerable to a heap buffer     overflow issue that could occur when receiving packets     over the network. (bsc#945987)

  - CVE-2015-6855: QEMU was vulnerable to a divide by zero     issue that could occur while executing an IDE command     WIN_READ_NATIVE_MAX to determine the maximum size of a     drive. (bsc#945404)

  - CVE-2014-7815: The set_pixel_format function in ui/vnc.c     in QEMU allowed remote attackers to cause a denial of     service (crash) via a small bytes_per_pixel value.
    (bsc#902737) :

Also 

The update package also includes non-security fixes. See advisory for details.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The version of Citrix XenServer installed on the remote host is affected by multiple vulnerabilities :

  - A flaw exists in the VGA emulator in QEMU that allows a     local guest user to read host memory by setting the     display to a high resolution. (CVE-2014-3615)

  - A flaw exists in the set_pixel_format() function within     ui/vnc.c in QEMU that allows a remote attacker, using     a small bytes_per_pixel value, to cause a denial of     service condition. (CVE-2014-7815)

  - A heap-based buffer overflow flaw exists in the Cirrus     VGA emulator that allows local guest users to execute     arbitrary code via vectors related to blit regions.
    (CVE-2014-8106)

Note that environments that contain only PV guests are not vulnerable to these issues.

It was found that the Cirrus blit region checks were insufficient. A privileged guest user could use this flaw to write outside of VRAM- allocated buffer boundaries in the host's QEMU process address space with attacker-provided data. (CVE-2014-8106)

An uninitialized data structure use flaw was found in the way the set_pixel_format() function sanitized the value of bits_per_pixel. An attacker able to access a guest's VNC console could use this flaw to crash the guest. (CVE-2014-7815)

It was found that certain values that were read when loading RAM during migration were not validated. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.
(CVE-2014-7840)

A NULL pointer dereference flaw was found in the way QEMU handled UDP packets with a source port and address of 0 when QEMU's user networking was in use. A local guest user could use this flaw to crash the guest. (CVE-2014-3640)

Bug fixes :

  - The KVM utility executed demanding routing update system     calls every time it performed an MSI vector mask/unmask     operation. Consequently, guests running legacy systems     such as Scientific Linux 5 could, under certain     circumstances, experience significant slowdown. Now, the     routing system calls during mask/unmask operations are     skipped, and the performance of legacy guests is now     more consistent.

  - Due to a bug in the Internet Small Computer System     Interface (iSCSI) driver, a qemu-kvm process terminated     unexpectedly with a segmentation fault when the 'write     same' command was executed in guest mode under the iSCSI     protocol. This update fixes the bug, and the 'write     same' command now functions in guest mode under iSCSI as     intended.

  - The QEMU command interface did not properly handle     resizing of cache memory during guest migration, causing     QEMU to terminate unexpectedly with a segmentation     fault. This update fixes the related code, and QEMU no     longer crashes in the described situation.

Enhancements :

  - The maximum number of supported virtual CPUs (vCPUs) in     a KVM guest has been increased to 240. This increases     the number of virtual processing units that the user can     assign to the guest, and therefore improves its     performance potential.

  - Support for the 5th Generation Intel Core processors has     been added to the QEMU hypervisor, the KVM kernel code,     and the libvirt API. This allows KVM guests to use the     following instructions and features: ADCX, ADOX,     RDSFEED, PREFETCHW, and supervisor mode access     prevention (SMAP).

  - The 'dump-guest-memory' command now supports crash dump     compression. This makes it possible for users who cannot     use the 'virsh dump' command to require less hard disk     space for guest crash dumps. In addition, saving a     compressed guest crash dump frequently takes less time     than saving a non-compressed one.

Updated qemu packages fix multiple security vulnerabilities :

Sibiao Luo discovered that QEMU incorrectly handled device hot-unplugging. A local user could possibly use this flaw to cause a denial of service (CVE-2013-4377).

Michael S. Tsirkin discovered that QEMU incorrectly handled vmxnet3 devices. A local guest could possibly use this issue to cause a denial of service, or possibly execute arbitrary code on the host (CVE-2013-4544).

Multiple integer overflow, input validation, logic error, and buffer overflow flaws were discovered in various QEMU block drivers. An attacker able to modify a disk image file loaded by a guest could use these flaws to crash the guest, or corrupt QEMU process memory on the host, potentially resulting in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0143, CVE-2014-0144, CVE-2014-0145, CVE-2014-0147).

