hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host controller driver.

The remote Redhat Enterprise Linux 7 host has one or more packages installed that are affected by multiple vulnerabilities that have been acknowledged by the vendor but will not be patched.

  - QEMU: msix: OOB access during mmio operations may lead to DoS (CVE-2020-13754)

  - The Virtio Vring implementation in QEMU allows local OS guest users to cause a denial of service (divide-     by-zero error and QEMU process crash) by unsetting vring alignment while updating Virtio rings.
    (CVE-2017-17381)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

Note that Nessus has not tested for these issues but has instead relied on the package manager's report that the package is installed.

The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-3099 advisory.

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an unvalidated address, which leads to an out-of-bounds read     during sdhci_write() operations. A guest OS user can crash the QEMU process. (CVE-2020-13253)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

  - A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI     I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req'     from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
    (CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A heap buffer overflow was found in the floppy disk emulator of QEMU up to 6.0.0 (including). It could     occur in fdctrl_transfer_handler() in hw/block/fdc.c while processing DMA read data transfers from the     floppy drive to the guest system. A privileged guest user could use this flaw to crash the QEMU process on     the host resulting in DoS scenario, or potential information leakage from the host memory. (CVE-2021-3507)

  - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a     single, large transfer request, to reduce the overhead and improve performance. The combined size of the     bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper     validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the     array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a     denial of service. (CVE-2021-3527)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while     handling a PVRDMA_CMD_CREATE_MR command due to improper memory remapping (mremap). This flaw allows a     malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to     system availability. (CVE-2021-3582)

  - An integer overflow was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions     prior to 6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest due to     improper input validation. This flaw allows a privileged guest user to make QEMU allocate a large amount     of memory, resulting in a denial of service. The highest threat from this vulnerability is to system     availability. (CVE-2021-3607)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to     6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest and may result in a     crash of QEMU or cause undefined behavior due to the access of an uninitialized pointer. The highest     threat from this vulnerability is to system availability. (CVE-2021-3608)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc()     function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer     overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or     potentially execute arbitrary code within the context of the QEMU process. (CVE-2021-4206)

  - A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values     `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object     followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw     to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU     process. (CVE-2021-4207)

  - A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached     from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results.
    Affected QEMU versions <= 6.2.0. (CVE-2022-26354)

  - softmmu/physmem.c in QEMU through 7.0.0 can perform an uninitialized read on the translate_fail path,     leading to an io_readx or io_writex crash. (CVE-2022-35414)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an unvalidated address, which leads to an out-of-bounds read     during sdhci_write() operations. A guest OS user can crash the QEMU process. (CVE-2020-13253)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an out-of-bounds access during an es1370_write() operation.
    (CVE-2020-13361)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS user. (CVE-2020-13362)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a NULL pointer dereference related to BounceBuffer.
    (CVE-2020-13659)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access by providing an     address near the end of the PCI configuration space. (CVE-2020-13791)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - A heap-based buffer overflow was found in QEMU through 5.0.0 in the SDHCI device emulation support. It     could occur while doing a multi block SDMA transfer via the sdhci_sdma_transfer_multi_blocks() routine in     hw/sd/sdhci.c. A guest user or process could use this flaw to crash the QEMU process on the host,     resulting in a denial of service condition, or potentially execute arbitrary code with privileges of the     QEMU process on the host. (CVE-2020-17380)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to     the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This     flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of     service or potential code execution. QEMU up to (including) 5.2.0 is affected by this. (CVE-2021-3409)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the version of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerability :

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2021:14704-1 advisory.

