rom_copy() in hw/core/loader.c in QEMU 4.0 and 4.1.0 does not validate the relationship between two addresses, which allows attackers to trigger an invalid memory copy operation.

The remote Ubuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 20.04 LTS / 22.04 LTS / 24.04 LTS / 24.10 host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-7094-1 advisory.

    It was discovered that QEMU incorrectly handled memory during certain VNC operations. A remote attacker     could possibly use this issue to cause QEMU to consume resources, resulting in a denial of service. This     issue only affected Ubuntu 14.04 LTS. (CVE-2019-20382)

    It was discovered that QEMU incorrectly handled certain memory copy operations when loading ROM contents.
    If a user were tricked into running an untrusted kernel image, a remote attacker could possibly use this     issue to run arbitrary code. This issue only affected Ubuntu 14.04 LTS. (CVE-2020-13765)

    Aviv Sasson discovered that QEMU incorrectly handled Slirp networking. A remote attacker could use this     issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code. This     issue only affected Ubuntu 14.04 LTS. (CVE-2020-1983)

    It was discovered that the SLiRP networking implementation of the QEMU emulator did not properly manage     memory under certain circumstances. An attacker could use this to cause a heap-based buffer overflow or     other out- of-bounds access, which can lead to a denial of service (application crash) or potential     execute arbitrary code. This issue only affected Ubuntu 14.04 LTS. (CVE-2020-7039)

    It was discovered that the SLiRP networking implementation of the QEMU emulator misuses snprintf return     values. An attacker could use this to cause a denial of service (application crash) or potentially execute     arbitrary code. This issue only affected Ubuntu 14.04 LTS. (CVE-2020-8608)

    It was discovered that QEMU SLiRP networking incorrectly handled certain udp packets. An attacker inside a     guest could possibly use this issue to leak sensitive information from the host. This issue only affected     Ubuntu 14.04 LTS and Ubuntu 16.04 LTS. (CVE-2021-3592, CVE-2021-3594)

    It was discovered that QEMU had a DMA reentrancy issue, leading to a use-after-free vulnerability. An     attacker could possibly use this issue to cause a denial of service. This issue only affected Ubuntu 18.04     LTS, Ubuntu 20.04 LTS and Ubuntu 22.04 LTS. (CVE-2023-3019)

    It was discovered that QEMU had a flaw in Virtio PCI Bindings, leading to a triggerable crash via     vhost_net_stop. An attacker inside a guest could possibly use this issue to cause a denial of service.
    This issue only affected Ubuntu 24.04 LTS and Ubuntu 24.10. (CVE-2024-4693)

    It was discovered that QEMU incorrectly handled memory in virtio-sound, leading to a heap-based buffer     overflow. An attacker could possibly use this issue to cause a denial of service or execute arbitrary     code. This issue only affected Ubuntu 24.04 LTS and Ubuntu 24.10. (CVE-2024-7730)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 7 host has one or more packages installed that are affected by multiple vulnerabilities that have been acknowledged by the vendor but will not be patched.

  - QEMU: net: ignore packets with large size (CVE-2018-17963)

  - Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0     allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.
    (CVE-2015-5745)

  - The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged     users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure     to define the .write method. (CVE-2015-7549)

Note that Nessus has not tested for these issues but has instead relied on the package manager's report that the package is installed.

The remote Redhat Enterprise Linux 6 host has one or more packages installed that are affected by multiple vulnerabilities that have been acknowledged by the vendor but will not be patched.

