There is a possible denial of service vulnerability in Action View (Rails) <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 where specially crafted accept headers can cause action view to consume 100% cpu and make the server unresponsive.

The remote Redhat Enterprise Linux 6 / 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2019:1149 advisory.

    Ruby on Rails is a model-view-controller (MVC) framework for web application development. Action Pack     implements the controller and the view components.

    Security Fix(es):

    * rubygem-actionpack: render file directory traversal in Action View (CVE-2019-5418)

    * rubygem-actionpack: denial of service vulnerability in Action View (CVE-2019-5419)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2019:1289 advisory.

    Red Hat CloudForms Management Engine delivers the insight, control, and automation needed to address the     challenges of managing virtual environments. CloudForms Management Engine is built on Ruby on Rails, a     model-view-controller (MVC) framework for web application development. Action Pack implements the     controller and the view components.

    Security Fix(es):

    * rubygem-actionpack: render file directory traversal in Action View (CVE-2019-5418)

    * rubygem-actionpack: denial of service vulnerability in Action View (CVE-2019-5419)

    For more details about the security issue(s), including the impact, a CVSS score, and other related     information, refer to the CVE page(s) listed in the References section.

    Additional Changes:

    This update fixes various bugs and adds enhancements. Documentation for these changes is available from     the Release Notes document linked to in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 6 / 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2019:1147 advisory.

    Ruby on Rails is a model-view-controller (MVC) framework for web application development. Action Pack     implements the controller and the view components.

    Security Fix(es):

    * rubygem-actionpack: render file directory traversal in Action View (CVE-2019-5418)

    * rubygem-actionpack: denial of service vulnerability in Action View (CVE-2019-5419)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for rmt-server fixes the following issues :

Update to version 2.6.5: Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Updated rails and puma dependencies for security fixes.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

Version 2.6.5

Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Version 2.6.4

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Version 2.6.3

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Version 2.6.2

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Version 2.6.1

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Version 2.6.0

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Version 2.5.20

Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

Version 2.5.19

RMT now has the ability to remove local systems with the command `rmt-cli systems remove`.

Version 2.5.18

Fixed exit code for `rmt-cli mirror` and its subcommands. Now it exits with 1 whenever an error occurs during mirroring

Improved message logging for `rtm-cli mirror`. Instead of logging an error when it occurs, the command summarize all errors at the end of execution. Now log messages have colors to better identify failure/success.

Version 2.5.17

RMT no longer provides the installer updates repository to systems via its zypper service. This repository is used during the installation process, as it provides an up-to-date installation experience, but it has no use on an already installed system.

Version 2.5.16

Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

Version 2.5.15

RMT now checks if repositories are fully mirrored during the activation process. Previously, RMT only checked if the repositories were enabled to be mirrored, but not that they were actually mirrored.
In this case, RMTs were not able to provide the repository data which systems assumed it had.

Version 2.5.14

Enable 'Installer-Updates' repositories by default

Fixed deprecation warning when thor encountered an error. Also, instead of returning 0 for thor errors, rmt-cli will return 1 instead.

Version 2.5.13

Added `rmt-cli repos clean` command to remove locally mirrored files of repositories which are not marked to be mirrored.

Previously, RMT didn't track deduplicated files in its database. Now, to accommodate `rmt-cli repos clean`, RMT will track all mirrored files.

Move the nginx reload to the configuration package which contain nginx config files, don't reload nginx unconditionally from main package.

Version 2.5.12

Update rack to version 2.2.3 (CVE-2020-8184: bsc#1173351)

Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

Version 2.5.11

rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

Version 2.5.10

Support rmt-server to run with Ruby 2.7 (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

Move nginx/vhosts.d directory to correct sub-package. They are needed together with nginx, not rmt-server.

Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

Version 2.5.9

rmt-server-pubcloud: enforce strict authentication

Version 2.5.8

Use repomd_parser gem to remove repository metadata parsing code.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

Version 2.6.5

Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Version 2.6.4

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Version 2.6.3

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Version 2.6.2

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Version 2.6.1

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Version 2.6.0

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Version 2.5.20

Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

Version 2.5.19

RMT now has the ability to remove local systems with the command `rmt-cli systems remove`.