  - The vmware-vga driver (hw/display/vmware_vga.c) in QEMU allows local guest users to write to qemu memory     locations and gain privileges via unspecified parameters related to rectangle handling. (CVE-2014-3689)

  - The VNC websocket frame decoder in QEMU allows remote attackers to cause a denial of service (memory and     CPU consumption) via a large (1) websocket payload or (2) HTTP headers section. (CVE-2015-1779)

  - In QEMU through 5.0.0, an integer overflow was found in the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial of service. (CVE-2020-12829)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an out-of-bounds access during an es1370_write() operation.
    (CVE-2020-13361)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS user. (CVE-2020-13362)

  - rom_copy() in hw/core/loader.c in QEMU 4.0 and 4.1.0 does not validate the relationship between two     addresses, which allows attackers to trigger an invalid memory copy operation. (CVE-2020-13765)

  - An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before     5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the     privileges of the QEMU process on the host. (CVE-2020-14364)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

This update for qemu fixes the following issues :

  - CVE-2020-12829: Fix OOB access in sm501 device emulation     (bsc#1172385)

  - CVE-2020-25723: Fix use-after-free in usb xhci packet     handling (bsc#1178934)

  - CVE-2020-25084: Fix use-after-free in usb ehci packet     handling (bsc#1176673)

  - CVE-2020-25625: Fix infinite loop (DoS) in usb hcd-ohci     emulation (bsc#1176684)

  - CVE-2020-25624: Fix OOB access in usb hcd-ohci emulation     (bsc#1176682)

  - CVE-2020-27617: Fix guest triggerable assert in shared     network handling code (bsc#1178174)

  - CVE-2020-28916: Fix infinite loop (DoS) in e1000e device     emulation (bsc#1179468)

  - CVE-2020-29443: Fix OOB access in atapi emulation     (bsc#1181108)

  - CVE-2020-27821: Fix heap overflow in MSIx emulation     (bsc#1179686)

  - CVE-2020-15469: Fix NULL pointer deref. (DoS) in mmio     ops (bsc#1173612)

  - CVE-2021-20257: Fix infinite loop (DoS) in e1000 device     emulation (bsc#1182577)

  - CVE-2021-3416: Fix OOB access (stack overflow) in     rtl8139 NIC emulation (bsc#1182968)

  - CVE-2021-3416: Fix OOB access (stack overflow) in other     NIC emulations (bsc#1182968)

  - CVE-2020-27616: Fix OOB access in ati-vga emulation     (bsc#1178400)

  - CVE-2020-29129: Fix OOB access in SLIRP ARP/NCSI packet     processing (bsc#1179466, CVE-2020-29130, bsc#1179467)

  - Fix package scripts to not use hard coded paths for     temporary working directories and log files     (bsc#1182425)

  - Add split-provides through forsplits/13 to cover updates     of SLE15-SP2 to SLE15-SP3, and openSUSE equivalents     (bsc#1184064)

  - Added a few more usability improvements for our git     packaging workflow

This update was imported from the SUSE:SLE-15-SP2:Update update project.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Drop the 'ampersand 0x25 shift altgr' line in pt-br keymap file (bsc#1129962)

Fix migration failure with error message: 'error while loading state section id 3(ram) (bsc#1154790)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

CVE-2020-12829: Fix OOB access in sm501 device emulation (bsc#1172385)

CVE-2020-25723: Fix use-after-free in usb xhci packet handling (bsc#1178934)

CVE-2020-25084: Fix use-after-free in usb ehci packet handling (bsc#1176673)

CVE-2020-25625: Fix infinite loop (DoS) in usb hcd-ohci emulation (bsc#1176684)

CVE-2020-25624: Fix OOB access in usb hcd-ohci emulation (bsc#1176682)

CVE-2020-27617: Fix guest triggerable assert in shared network handling code (bsc#1178174)

CVE-2020-28916: Fix infinite loop (DoS) in e1000e device emulation (bsc#1179468)

CVE-2020-29443: Fix OOB access in atapi emulation (bsc#1181108)

CVE-2020-27821: Fix heap overflow in MSIx emulation (bsc#1179686)

CVE-2020-15469: Fix NULL pointer deref. (DoS) in mmio ops (bsc#1173612)

CVE-2021-20257: Fix infinite loop (DoS) in e1000 device emulation (bsc#1182577)

CVE-2021-3416: Fix OOB access (stack overflow) in rtl8139 NIC emulation (bsc#1182968)

CVE-2021-3416: Fix OOB access (stack overflow) in other NIC emulations (bsc#1182968)

CVE-2020-27616: Fix OOB access in ati-vga emulation (bsc#1178400)