  - QEMU: net: ignore packets with large size (CVE-2018-17963)

  - Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0     allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.
    (CVE-2015-5745)

  - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a     denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD)     list. (CVE-2015-8558)

Note that Nessus has not tested for these issues but has instead relied on the package manager's report that the package is installed.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The imx_fec_do_tx function in hw/net/imx_fec.c in QEMU     (aka Quick Emulator) does not properly limit the buffer     descriptor count when transmitting packets, which     allows local guest OS administrators to cause a denial     of service (infinite loop and QEMU process crash) via     vectors involving a buffer descriptor with a length of     0 and crafted values in bd.flags.(CVE-2016-7907)

  - Stack-based buffer overflow in hw/usb/redirect.c in     QEMU (aka Quick Emulator) allows local guest OS users     to cause a denial of service (QEMU process crash) via     vectors related to logging debug     messages.(CVE-2017-10806)

  - The dhcp_decode function in slirp/bootp.c in QEMU (aka     Quick Emulator) allows local guest OS users to cause a     denial of service (out-of-bounds read and QEMU process     crash) via a crafted DHCP options     string.(CVE-2017-11434)

  - A use-after-free issue was found in the Slirp     networking implementation of the Quick emulator (QEMU).
    It occurs when a Socket referenced from multiple     packets is freed while responding to a message. A     user/process could use this flaw to crash the QEMU     process on the host resulting in denial of     service.(CVE-2017-13711)

  - Buffer overflow in the 'megasas_mmio_write' function in     Qemu 2.9.0 allows remote attackers to have unspecified     impact via unknown vectors.(CVE-2017-8380)

  - A heap buffer overflow issue was found in the way SLiRP     networking back-end in QEMU processes fragmented     packets. It could occur while reassembling the     fragmented datagrams of an incoming packet. A     privileged user/process inside guest could use this     flaw to crash the QEMU process resulting in DoS or     potentially leverage it to execute arbitrary code on     the host with privileges of the QEMU     process.(CVE-2018-11806)

  - qemu-seccomp.c in QEMU might allow local OS guest users     to cause a denial of service (guest crash) by     leveraging mishandling of the seccomp policy for     threads other than the main thread.(CVE-2018-15746)

  - An integer overflow issue was found in the RTL8139 NIC     emulation in QEMU. It could occur while receiving     packets over the network if the size value is greater     than INT_MAX. Such overflow would lead to stack buffer     overflow issue. A user inside guest could use this flaw     to crash the QEMU process, resulting in DoS     scenario.(CVE-2018-17958)

  - An integer overflow issue was found in the AMD PC-Net     II NIC emulation in QEMU. It could occur while     receiving packets, if the size value was greater than     INT_MAX. Such overflow would lead to stack buffer     overflow issue. A user inside guest could use this flaw     to crash the QEMU process resulting in     DoS.(CVE-2018-17962)

  - A heap buffer overflow issue was found in the     load_device_tree() function of QEMU, which is invoked     to load a device tree blob at boot time. It occurs due     to device tree size manipulation before buffer     allocation, which could overflow a signed int type. A     user/process could use this flaw to potentially execute     arbitrary code on a host system with privileges of the     QEMU process.(CVE-2018-20815)

  - interface_release_resource in hw/display/qxl.c in QEMU     3.1.x through 4.0.0 has a NULL pointer     dereference.(CVE-2019-12155)

  - qemu-bridge-helper.c in QEMU 3.1 and 4.0.0 does not     ensure that a network interface name (obtained from     bridge.conf or a --br=bridge option) is limited to the     IFNAMSIZ size, which can lead to an ACL     bypass.(CVE-2019-13164)

  - A heap buffer overflow issue was found in the SLiRP     networking implementation of the QEMU emulator. This     flaw occurs in the ip_reass() routine while     reassembling incoming packets if the first fragment is     bigger than the m->m_dat[] buffer. An attacker could     use this flaw to crash the QEMU process on the host,     resulting in a Denial of Service or potentially     executing arbitrary code with privileges of the QEMU     process.(CVE-2019-14378)

  - tcp_emu in slirp/tcp_subr.c (aka slirp/src/tcp_subr.c)     in QEMU 3.0.0 uses uninitialized data in an snprintf     call, leading to Information disclosure.(CVE-2019-9824)

  - An out-of-bounds read vulnerability was found in the     SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine     while replying to an ICMP echo request, also known as     ping. This flaw allows a malicious guest to leak the     contents of the host memory, resulting in possible     information disclosure.(CVE-2020-10756)