A buffer overflow flaw was found in the way the virtio_net_handle_mac() function of QEMU processed guest requests to update the table of MAC addresses. A privileged guest user could use this flaw to corrupt QEMU process memory on the host, potentially resulting in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0150).

A divide-by-zero flaw was found in the seek_to_sector() function of the parallels block driver in QEMU. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0142).

A NULL pointer dereference flaw was found in the QCOW2 block driver in QEMU. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0146).

It was found that the block driver for Hyper-V VHDX images did not correctly calculate BAT (Block Allocation Table) entries due to a missing bounds check. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0148).

An out-of-bounds memory access flaw was found in the way QEMU's IDE device driver handled the execution of SMART EXECUTE OFFLINE commands.
A privileged guest user could use this flaw to corrupt QEMU process memory on the host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-2894).

Two integer overflow flaws were found in the QEMU block driver for QCOW version 1 disk images. A user able to alter the QEMU disk image files loaded by a guest could use either of these flaws to corrupt QEMU process memory on the host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0222, CVE-2014-0223).

Multiple buffer overflow, input validation, and out-of-bounds write flaws were found in the way the virtio, virtio-net, virtio-scsi, and usb drivers of QEMU handled state loading after migration. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2013-4148, CVE-2013-4151, CVE-2013-4535, CVE-2013-4536, CVE-2013-4541, CVE-2013-4542, CVE-2013-6399, CVE-2014-0182, CVE-2014-3461).

An information leak flaw was found in the way QEMU's VGA emulator accessed frame buffer memory for high resolution displays. A privileged guest user could use this flaw to leak memory contents of the host to the guest by setting the display to use a high resolution in the guest (CVE-2014-3615).

When guest sends udp packet with source port and source addr 0, uninitialized socket is picked up when looking for matching and already created udp sockets, and later passed to sosendto() where NULL pointer dereference is hit during so->slirp->vnetwork_mask.s_addr access Only guests using qemu user networking are affected (CVE-2014-3640).

The Advanced Threat Research team at Intel Security reported that guest provided parameter were insufficiently validated in rectangle functions in the vmware-vga driver. A privileged guest user could use this flaw to write into qemu address space on the host, potentially escalating their privileges to those of the qemu host process (CVE-2014-3689).

It was discovered that QEMU incorrectly handled USB xHCI controller live migration. An attacker could possibly use this issue to cause a denial of service, or possibly execute arbitrary code (CVE-2014-5263).

James Spadaro of Cisco reported insufficiently sanitized bits_per_pixel from the client in the QEMU VNC display driver. An attacker having access to the guest's VNC console could use this flaw to crash the guest (CVE-2014-7815).

During migration, the values read from migration stream during ram load are not validated. Especially offset in host_from_stream_offset() and also the length of the writes in the callers of the said function.
A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-7840).

Paolo Bonzini of Red Hat discovered that the blit region checks were insufficient in the Cirrus VGA emulator in qemu. A privileged guest user could use this flaw to write into qemu address space on the host, potentially escalating their privileges to those of the qemu host process (CVE-2014-8106).

This update also provides usbredirparser 0.6 as a prerequisite of qemu-1.6.2

Updated qemu-kvm packages that fix multiple security issues, several bugs, and add various enhancements are now available for Red Hat Enterprise Linux 7.

Red Hat Product Security has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.

KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on AMD64 and Intel 64 systems. The qemu-kvm packages provide the user-space component for running virtual machines using KVM.

It was found that the Cirrus blit region checks were insufficient. A privileged guest user could use this flaw to write outside of VRAM-allocated buffer boundaries in the host's QEMU process address space with attacker-provided data. (CVE-2014-8106)

An uninitialized data structure use flaw was found in the way the set_pixel_format() function sanitized the value of bits_per_pixel. An attacker able to access a guest's VNC console could use this flaw to crash the guest. (CVE-2014-7815)

It was found that certain values that were read when loading RAM during migration were not validated. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.
(CVE-2014-7840)

A NULL pointer dereference flaw was found in the way QEMU handled UDP packets with a source port and address of 0 when QEMU's user networking was in use. A local guest user could use this flaw to crash the guest. (CVE-2014-3640)

Red Hat would like to thank James Spadaro of Cisco for reporting CVE-2014-7815, and Xavier Mehrenberger and Stephane Duverger of Airbus for reporting CVE-2014-3640. The CVE-2014-8106 issue was found by Paolo Bonzini of Red Hat, and the CVE-2014-7840 issue was discovered by Michael S. Tsirkin of Red Hat.