Version 2.5.18

Fixed exit code for `rmt-cli mirror` and its subcommands. Now it exits with 1 whenever an error occurrs during mirroring

Improved message logging for `rtm-cli mirror`. Instead of logging an error when it occurs, the command summarize all errors at the end of execution. Now log messages have colors to better identify failure/success.

Version 2.5.17

RMT no longer provides the installer updates repository to systems via its zypper service. This repository is used during the installation process, as it provides an up-to-date installation experience, but it has no use on an already installed system.

Version 2.5.16

Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

Version 2.5.15

RMT now checks if repositories are fully mirrored during the activation process. Previously, RMT only checked if the repositories were enabled to be mirrored, but not that they were actually mirrored.
In this case, RMTs were not able to provide the repository data which systems assumed it had.

Version 2.5.14

Enable 'Installer-Updates' repositories by default

Fixed deprecation warning when thor encountered an error. Also, instead of returning 0 for thor errors, rmt-cli will return 1 instead.

Version 2.5.13

Added `rmt-cli repos clean` command to remove locally mirrored files of repositories which are not marked to be mirrored.

Previously, RMT didn't track deduplicated files in its database. Now, to accommodate `rmt-cli repos clean`, RMT will track all mirrored files.

Move the nginx reload to the configuration package which contain nginx config files, don't reload nginx unconditionally from main package.

Version 2.5.12

Update rack to version 2.2.3 (CVE-2020-8184: bsc#1173351)

Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

Version 2.5.11

rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

Version 2.5.10

Support rmt-server to run with Ruby 2.7 (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

Move nginx/vhosts.d directory to correct sub-package. They are needed together with nginx, not rmt-server.

Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

Version 2.5.9

rmt-server-pubcloud: enforce strict authentication

Version 2.5.8

Use repomd_parser gem to remove repository metadata parsing code.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

  - Version 2.6.5

  - Solved potential bug of SCC repository URLs changing     over time. RMT now self heals by removing the previous     invalid repository and creating the correct one.

  - Version 2.6.4

  - Add web server settings to /etc/rmt.conf: Now it's     possible to configure the minimum and maximum threads     count as well the number of web server workers to be     booted through /etc/rmt.conf.

  - Version 2.6.3

  - Instead of using an MD5 of URLs for custom repository     friendly_ids, RMT now builds an ID from the name.

  - Version 2.6.2

  - Fix RMT file caching based on timestamps: Previously,     RMT sent GET requests with the header     'If-Modified-Since' to a repository server and if the     response had a 304 (Not Modified), it would copy a file     from the local cache instead of downloading. However, if     the local file timestamp accidentally changed to a date     newer than the one on the repository server, RMT would     have an outdated file, which caused some errors. Now,     RMT makes HEAD requests to the repositories servers and     inspect the 'Last-Modified' header to decide whether to     download a file or copy it from cache, by comparing the     equalness of timestamps.



  - Version 2.6.1

  - Fixed an issue where relative paths supplied to `rmt-cli     import repos` caused the command to fail.

  - Version 2.6.0

  - Friendlier IDs for custom repositories: In an effort to     simplify the handling of SCC and custom repositories,     RMT now has friendly IDs. For SCC repositories, it's the     same SCC ID as before. For custom repositories, it can     either be user provided or RMT generated (MD5 of the     provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

  - Version 2.5.20

  - Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

  - Version 2.5.19

  - RMT now has the ability to remove local systems with the     command `rmt-cli systems remove`.

  - Version 2.5.18

  - Fixed exit code for `rmt-cli mirror` and its     subcommands. Now it exits with 1 whenever an error     occurs during mirroring

  - Improved message logging for `rtm-cli mirror`. Instead     of logging an error when it occurs, the command     summarize all errors at the end of execution. Now log     messages have colors to better identify failure/success.

  - Version 2.5.17

  - RMT no longer provides the installer updates repository     to systems via its zypper service. This repository is     used during the installation process, as it provides an     up-to-date installation experience, but it has no use on     an already installed system.

  - Version 2.5.16

  - Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

  - Version 2.5.15

  - RMT now checks if repositories are fully mirrored during     the activation process. Previously, RMT only checked if     the repositories were enabled to be mirrored, but not     that they were actually mirrored. In this case, RMTs     were not able to provide the repository data which     systems assumed it had.

  - Version 2.5.14

  - Enable 'Installer-Updates' repositories by default

  - Fixed deprecation warning when thor encountered an     error. Also, instead of returning 0 for thor errors,     rmt-cli will return 1 instead.