  - A heap buffer overflow issue was found in the SLiRP     networking implementation of the QEMU emulator. This     flaw occurs in the tcp_emu() routine while emulating     IRC and other protocols. An attacker could use this     flaw to crash the QEMU process on the host, resulting     in a denial of service or potential execution of     arbitrary code with privileges of the QEMU     process.(CVE-2020-7039)

  - An out-of-bound write access flaw was found in the way     QEMU loads ROM contents at boot time. This flaw occurs     in the rom_copy() routine while loading the contents of     a 32-bit -kernel image into memory. Running an     untrusted -kernel image may load contents at arbitrary     memory locations, potentially leading to code execution     with the privileges of the QEMU     process.(CVE-2020-13765)

  - A use-after-free flaw was found in the USB(xHCI/eHCI)     controller emulators of QEMU. This flaw occurs while     setting up the USB packet as a usb_packet_map() routine     and returns an error that was not checked. This flaw     allows a guest user or process to crash the QEMU     process, resulting in a denial of     service.(CVE-2020-25084)

  - An infinite loop flaw was found in the USB OHCI     controller emulator of QEMU. This flaw occurs while     servicing OHCI isochronous transfer descriptors (TD) in     the ohci_service_iso_td routine, as it retires a TD if     it has passed its time frame. It does not check if the     TD was already processed and holds an error code in     TD_CC. This issue may happen if the TD list has a loop.
    This flaw allows a guest user or process to consume CPU     cycles on the host, resulting in a denial of     service.(CVE-2020-25625)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - A potential directory traversal issue was found in the     tftp server of the SLiRP user-mode networking     implementation used by QEMU. It could occur on a     Windows host, as it allows the use of both forward     ('/') and backward slash('\') tokens as separators in a     file path. A user able to access the tftp server could     use this flaw to access undue files by using relative     paths.(CVE-2020-7211)

  - An out-of-bounds read/write access flaw was found in     the USB emulator of the QEMU in versions before 5.2.0.
    This issue occurs while processing USB packets from a     guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out     routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the     potential execution of arbitrary code with the     privileges of the QEMU process on the     host.(CVE-2020-14364)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2021:14704-1 advisory.

  - The vmware-vga driver (hw/display/vmware_vga.c) in QEMU allows local guest users to write to qemu memory     locations and gain privileges via unspecified parameters related to rectangle handling. (CVE-2014-3689)

  - The VNC websocket frame decoder in QEMU allows remote attackers to cause a denial of service (memory and     CPU consumption) via a large (1) websocket payload or (2) HTTP headers section. (CVE-2015-1779)

  - In QEMU through 5.0.0, an integer overflow was found in the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial of service. (CVE-2020-12829)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an out-of-bounds access during an es1370_write() operation.
    (CVE-2020-13361)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS user. (CVE-2020-13362)

  - rom_copy() in hw/core/loader.c in QEMU 4.0 and 4.1.0 does not validate the relationship between two     addresses, which allows attackers to trigger an invalid memory copy operation. (CVE-2020-13765)

  - An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before     5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the     privileges of the QEMU process on the host. (CVE-2020-14364)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Drop the 'ampersand 0x25 shift altgr' line in pt-br keymap file (bsc#1129962)

Fix migration failure with error message: 'error while loading state section id 3(ram) (bsc#1154790)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb iehci packet handling (CVE-2020-25084, bsc#1176673)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Make note that this patch previously included addresses (CVE-2020-13765 bsc#1172478)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix vfio-pci device on s390 enters error state (bsc#1179725)

Fix PCI devices are unavailable after a subsystem reset. (bsc#1179726)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The version of qemu-kvm installed on the remote host is prior to 1.5.3-156.26. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS-2021-1488 advisory.