Bug fixes :

* The KVM utility executed demanding routing update system calls every time it performed an MSI vector mask/unmask operation. Consequently, guests running legacy systems such as Red Hat Enterprise Linux 5 could, under certain circumstances, experience significant slowdown.
Now, the routing system calls during mask/unmask operations are skipped, and the performance of legacy guests is now more consistent.
(BZ#1098976)

* Due to a bug in the Internet Small Computer System Interface (iSCSI) driver, a qemu-kvm process terminated unexpectedly with a segmentation fault when the 'write same' command was executed in guest mode under the iSCSI protocol. This update fixes the bug, and the 'write same' command now functions in guest mode under iSCSI as intended.
(BZ#1083413)

* The QEMU command interface did not properly handle resizing of cache memory during guest migration, causing QEMU to terminate unexpectedly with a segmentation fault. This update fixes the related code, and QEMU no longer crashes in the described situation. (BZ#1066338)

Enhancements :

* The maximum number of supported virtual CPUs (vCPUs) in a KVM guest has been increased to 240. This increases the number of virtual processing units that the user can assign to the guest, and therefore improves its performance potential. (BZ#1134408)

* Support for the 5th Generation Intel Core processors has been added to the QEMU hypervisor, the KVM kernel code, and the libvirt API. This allows KVM guests to use the following instructions and features:
ADCX, ADOX, RDSFEED, PREFETCHW, and supervisor mode access prevention (SMAP). (BZ#1116117)

* The 'dump-guest-memory' command now supports crash dump compression.
This makes it possible for users who cannot use the 'virsh dump' command to require less hard disk space for guest crash dumps. In addition, saving a compressed guest crash dump frequently takes less time than saving a non-compressed one. (BZ#1157798)

* This update introduces support for flight recorder tracing, which uses SystemTap to automatically capture qemu-kvm data while the guest machine is running. For detailed instructions on how to configure and use flight recorder tracing, see the Virtualization Deployment and Administration Guide, linked to in the References section below.
(BZ#1088112)

From Red Hat Security Advisory 2015:0349 :

Updated qemu-kvm packages that fix multiple security issues, several bugs, and add various enhancements are now available for Red Hat Enterprise Linux 7.

Red Hat Product Security has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.

KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on AMD64 and Intel 64 systems. The qemu-kvm packages provide the user-space component for running virtual machines using KVM.

It was found that the Cirrus blit region checks were insufficient. A privileged guest user could use this flaw to write outside of VRAM-allocated buffer boundaries in the host's QEMU process address space with attacker-provided data. (CVE-2014-8106)

An uninitialized data structure use flaw was found in the way the set_pixel_format() function sanitized the value of bits_per_pixel. An attacker able to access a guest's VNC console could use this flaw to crash the guest. (CVE-2014-7815)

It was found that certain values that were read when loading RAM during migration were not validated. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.
(CVE-2014-7840)

A NULL pointer dereference flaw was found in the way QEMU handled UDP packets with a source port and address of 0 when QEMU's user networking was in use. A local guest user could use this flaw to crash the guest. (CVE-2014-3640)

Red Hat would like to thank James Spadaro of Cisco for reporting CVE-2014-7815, and Xavier Mehrenberger and Stephane Duverger of Airbus for reporting CVE-2014-3640. The CVE-2014-8106 issue was found by Paolo Bonzini of Red Hat, and the CVE-2014-7840 issue was discovered by Michael S. Tsirkin of Red Hat.

Bug fixes :

* The KVM utility executed demanding routing update system calls every time it performed an MSI vector mask/unmask operation. Consequently, guests running legacy systems such as Red Hat Enterprise Linux 5 could, under certain circumstances, experience significant slowdown.
Now, the routing system calls during mask/unmask operations are skipped, and the performance of legacy guests is now more consistent.
(BZ#1098976)

* Due to a bug in the Internet Small Computer System Interface (iSCSI) driver, a qemu-kvm process terminated unexpectedly with a segmentation fault when the 'write same' command was executed in guest mode under the iSCSI protocol. This update fixes the bug, and the 'write same' command now functions in guest mode under iSCSI as intended.
(BZ#1083413)

* The QEMU command interface did not properly handle resizing of cache memory during guest migration, causing QEMU to terminate unexpectedly with a segmentation fault. This update fixes the related code, and QEMU no longer crashes in the described situation. (BZ#1066338)

Enhancements :