CVE-2020-29129: Fix OOB access in SLIRP ARP/NCSI packet processing (bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Add split-provides through forsplits/13 to cover updates of SLE15-SP2 to SLE15-SP3, and openSUSE equivalents (bsc#1184064)

Added a few more usability improvements for our git packaging workflow

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb iehci packet handling (CVE-2020-25084, bsc#1176673)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Make note that this patch previously included addresses (CVE-2020-13765 bsc#1172478)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix vfio-pci device on s390 enters error state (bsc#1179725)

Fix PCI devices are unavailable after a subsystem reset. (bsc#1179726)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - In QEMU through 5.0.0, an integer overflow was found in     the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write     operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to     crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial     of service.(CVE-2020-12829)

  - slirp.c in libslirp through 4.3.1 has a buffer     over-read because it tries to read a certain amount of     header data even if that exceeds the total packet     length.(CVE-2020-29130)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read     because it tries to read a certain amount of header     data even if that exceeds the total packet     length.(CVE-2020-29129)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop     via an RX descriptor with a NULL buffer     address.(CVE-2020-28916)

  - ati_2d_blt in hw/display/ati_2d.c in QEMU 4.2.1 can     encounter an outside-limits situation in a calculation.
    A guest can crash the QEMU process.(CVE-2020-27616)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows     guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a     valid Layer 3 protocol.(CVE-2020-27617)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c     misuses snprintf return values, leading to a buffer     overflow in later code.(CVE-2020-8608)

  - tcp_emu in tcp_subr.c in libslirp 4.1.0, as used in     QEMU 4.2.0, mismanages memory, as demonstrated by IRC     DCC commands in EMU_IRC. This can cause a heap-based     buffer overflow or other out-of-bounds access which can     lead to a DoS or potential execute arbitrary     code.(CVE-2020-7039)

  - ip_reass in ip_input.c in libslirp 4.0.0 has a     heap-based buffer overflow via a large packet because     it mishandles a case involving the first     fragment.(CVE-2019-14378)

  - A flaw was found in the memory management API of QEMU     during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access     to the MSI-X table while performing MMIO operations. A     guest user may abuse this flaw to crash the QEMU     process on the host, resulting in a denial of service.
    This flaw affects QEMU versions prior to     5.2.0.(CVE-2020-27821)

  - QEMU: reachable assertion failure in     net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c     (CVE-2020-16092)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to     trigger an out-of-bounds access by providing an address     near the end of the PCI configuration     space(CVE-2020-13791)

  - qmp_guest_file_read in qga/commands-posix.c and     qga/commands-win32.c in qemu-ga (aka QEMU Guest Agent)     in QEMU 2.12.50 has an integer overflow causing a     g_malloc0() call to trigger a segmentation fault when     trying to allocate a large memory chunk. The     vulnerability can be exploited by sending a crafted QMP     command (including guest-file-read with a large count     value) to the agent via the listening     socket.(CVE-2018-12617)

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an     unvalidated address, which leads to an out-of-bounds     read during sdhci_write() operations. A guest OS user     can crash the QEMU process.(CVE-2020-13253)

  - QEMU 4.1.0 has a memory leak in zrle_compress_data in     ui/vnc-enc-zrle.c during a VNC disconnect operation     because libz is misused, resulting in a situation where     memory allocated in deflateInit2 is not freed in     deflateEnd.(CVE-2019-20382)

  - An integer overflow was found in QEMU 4.0.1 through     4.2.0 in the way it implemented ATI VGA emulation. This     flaw occurs in the ati_2d_blt() routine in     hw/display/ati-2d.c while handling MMIO write     operations through the ati_mm_write() callback. A     malicious guest could abuse this flaw to crash the QEMU     process, resulting in a denial of     service.(CVE-2020-11869)

  - This vulnerability has been modified since it was last     analyzed by the NVD. It is awaiting reanalysis which     may result in further changes to the information     provided.(CVE-2020-13659)