    An out-of-bound write access flaw was found in the way QEMU loads ROM contents at boot time. This flaw     occurs in the rom_copy() routine while loading the contents of a 32-bit -kernel image into memory. Running     an untrusted -kernel image may load contents at arbitrary memory locations, potentially leading to code     execution with the privileges of the QEMU process. (CVE-2020-13765)

    An assertion failure flaw was found in QEMU in the network packet processing component. This issue affects     the e1000e and vmxnet3 network devices. This flaw allows a malicious guest user or process to abort     the QEMU process on the host, resulting in a denial of service. (CVE-2020-16092)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of qemu installed on the remote host is prior to 3.1.0-8. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2021-1617 advisory.

    An out-of-bound write access flaw was found in the way QEMU loads ROM contents at boot time. This flaw     occurs in the rom_copy() routine while loading the contents of a 32-bit -kernel image into memory. Running     an untrusted -kernel image may load contents at arbitrary memory locations, potentially leading to code     execution with the privileges of the QEMU process. (CVE-2020-13765)

    An assertion failure flaw was found in QEMU in the network packet processing component. This issue affects     the e1000e and vmxnet3 network devices. This flaw allows a malicious guest user or process to abort     the QEMU process on the host, resulting in a denial of service. (CVE-2020-16092)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - In QEMU through 5.0.0, an integer overflow was found in     the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write     operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to     crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial     of service.(CVE-2020-12829)

  - slirp.c in libslirp through 4.3.1 has a buffer     over-read because it tries to read a certain amount of     header data even if that exceeds the total packet     length.(CVE-2020-29130)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read     because it tries to read a certain amount of header     data even if that exceeds the total packet     length.(CVE-2020-29129)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop     via an RX descriptor with a NULL buffer     address.(CVE-2020-28916)

  - ati_2d_blt in hw/display/ati_2d.c in QEMU 4.2.1 can     encounter an outside-limits situation in a calculation.
    A guest can crash the QEMU process.(CVE-2020-27616)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows     guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a     valid Layer 3 protocol.(CVE-2020-27617)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c     misuses snprintf return values, leading to a buffer     overflow in later code.(CVE-2020-8608)

  - tcp_emu in tcp_subr.c in libslirp 4.1.0, as used in     QEMU 4.2.0, mismanages memory, as demonstrated by IRC     DCC commands in EMU_IRC. This can cause a heap-based     buffer overflow or other out-of-bounds access which can     lead to a DoS or potential execute arbitrary     code.(CVE-2020-7039)

  - ip_reass in ip_input.c in libslirp 4.0.0 has a     heap-based buffer overflow via a large packet because     it mishandles a case involving the first     fragment.(CVE-2019-14378)

  - A flaw was found in the memory management API of QEMU     during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access     to the MSI-X table while performing MMIO operations. A     guest user may abuse this flaw to crash the QEMU     process on the host, resulting in a denial of service.
    This flaw affects QEMU versions prior to     5.2.0.(CVE-2020-27821)

  - QEMU: reachable assertion failure in     net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c     (CVE-2020-16092)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to     trigger an out-of-bounds access by providing an address     near the end of the PCI configuration     space(CVE-2020-13791)

  - qmp_guest_file_read in qga/commands-posix.c and     qga/commands-win32.c in qemu-ga (aka QEMU Guest Agent)     in QEMU 2.12.50 has an integer overflow causing a     g_malloc0() call to trigger a segmentation fault when     trying to allocate a large memory chunk. The     vulnerability can be exploited by sending a crafted QMP     command (including guest-file-read with a large count     value) to the agent via the listening     socket.(CVE-2018-12617)

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an     unvalidated address, which leads to an out-of-bounds     read during sdhci_write() operations. A guest OS user     can crash the QEMU process.(CVE-2020-13253)

  - QEMU 4.1.0 has a memory leak in zrle_compress_data in     ui/vnc-enc-zrle.c during a VNC disconnect operation     because libz is misused, resulting in a situation where     memory allocated in deflateInit2 is not freed in     deflateEnd.(CVE-2019-20382)

  - An integer overflow was found in QEMU 4.0.1 through     4.2.0 in the way it implemented ATI VGA emulation. This     flaw occurs in the ati_2d_blt() routine in     hw/display/ati-2d.c while handling MMIO write     operations through the ati_mm_write() callback. A     malicious guest could abuse this flaw to crash the QEMU     process, resulting in a denial of     service.(CVE-2020-11869)