* The maximum number of supported virtual CPUs (vCPUs) in a KVM guest has been increased to 240. This increases the number of virtual processing units that the user can assign to the guest, and therefore improves its performance potential. (BZ#1134408)

* Support for the 5th Generation Intel Core processors has been added to the QEMU hypervisor, the KVM kernel code, and the libvirt API. This allows KVM guests to use the following instructions and features:
ADCX, ADOX, RDSFEED, PREFETCHW, and supervisor mode access prevention (SMAP). (BZ#1116117)

* The 'dump-guest-memory' command now supports crash dump compression.
This makes it possible for users who cannot use the 'virsh dump' command to require less hard disk space for guest crash dumps. In addition, saving a compressed guest crash dump frequently takes less time than saving a non-compressed one. (BZ#1157798)

* This update introduces support for flight recorder tracing, which uses SystemTap to automatically capture qemu-kvm data while the guest machine is running. For detailed instructions on how to configure and use flight recorder tracing, see the Virtualization Deployment and Administration Guide, linked to in the References section below.
(BZ#1088112)

Updated qemu-kvm-rhev packages that fix multiple security issues, several bugs, and add various enhancements are now available for Red Hat Enterprise Virtualization Hypervisor 7.

Red Hat Product Security has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.

KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on AMD64 and Intel 64 systems. The qemu-kvm-rhev package provides the user-space component for running virtual machines using KVM, in environments managed by Red Hat Enterprise Virtualization Manager.

It was found that the Cirrus blit region checks were insufficient. A privileged guest user could use this flaw to write outside of VRAM-allocated buffer boundaries in the host's QEMU process address space with attacker-provided data. (CVE-2014-8106)

An uninitialized data structure use flaw was found in the way the set_pixel_format() function sanitized the value of bits_per_pixel. An attacker able to access a guest's VNC console could use this flaw to crash the guest. (CVE-2014-7815)

It was found that certain values that were read when loading RAM during migration were not validated. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.
(CVE-2014-7840)

A NULL pointer dereference flaw was found in the way QEMU handled UDP packets with a source port and address of 0 when QEMU's user networking was in use. A local guest user could use this flaw to crash the guest. (CVE-2014-3640)

Red Hat would like to thank James Spadaro of Cisco for reporting CVE-2014-7815, and Xavier Mehrenberger and Stephane Duverger of Airbus for reporting CVE-2014-3640. The CVE-2014-8106 issue was found by Paolo Bonzini of Red Hat, and the CVE-2014-7840 issue was discovered by Michael S. Tsirkin of Red Hat.

This update provides the enhanced version of the qemu-kvm-rhev packages for Red Hat Enterprise Virtualization (RHEV) Hypervisor, which also fixes several bugs and adds various enhancements.

All Red Hat Enterprise Virtualization users with deployed virtualization hosts are advised to install these updated packages, which add this enhancement. After installing this update, shut down all running virtual machines. Once all virtual machines have shut down, start them again for this update to take effect.

The remote host is affected by the vulnerability described in GLSA-201412-01 (QEMU: Multiple Vulnerabilities)

    Multiple vulnerabilities have been discovered in QEMU. Please review the       CVE identifiers referenced below for details.
  Impact :

    A context-dependent attacker could cause a Denial of Service condition       and a local user can obtain sensitive information.
  Workaround :

    There is no known workaround at this time.

Updated qemu packages fix security vulnerabilities :

Michael S. Tsirkin discovered that QEMU incorrectly handled vmxnet3 devices. A local guest could possibly use this issue to cause a denial of service, or possibly execute arbitrary code on the host (CVE-2013-4544).

Multiple integer overflow, input validation, logic error, and buffer overflow flaws were discovered in various QEMU block drivers. An attacker able to modify a disk image file loaded by a guest could use these flaws to crash the guest, or corrupt QEMU process memory on the host, potentially resulting in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0143, CVE-2014-0144, CVE-2014-0145, CVE-2014-0147).

A buffer overflow flaw was found in the way the virtio_net_handle_mac() function of QEMU processed guest requests to update the table of MAC addresses. A privileged guest user could use this flaw to corrupt QEMU process memory on the host, potentially resulting in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0150).

A divide-by-zero flaw was found in the seek_to_sector() function of the parallels block driver in QEMU. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0142).

A NULL pointer dereference flaw was found in the QCOW2 block driver in QEMU. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0146).

It was found that the block driver for Hyper-V VHDX images did not correctly calculate BAT (Block Allocation Table) entries due to a missing bounds check. An attacker able to modify a disk image file loaded by a guest could use this flaw to crash the guest (CVE-2014-0148).