  - Version 2.5.13

  - Added `rmt-cli repos clean` command to remove locally     mirrored files of repositories which are not marked to     be mirrored.

  - Previously, RMT didn't track deduplicated files in its     database. Now, to accommodate `rmt-cli repos clean`, RMT     will track all mirrored files.

  - Move the nginx reload to the configuration package which     contain nginx config files, don't reload nginx     unconditionally from main package.

  - Version 2.5.12

  - Update rack to version 2.2.3 (CVE-2020-8184:
    bsc#1173351)

  - Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

  - Version 2.5.11

  - rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

  - Version 2.5.10

  - Support rmt-server to run with Ruby 2.7     (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

  - Move nginx/vhosts.d directory to correct sub-package.
    They are needed together with nginx, not rmt-server.

  - Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

  - Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

  - Version 2.5.9

  - rmt-server-pubcloud: enforce strict authentication

  - Version 2.5.8

  - Use repomd_parser gem to remove repository metadata     parsing code.

This update was imported from the SUSE:SLE-15-SP1:Update update project.

This update for rmt-server fixes the following issues :

Update to version 2.6.5 :

  - Solved potential bug of SCC repository URLs changing     over time. RMT now self heals by removing the previous     invalid repository and creating the correct one.

  - Add web server settings to /etc/rmt.conf: Now it's     possible to configure the minimum and maximum threads     count as well the number of web server workers to be     booted through /etc/rmt.conf.

  - Instead of using an MD5 of URLs for custom repository     friendly_ids, RMT now builds an ID from the name.

  - Fix RMT file caching based on timestamps: Previously,     RMT sent GET requests with the header     'If-Modified-Since' to a repository server and if the     response had a 304 (Not Modified), it would copy a file     from the local cache instead of downloading. However, if     the local file timestamp accidentally changed to a date     newer than the one on the repository server, RMT would     have an outdated file, which caused some errors. Now,     RMT makes HEAD requests to the repositories servers and     inspect the 'Last-Modified' header to decide whether to     download a file or copy it from cache, by comparing the     equalness of timestamps.

  - Fixed an issue where relative paths supplied to `rmt-cli     import repos` caused the command to fail.

  - Friendlier IDs for custom repositories: In an effort to     simplify the handling of SCC and custom repositories,     RMT now has friendly IDs. For SCC repositories, it's the     same SCC ID as before. For custom repositories, it can     either be user provided or RMT generated (MD5 of the     provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

  - Updated rails and puma dependencies for security fixes.

This update was imported from the SUSE:SLE-15-SP2:Update update project.

This update for rmt-server to version 2.3.1 fixes the following issues :

  - Fix mirroring logic when errors are encountered     (bsc#1140492)

  - Refactor RMT::Mirror to download metadata/licenses in     parallel

  - Check repo metadata GPG signatures during mirroring     (bsc#1132690)

  - Add rmt-server-config subpackage with nginx configs     (fate#327816, bsc#1136081)

  - Fix dependency to removed boot_cli_i18n file     (bsc#1136020) 

  - Add `rmt-cli systems list` command to list registered     systems

  - Fix create UUID when system_uuid file empty     (bsc#1138316)

  - Fix duplicate nginx location in rmt-server-pubcloud     (bsc#1135222)

  - Mirror additional repos that were enabled during     mirroring (bsc#1132690)

  - Make service IDs consistent across different RMT     instances (bsc#1134428)

  - Make SMT data import scripts faster (bsc#1134190)

  - Fix incorrect triggering of registration sharing     (bsc#1129392)

  - Fix license mirroring issue in some non-SUSE     repositories (bsc#1128858)

  - Update dependencies to fix vulnerabilities in rails     (CVE-2019-5419, bsc#1129271) and nokogiri     (CVE-2019-11068, bsc#1132160)

  - Allow RMT registration to work under HTTP as well as     HTTPS.

  - Offline migration from SLE 15 to SLE 15 SP1 will add     Python2 module 

  - Online migrations will automatically add additional     modules to the client systems depending on the base     product

  - Supply log severity to journald

  - Breaking Change: Added headers to generated CSV files

This update was imported from the SUSE:SLE-15-SP1:Update update project.