  - This vulnerability has been modified since it was last     analyzed by the NVD. It is awaiting reanalysis which     may result in further changes to the information     provided.(CVE-2020-13659)

  - A flaw was found in QEMU in the implementation of the     Pointer Authentication (PAuth) support for ARM     introduced in version 4.0 and fixed in version 5.0.0. A     general failure of the signature generation process     caused every PAuth-enforced pointer to be signed with     the same signature. A local attacker could obtain the     signature of a protected pointer and abuse this flaw to     bypass PAuth protection for all programs running on     QEMU.(CVE-2020-10702)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - ** DISPUTED ** An issue was discovered in ide_dma_cb()     in hw/ide/core.c in QEMU 2.4.0 through 4.2.0. The guest     system can crash the QEMU process in the host system     via a special SCSI_IOCTL_SEND_COMMAND. It hits an     assertion that implies that the size of successful DMA     transfers there must be a multiple of 512 (the size of     a sector). NOTE: a member of the QEMU security team     disputes the significance of this issue because a     'privileged guest user has many ways to cause similar     DoS effect, without triggering this     assert.'(CVE-2019-20175)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

  - libslirp 4.0.0, as used in QEMU 4.1.0, has a     use-after-free in ip_reass in     ip_input.c.(CVE-2019-15890)

  - A use after free vulnerability in ip_reass() in     ip_input.c of libslirp 4.2.0 and prior releases allows     crafted packets to cause a denial of     service.(CVE-2020-1983)

  - ati-vga in hw/display/ati.c in QEMU 4.2.0 allows guest     OS users to trigger infinite recursion via a crafted     mm_index value during an ati_mm_read or ati_mm_write     call.(CVE-2020-13800)

  - An out-of-bounds heap buffer access flaw was found in     the way the iSCSI Block driver in QEMU versions 2.12.0     before 4.2.1 handled a response coming from an iSCSI     server while checking the status of a Logical Address     Block (LBA) in an iscsi_co_block_status() routine. A     remote user could use this flaw to crash the QEMU     process, resulting in a denial of service or potential     execution of arbitrary code with privileges of the QEMU     process on the host.(CVE-2020-1711)

  - tftp.c in libslirp 4.1.0, as used in QEMU 4.2.0, does     not prevent ..\ directory traversal on     Windows.(CVE-2020-7211)

  - An out-of-bounds read vulnerability was found in the     SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine     while replying to an ICMP echo request, also known as     ping. This flaw allows a malicious guest to leak the     contents of the host memory, resulting in possible     information disclosure. This flaw affects versions of     libslirp before 4.3.1.(CVE-2020-10756)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL     pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call.(CVE-2020-25743)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before     5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid     pointer.(CVE-2020-25742)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows     guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a     valid Layer 3 protocol.(CVE-2020-27617)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a     NULL pointer dereference related to     BounceBuffer.(CVE-2020-13659)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - In QEMU through 5.0.0, an assertion failure can occur     in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious     guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of     service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c.(CVE-2020-16092)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - The (1) v9fs_create and (2) v9fs_lcreate functions in     hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local     guest OS privileged users to cause a denial of service     (file descriptor or memory consumption) via vectors     related to an already in-use fid.(CVE-2017-7377)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

  - An out-of-bounds read/write access flaw was found in     the USB emulator of the QEMU in versions before 5.2.0.
    This issue occurs while processing USB packets from a     guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out     routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the     potential execution of arbitrary code with the     privileges of the QEMU process on the     host.(CVE-2020-14364)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:0347 advisory.

  - rom_copy() in hw/core/loader.c in QEMU 4.0 and 4.1.0 does not validate the relationship between two     addresses, which allows attackers to trigger an invalid memory copy operation. (CVE-2020-13765)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-0347 advisory.