An out-of-bounds memory access flaw was found in the way QEMU's IDE device driver handled the execution of SMART EXECUTE OFFLINE commands.
A privileged guest user could use this flaw to corrupt QEMU process memory on the host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-2894).

Two integer overflow flaws were found in the QEMU block driver for QCOW version 1 disk images. A user able to alter the QEMU disk image files loaded by a guest could use either of these flaws to corrupt QEMU process memory on the host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2014-0222, CVE-2014-0223).

Multiple buffer overflow, input validation, and out-of-bounds write flaws were found in the way the virtio, virtio-net, virtio-scsi, and usb drivers of QEMU handled state loading after migration. A user able to alter the savevm data (either on the disk or over the wire during migration) could use either of these flaws to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process (CVE-2013-4148, CVE-2013-4151, CVE-2013-4535, CVE-2013-4536, CVE-2013-4541, CVE-2013-4542, CVE-2013-6399, CVE-2014-0182, CVE-2014-3461).

An information leak flaw was found in the way QEMU's VGA emulator accessed frame buffer memory for high resolution displays. A privileged guest user could use this flaw to leak memory contents of the host to the guest by setting the display to use a high resolution in the guest (CVE-2014-3615).

When guest sends udp packet with source port and source addr 0, uninitialized socket is picked up when looking for matching and already created udp sockets, and later passed to sosendto() where NULL pointer dereference is hit during so->slirp->vnetwork_mask.s_addr access Only guests using qemu user networking are affected (CVE-2014-3640).

The Advanced Threat Research team at Intel Security reported that guest provided parameter were insufficiently validated in rectangle functions in the vmware-vga driver. A privileged guest user could use this flaw to write into qemu address space on the host, potentially escalating their privileges to those of the qemu host process (CVE-2014-3689).

It was discovered that QEMU incorrectly handled USB xHCI controller live migration. An attacker could possibly use this issue to cause a denial of service, or possibly execute arbitrary code (CVE-2014-5263).

James Spadaro of Cisco reported insufficiently sanitized bits_per_pixel from the client in the QEMU VNC display driver. An attacker having access to the guest's VNC console could use this flaw to crash the guest (CVE-2014-7815).

Additionally qemu-1.6+ requires usbredir-0.6+ for USB redirection support which is also being provided with this advisory.

The remote Ubuntu 14.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-2409-1 advisory.

    Laszlo Ersek discovered that QEMU incorrectly handled memory in the vga device. A malicious guest could     possibly use this issue to read arbitrary host memory. This issue only affected Ubuntu 14.04 LTS and     Ubuntu 14.10. (CVE-2014-3615)

    Xavier Mehrenberger and Stephane Duverger discovered that QEMU incorrectly handled certain udp packets     when using guest networking. A malicious guest could possibly use this issue to cause a denial of service.
    (CVE-2014-3640)

    It was discovered that QEMU incorrectly handled parameter validation in the vmware_vga device. A malicious     guest could possibly use this issue to write into memory of the host, leading to privilege escalation.
    (CVE-2014-3689)

    It was discovered that QEMU incorrectly handled USB xHCI controller live migration. An attacker could     possibly use this issue to cause a denial of service, or possibly execute arbitrary code. This issue only     affected Ubuntu 14.04 LTS. (CVE-2014-5263)

    Michael S. Tsirkin discovered that QEMU incorrectly handled memory in the ACPI PCI hotplug interface. A     malicious guest could possibly use this issue to access memory of the host, leading to information     disclosure or privilege escalation. This issue only affected Ubuntu 14.04 LTS. (CVE-2014-5388)

    James Spadaro discovered that QEMU incorrectly handled certain VNC bytes_per_pixel values. An attacker     having access to a VNC console could possibly use this issue to cause a guest to crash, resulting in a     denial of service. (CVE-2014-7815)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

- CVE-2014-7815 vnc: insufficient bits_per_pixel from the     client sanitization (bz #1157647, bz #1157641)

    - CVE-2014-3689 vmware_vga: insufficient parameter       validation in rectangle functions (bz #1153038, bz       #1153035)

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

- CVE-2014-7815 vnc: insufficient bits_per_pixel from the     client sanitization (bz #1157647, bz #1157641)

    - CVE-2014-3689 vmware_vga: insufficient parameter       validation in rectangle functions (bz #1153038, bz       #1153035) Fix dep on numactl-devel to be build time       not install time

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several vulnerabilities were discovered in qemu-kvm, a full virtualization solution on x86 hardware.