This update for rmt-server to version 2.3.1 fixes the following issues :

Fix mirroring logic when errors are encountered (bsc#1140492)

Refactor RMT::Mirror to download metadata/licenses in parallel

Check repo metadata GPG signatures during mirroring (bsc#1132690)

Add rmt-server-config subpackage with nginx configs (fate#327816, bsc#1136081)

Fix dependency to removed boot_cli_i18n file (bsc#1136020)

Add `rmt-cli systems list` command to list registered systems

Fix create UUID when system_uuid file empty (bsc#1138316)

Fix duplicate nginx location in rmt-server-pubcloud (bsc#1135222)

Mirror additional repos that were enabled during mirroring (bsc#1132690)

Make service IDs consistent across different RMT instances (bsc#1134428)

Make SMT data import scripts faster (bsc#1134190)

Fix incorrect triggering of registration sharing (bsc#1129392)

Fix license mirroring issue in some non-SUSE repositories (bsc#1128858)

Update dependencies to fix vulnerabilities in rails (CVE-2019-5419, bsc#1129271) and nokogiri (CVE-2019-11068, bsc#1132160)

Allow RMT registration to work under HTTP as well as HTTPS.

Offline migration from SLE 15 to SLE 15 SP1 will add Python2 module

Online migrations will automatically add additional modules to the client systems depending on the base product

Supply log severity to journald

Breaking Change: Added headers to generated CSV files

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Redhat Enterprise Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2019:0796 advisory.

    Red Hat CloudForms Management Engine delivers the insight, control, and automation needed to address the     challenges of managing virtual environments. CloudForms Management Engine is built on Ruby on Rails, a     model-view-controller (MVC) framework for web application development. Action Pack implements the     controller and the view components.

    Security Fix(es):

    * rubygem-actionpack: render file directory traversal in Action View (CVE-2019-5418)

    * rubygem-actionpack: denial of service vulnerability in Action View (CVE-2019-5419)

    For more details about the security issue(s), including the impact, a CVSS score, and other related     information, refer to the CVE page(s) listed in the References section.

    Additional Changes:

    This update fixes various bugs and adds enhancements. Documentation for these changes is available from     the Release Notes document linked to in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for rmt-server to version 2.1.4 fixes the following issues :

  - Fix duplicate nginx location in rmt-server-pubcloud     (bsc#1135222)

  - Mirror additional repos that were enabled during     mirroring (bsc#1132690)

  - Make service IDs consistent across different RMT     instances (bsc#1134428)

  - Make SMT data import scripts faster (bsc#1134190)

  - Fix incorrect triggering of registration sharing     (bsc#1129392)

  - Fix license mirroring issue in some non-SUSE     repositories (bsc#1128858)

  - Set CURLOPT_LOW_SPEED_LIMIT to prevent downloads from     getting stuck (bsc#1107806)

  - Truncate the RMT lockfile when writing a new PID     (bsc#1125770)

  - Fix missing trailing slashes on custom repository import     from SMT (bsc#1118745)

  - Zypper authentication plugin (fate#326629)

  - Instance verification plugin in rmt-server-pubcloud     (fate#326629)

  - Update dependencies to fix vulnerabilities in rails     (CVE-2019-5419, bsc#1129271) and nokogiri     (CVE-2019-11068, bsc#1132160)

  - Allow RMT registration to work under HTTP as well as     HTTPS.

  - Offline migration from SLE 15 to SLE 15 SP1 will add     Python2 module 

  - Online migrations will automatically add additional     modules to the client systems depending on the base     product

  - Supply log severity to journald

  - Breaking Change: Added headers to generated CSV files

This update was imported from the SUSE:SLE-15:Update update project.

This update for rmt-server to version 2.1.4 fixes the following issues :

Fix duplicate nginx location in rmt-server-pubcloud (bsc#1135222)

Mirror additional repos that were enabled during mirroring (bsc#1132690)

Make service IDs consistent across different RMT instances (bsc#1134428)

Make SMT data import scripts faster (bsc#1134190)

Fix incorrect triggering of registration sharing (bsc#1129392)

Fix license mirroring issue in some non-SUSE repositories (bsc#1128858)

Set CURLOPT_LOW_SPEED_LIMIT to prevent downloads from getting stuck (bsc#1107806)

Truncate the RMT lockfile when writing a new PID (bsc#1125770)

Fix missing trailing slashes on custom repository import from SMT (bsc#1118745)

Zypper authentication plugin (fate#326629)

Instance verification plugin in rmt-server-pubcloud (fate#326629)

Update dependencies to fix vulnerabilities in rails (CVE-2019-5419, bsc#1129271) and nokogiri (CVE-2019-11068, bsc#1132160)

Allow RMT registration to work under HTTP as well as HTTPS.