    - Resolves: bz#1842923       (CVE-2020-13765 qemu-kvm: QEMU: loader: OOB access while loading registered ROM may lead to code     execution [rhel-7.9.z])

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:0347 advisory.

    Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of     architectures. The qemu-kvm packages provide the user-space component for running virtual machines that     use KVM.

    Security Fix(es):

    * QEMU: loader: OOB access while loading registered ROM may lead to code execution (CVE-2020-13765)

    * QEMU: reachable assertion failure in net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c     (CVE-2020-16092)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Bug Fix(es):

    * qemu-kvm FTBFS on rhel7.9 (BZ#1884997)

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities :

  - QEMU: reachable assertion failure in     net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c     (CVE-2020-16092)

  - An out-of-bounds read/write access flaw was found in     the USB emulator of the QEMU. This issue occurs while     processing USB packets from a guest when USBDevice     'setup_len' exceeds its 'data_buf[4096]' in the     do_token_in, do_token_out routines. This flaw allows a     guest user to crash the QEMU process, resulting in a     denial of service, or the potential execution of     arbitrary code with the privileges of the QEMU process     on the host.(CVE-2020-14364)

  - A use after free vulnerability in ip_reass() in     ip_input.c of libslirp 4.2.0 and prior releases allows     crafted packets to cause a denial of     service.(CVE-2020-1983)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - The (1) v9fs_create and (2) v9fs_lcreate functions in     hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local     guest OS privileged users to cause a denial of service     (file descriptor or memory consumption) via vectors     related to an already in-use fid.(CVE-2017-7377)

  - QEMU 4.1.0 has a memory leak in zrle_compress_data in     ui/vnc-enc-zrle.c during a VNC disconnect operation     because libz is misused, resulting in a situation where     memory allocated in deflateInit2 is not freed in     deflateEnd.(CVE-2019-20382)

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an     unvalidated address, which leads to an out-of-bounds     read during sdhci_write() operations. A guest OS user     can crash the QEMU process.(CVE-2020-13253)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a     NULL pointer dereference related to     BounceBuffer.(CVE-2020-13659)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to     trigger an out-of-bounds access by providing an address     near the end of the PCI configuration     space.(CVE-2020-13791)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4467-1 advisory.

    Ziming Zhang and VictorV discovered that the QEMU SLiRP networking implementation incorrectly handled     replying to certain ICMP echo requests. An attacker inside a guest could possibly use this issue to leak     host memory to obtain sensitive information. This issue only affected Ubuntu 18.04 LTS. (CVE-2020-10756)

    Eric Blake and Xueqiang Wei discovered that the QEMU NDB implementation incorrectly handled certain     requests. A remote attacker could possibly use this issue to cause QEMU to crash, resulting in a denial of     service. This issue only affected Ubuntu 20.04 LTS. (CVE-2020-10761)

    Ziming Zhang discovered that the QEMU SM501 graphics driver incorrectly handled certain operations. An     attacker inside a guest could use this issue to cause QEMU to crash, resulting in a denial of service, or     possibly execute arbitrary code. (CVE-2020-12829)

    It was discovered that the QEMU SD memory card implementation incorrectly handled certain memory     operations. An attacker inside a guest could possibly use this issue to cause QEMU to crash, resulting in     a denial of service. (CVE-2020-13253)

    Ren Ding and Hanqing Zhao discovered that the QEMU ES1370 audio driver incorrectly handled certain invalid     frame counts. An attacker inside a guest could possibly use this issue to cause QEMU to crash, resulting     in a denial of service. (CVE-2020-13361)

    Ren Ding and Hanqing Zhao discovered that the QEMU MegaRAID SAS SCSI driver incorrectly handled certain     memory operations. An attacker inside a guest could possibly use this issue to cause QEMU to crash,     resulting in a denial of service. (CVE-2020-13362)

    Alexander Bulekov discovered that QEMU MegaRAID SAS SCSI driver incorrectly handled certain memory space     operations. An attacker inside a guest could possibly use this issue to cause QEMU to crash, resulting in     a denial of service. (CVE-2020-13659)