  - CVE-2014-3689     The Advanced Threat Research team at Intel Security     reported that guest provided parameter were     insufficiently validated in rectangle functions in the     vmware-vga driver. A privileged guest user could use     this flaw to write into qemu address space on the host,     potentially escalating their privileges to those of the     qemu host process.

  - CVE-2014-7815     James Spadaro of Cisco reported insufficiently sanitized     bits_per_pixel from the client in the QEMU VNC display     driver. An attacker having access to the guest's VNC     console could use this flaw to crash the guest.

Several vulnerabilities were discovered in qemu, a fast processor emulator.

  - CVE-2014-3689     The Advanced Threat Research team at Intel Security     reported that guest provided parameter were     insufficiently validated in rectangle functions in the     vmware-vga driver. A privileged guest user could use     this flaw to write into qemu address space on the host,     potentially escalating their privileges to those of the     qemu host process.

  - CVE-2014-7815     James Spadaro of Cisco reported insufficiently sanitized     bits_per_pixel from the client in the QEMU VNC display     driver. An attacker having access to the guest's VNC     console could use this flaw to crash the guest.

ID	Name	Product	Family	Severity
94283	SUSE SLES11 Security Update : kvm (SUSE-SU-2016:2628-1)	Nessus	SuSE Local Security Checks	high
93177	SUSE SLES11 Security Update : xen (SUSE-SU-2016:1745-1)	Nessus	SuSE Local Security Checks	critical
91649	SUSE SLES10 Security Update : Xen (SUSE-SU-2016:1445-1)	Nessus	SuSE Local Security Checks	high
91249	SUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2016:1318-1)	Nessus	SuSE Local Security Checks	critical
90759	SUSE SLES11 Security Update : xen (SUSE-SU-2016:1154-1)	Nessus	SuSE Local Security Checks	critical
90478	openSUSE Security Update : xen (openSUSE-2016-439)	Nessus	SuSE Local Security Checks	critical
90396	SUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2016:0955-1)	Nessus	SuSE Local Security Checks	critical
90260	openSUSE Security Update : xen (openSUSE-2016-413)	Nessus	SuSE Local Security Checks	critical
90186	SUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2016:0873-1)	Nessus	SuSE Local Security Checks	critical
86490	SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2015:1782-1)	Nessus	SuSE Local Security Checks	medium
83163	Citrix XenServer Multiple Vulnerabilities (CTX200892)	Nessus	Misc.	medium
82260	Scientific Linux Security Update : qemu-kvm on SL7.x x86_64 (20150305)	Nessus	Scientific Linux Local Security Checks	high
81944	Mandriva Linux Security Advisory : qemu (MDVSA-2015:061)	Nessus	Mandriva Local Security Checks	high
81891	CentOS 7 : qemu-kvm (CESA-2015:0349)	Nessus	CentOS Local Security Checks	high
81803	Oracle Linux 7 : qemu-kvm (ELSA-2015-0349)	Nessus	Oracle Linux Local Security Checks	high
81661	RHEL 7 : qemu-kvm-rhev (RHSA-2015:0624)	Nessus	Red Hat Local Security Checks	high
81632	RHEL 7 : qemu-kvm (RHSA-2015:0349)	Nessus	Red Hat Local Security Checks	high
79811	GLSA-201412-01 : QEMU: Multiple Vulnerabilities	Nessus	Gentoo Local Security Checks	medium
79407	Mandriva Linux Security Advisory : qemu (MDVSA-2014:220)	Nessus	Mandriva Local Security Checks	high
79244	Ubuntu 14.04 LTS : QEMU vulnerabilities (USN-2409-1)	Nessus	Ubuntu Local Security Checks	medium
79089	Fedora 20 : qemu-1.6.2-10.fc20 (2014-14033)	Nessus	Fedora Local Security Checks	high
79073	Fedora 21 : qemu-2.1.2-6.fc21 (2014-13993)	Nessus	Fedora Local Security Checks	high
78898	Debian DSA-3067-1 : qemu-kvm - security update	Nessus	Debian Local Security Checks	high
78897	Debian DSA-3066-1 : qemu - security update	Nessus	Debian Local Security Checks	high

Detections

Analytics

CVE-2014-7815

high

Tenable Plugins

high

critical

high

critical

critical

critical

critical

critical

critical

medium

medium

high

high

high

high

high

high

medium

high

medium

high

high

high

high