Offline migration from SLE 15 to SLE 15 SP1 will add Python2 module

Online migrations will automatically add additional modules to the client systems depending on the base product

Supply log severity to journald

Breaking Change: Added headers to generated CSV files

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Update Ruby on Rails to 5.2.3. Fixes CVE-2019-5418 CVE-2019-5419 CVE-2019-5420.

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.
Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rubygem-actionpack-5_1 fixes the following issues :

Security issues fixed :

  - CVE-2019-5418: Fixed a file content disclosure     vulnerability in Action View which could be exploited     via specially crafted accept headers in combination with     calls to render file (bsc#1129272).

  - CVE-2019-5419: Fixed a resource exhaustion issue in     Action View which could make the server unable to     process requests (bsc#1129271).

This update was imported from the SUSE:SLE-15:Update update project.

John Hawthorn of Github discovered a file content disclosure vulnerability in Rails, a ruby based web application framework.
Specially crafted accept headers in combination with calls to `render file:` can cause arbitrary files on the target server to be rendered, disclosing the file contents.

This vulnerability could also be exploited for a denial of service attack.

For Debian 8 'Jessie', these problems have been fixed in version 2:4.1.8-1+deb8u5.

We recommend that you upgrade your rails packages.

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Ruby on Rails blog :

Rails 4.2.11.1, 5.0.7.2, 5.1.6.2, 5.2.2.1, and 6.0.0.beta3 have been released! These contain the following important security fixes. It is recommended that users upgrade as soon as possible :

CVE-2019-5418 File Content Disclosure in Action View

CVE-2019-5419 Denial of Service Vulnerability in Action View

ID	Name	Product	Family	Severity
210457	RHEL 6 / 7 : rh-ror42-rubygem-actionpack (RHSA-2019:1149)	Nessus	Red Hat Local Security Checks	high
194099	RHEL 7 : CloudForms 4.6.9 (RHSA-2019:1289)	Nessus	Red Hat Local Security Checks	high
194046	RHEL 6 / 7 : rh-ror50-rubygem-actionpack (RHSA-2019:1147)	Nessus	Red Hat Local Security Checks	high
143751	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3036-1)	Nessus	SuSE Local Security Checks	critical
143623	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3160-1)	Nessus	SuSE Local Security Checks	critical
143622	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3147-1)	Nessus	SuSE Local Security Checks	critical
143225	openSUSE Security Update : rmt-server (openSUSE-2020-2000)	Nessus	SuSE Local Security Checks	critical
143190	openSUSE Security Update : rmt-server (openSUSE-2020-1993)	Nessus	SuSE Local Security Checks	critical
127737	openSUSE Security Update : rmt-server (openSUSE-2019-1824)	Nessus	SuSE Local Security Checks	critical
127091	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2019:1973-1)	Nessus	SuSE Local Security Checks	critical
127087	RHEL 7 : CloudForms 4.7.3 (RHSA-2019:0796)	Nessus	Red Hat Local Security Checks	high
125794	openSUSE Security Update : rmt-server (openSUSE-2019-1527)	Nessus	SuSE Local Security Checks	critical
125620	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2019:1381-1)	Nessus	SuSE Local Security Checks	critical
124724	Fedora 30 : 1:rubygem-actionmailer / 1:rubygem-actionpack / etc (2019-1cfe24db5c)	Nessus	Fedora Local Security Checks	critical
124709	openSUSE Security Update : rubygem-actionpack-5_1 (openSUSE-2019-1344)	Nessus	SuSE Local Security Checks	high
123526	Debian DLA-1739-1 : rails security update	Nessus	Debian Local Security Checks	high
122936	FreeBSD : Rails -- Action View vulnerabilities (1396a74a-4997-11e9-b5f1-83edb3f89ba1)	Nessus	FreeBSD Local Security Checks	high

Detections

Analytics

CVE-2019-5419

high

Tenable Plugins

high

high

high

critical

critical

critical

critical

critical

critical

critical

high

critical

critical

critical

high

high

high