    Ren Ding, Hanqing Zhao, Alexander Bulekov, and Anatoly Trosinenko discovered that the QEMU incorrectly     handled certain msi-x mmio operations. An attacker inside a guest could possibly use this issue to cause     QEMU to crash, resulting in a denial of service. (CVE-2020-13754)

    It was discovered that QEMU incorrectly handled certain memory copy operations when loading ROM contents.
    If a user were tricked into running an untrusted kernel image, a remote attacker could possibly use this     issue to run arbitrary code. This issue only affected Ubuntu 16.04 LTS and Ubuntu 18.04 LTS.
    (CVE-2020-13765)

    Ren Ding, Hanqing Zhao, and Yi Ren discovered that the QEMU ATI video driver incorrectly handled certain     index values. An attacker inside a guest could possibly use this issue to cause QEMU to crash, resulting     in a denial of service. This issue only affected Ubuntu 20.04 LTS. (CVE-2020-13800)

    Ziming Zhang discovered that the QEMU OSS audio driver incorrectly handled certain operations. An attacker     inside a guest could possibly use this issue to cause QEMU to crash, resulting in a denial of service.
    This issue only affected Ubuntu 20.04 LTS. (CVE-2020-14415)

    Ziming Zhang discovered that the QEMU XGMAC Ethernet controller incorrectly handled packet transmission.
    An attacker inside a guest could use this issue to cause QEMU to crash, resulting in a denial of service,     or possibly execute arbitrary code. (CVE-2020-15863)

    Ziming Zhang discovered that the QEMU e1000e Ethernet controller incorrectly handled packet processing. An     attacker inside a guest could possibly use this issue to cause QEMU to crash, resulting in a denial of     service. This issue only affected Ubuntu 18.04 LTS and Ubuntu 20.04 LTS. (CVE-2020-16092)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The following CVE(s) were reported against src:qemu :

CVE-2017-9503

QEMU (aka Quick Emulator), when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving megasas command processing.

CVE-2019-12068

In QEMU 1:4.1-1 (1:2.8+dfsg-6+deb9u8), when executing script in lsi_execute_script(), the LSI scsi adapter emulator advances 's->dsp' index to read next opcode. This can lead to an infinite loop if the next opcode is empty. Move the existing loop exit after 10k iterations so that it covers no-op opcodes as well.

CVE-2019-20382

QEMU 4.1.0 has a memory leak in zrle_compress_data in ui/vnc-enc-zrle.c during a VNC disconnect operation because libz is misused, resulting in a situation where memory allocated in deflateInit2 is not freed in deflateEnd.

CVE-2020-1983

A use after free vulnerability in ip_reass() in ip_input.c of libslirp 4.2.0 and prior releases allows crafted packets to cause a denial of service.

CVE-2020-8608

In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c misuses snprintf return values, leading to a buffer overflow in later code.

CVE-2020-10756

An out-of-bounds read vulnerability was found in the SLiRP networking implementation of the QEMU emulator. This flaw occurs in the icmp6_send_echoreply() routine while replying to an ICMP echo request, also known as ping. This flaw allows a malicious guest to leak the contents of the host memory, resulting in possible information disclosure. This flaw affects versions of libslirp before 4.3.1.

CVE-2020-13361

In QEMU 5.0.0 and earlier, es1370_transfer_audio in hw/audio/es1370.c does not properly validate the frame count, which allows guest OS users to trigger an out-of-bounds access during an es1370_write() operation.

CVE-2020-13362

In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a crafted reply_queue_head field from a guest OS user.

CVE-2020-13659

address_space_map in exec.c in QEMU 4.2.0 can trigger a NULL pointer dereference related to BounceBuffer.

CVE-2020-13754

hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address in an msi-x mmio operation.

CVE-2020-13765

rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not validate the relationship between two addresses, which allows attackers to trigger an invalid memory copy operation.

CVE-2020-15863

Stack-based overflow in xgmac_enet_send() in hw/net/xgmac.c.

For Debian 9 stretch, these problems have been fixed in version 1:2.8+dfsg-6+deb9u10.

We recommend that you upgrade your qemu packages.

For the detailed security status of qemu please refer to its security tracker page at: https://security-tracker.debian.org/tracker/qemu

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several vulnerabilities were fixed in qemu, a fast processor emulator.

CVE-2020-1983

slirp: Fix use-after-free in ip_reass().

CVE-2020-13361

es1370_transfer_audio in hw/audio/es1370.c allowed guest OS users to trigger an out-of-bounds access during an es1370_write() operation.

CVE-2020-13362

megasas_lookup_frame in hw/scsi/megasas.c had an out-of-bounds read via a crafted reply_queue_head field from a guest OS user.

CVE-2020-13765

hw/core/loader: Fix possible crash in rom_copy().

For Debian 8 'Jessie', these problems have been fixed in version 1:2.1+dfsg-12+deb8u15.

We recommend that you upgrade your qemu packages.

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
210736	Ubuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 20.04 LTS / 22.04 LTS / 24.04 LTS / 24.10 : QEMU vulnerabilities (USN-7094-1)	Nessus	Ubuntu Local Security Checks	medium
198727	RHEL 7 : qemu-kvm (Unpatched Vulnerability)	Nessus	Red Hat Local Security Checks	critical
198718	RHEL 6 : qemu-kvm (Unpatched Vulnerability)	Nessus	Red Hat Local Security Checks	critical
151383	EulerOS Virtualization 3.0.2.2 : qemu-kvm (EulerOS-SA-2021-2166)	Nessus	Huawei Local Security Checks	critical
150537	SUSE SLES11 Security Update : kvm (SUSE-SU-2021:14704-1)	Nessus	SuSE Local Security Checks	high
148966	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1305-1)	Nessus	SuSE Local Security Checks	high
148761	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1241-1)	Nessus	SuSE Local Security Checks	high
148758	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1240-1)	Nessus	SuSE Local Security Checks	high
148757	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1244-1)	Nessus	SuSE Local Security Checks	high
148752	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1245-1)	Nessus	SuSE Local Security Checks	high
148751	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1242-1)	Nessus	SuSE Local Security Checks	high
147918	Amazon Linux AMI : qemu-kvm (ALAS-2021-1488)	Nessus	Amazon Linux Local Security Checks	medium
147909	Amazon Linux 2 : qemu (ALAS-2021-1617)	Nessus	Amazon Linux Local Security Checks	medium
147700	EulerOS Virtualization 2.9.0 : qemu (EulerOS-SA-2021-1667)	Nessus	Huawei Local Security Checks	high
147523	EulerOS Virtualization 2.9.1 : qemu (EulerOS-SA-2021-1632)	Nessus	Huawei Local Security Checks	high
147490	EulerOS Virtualization 3.0.6.6 : qemu (EulerOS-SA-2021-1455)	Nessus	Huawei Local Security Checks	medium
146098	CentOS 7 : qemu-kvm (RHSA-2021:0347)	Nessus	CentOS Local Security Checks	medium
146077	Oracle Linux 7 : qemu-kvm (ELSA-2021-0347)	Nessus	Oracle Linux Local Security Checks	medium
146075	RHEL 7 : qemu-kvm (RHSA-2021:0347)	Nessus	Red Hat Local Security Checks	medium
140317	EulerOS Virtualization for ARM 64 3.0.2.0 : qemu-kvm (EulerOS-SA-2020-1947)	Nessus	Huawei Local Security Checks	medium
139725	Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS : QEMU vulnerabilities (USN-4467-1)	Nessus	Ubuntu Local Security Checks	medium
138911	Debian DLA-2288-1 : qemu security update	Nessus	Debian Local Security Checks	medium
137887	Debian DLA-2262-1 : qemu security update	Nessus	Debian Local Security Checks	medium

Detections

Analytics

CVE-2020-13765

medium

Tenable Plugins

medium

critical

critical

critical

high

high

high

high

high

high

high

medium

medium

high

high

medium

medium

medium

medium

medium

medium

medium

medium