  - A flaw was found in QEMU in the implementation of the     Pointer Authentication (PAuth) support for ARM     introduced in version 4.0 and fixed in version 5.0.0. A     general failure of the signature generation process     caused every PAuth-enforced pointer to be signed with     the same signature. A local attacker could obtain the     signature of a protected pointer and abuse this flaw to     bypass PAuth protection for all programs running on     QEMU.(CVE-2020-10702)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - ** DISPUTED ** An issue was discovered in ide_dma_cb()     in hw/ide/core.c in QEMU 2.4.0 through 4.2.0. The guest     system can crash the QEMU process in the host system     via a special SCSI_IOCTL_SEND_COMMAND. It hits an     assertion that implies that the size of successful DMA     transfers there must be a multiple of 512 (the size of     a sector). NOTE: a member of the QEMU security team     disputes the significance of this issue because a     'privileged guest user has many ways to cause similar     DoS effect, without triggering this     assert.'(CVE-2019-20175)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

  - libslirp 4.0.0, as used in QEMU 4.1.0, has a     use-after-free in ip_reass in     ip_input.c.(CVE-2019-15890)

  - A use after free vulnerability in ip_reass() in     ip_input.c of libslirp 4.2.0 and prior releases allows     crafted packets to cause a denial of     service.(CVE-2020-1983)

  - ati-vga in hw/display/ati.c in QEMU 4.2.0 allows guest     OS users to trigger infinite recursion via a crafted     mm_index value during an ati_mm_read or ati_mm_write     call.(CVE-2020-13800)

  - An out-of-bounds heap buffer access flaw was found in     the way the iSCSI Block driver in QEMU versions 2.12.0     before 4.2.1 handled a response coming from an iSCSI     server while checking the status of a Logical Address     Block (LBA) in an iscsi_co_block_status() routine. A     remote user could use this flaw to crash the QEMU     process, resulting in a denial of service or potential     execution of arbitrary code with privileges of the QEMU     process on the host.(CVE-2020-1711)

  - tftp.c in libslirp 4.1.0, as used in QEMU 4.2.0, does     not prevent ..\ directory traversal on     Windows.(CVE-2020-7211)

  - An out-of-bounds read vulnerability was found in the     SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine     while replying to an ICMP echo request, also known as     ping. This flaw allows a malicious guest to leak the     contents of the host memory, resulting in possible     information disclosure. This flaw affects versions of     libslirp before 4.3.1.(CVE-2020-10756)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL     pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call.(CVE-2020-25743)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before     5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid     pointer.(CVE-2020-25742)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows     guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a     valid Layer 3 protocol.(CVE-2020-27617)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a     NULL pointer dereference related to     BounceBuffer.(CVE-2020-13659)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - In QEMU through 5.0.0, an assertion failure can occur     in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious     guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of     service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c.(CVE-2020-16092)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - The (1) v9fs_create and (2) v9fs_lcreate functions in     hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local     guest OS privileged users to cause a denial of service     (file descriptor or memory consumption) via vectors     related to an already in-use fid.(CVE-2017-7377)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

  - An out-of-bounds read/write access flaw was found in     the USB emulator of the QEMU in versions before 5.2.0.
    This issue occurs while processing USB packets from a     guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out     routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the     potential execution of arbitrary code with the     privileges of the QEMU process on the     host.(CVE-2020-14364)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-9034 advisory.

    - Document CVE-2020-25723 as fixed (Mark Kanda)  [Orabug: 32222397]  {CVE-2020-25084} {CVE-2020-25723}
    - hw/net/e1000e: advance desc_offset in case of null descriptor (Prasad J Pandit)  [Orabug: 32217517]     {CVE-2020-28916}
    - libslirp: Update version to include CVE fixes (Mark Kanda)  [Orabug: 32208456] [Orabug: 32208462]     {CVE-2020-29129} {CVE-2020-29130}
    - Document CVE-2020-25624 as fixed (Mark Kanda)  [Orabug: 32212527]  {CVE-2020-25624} {CVE-2020-25625}
    - ati: check x y display parameter values (Prasad J Pandit)  [Orabug: 32108251]  {CVE-2020-27616}
    - hw: usb: hcd-ohci: check for processed TD before retire (Prasad J Pandit)  [Orabug: 31901690]     {CVE-2020-25625}
    - hw: usb: hcd-ohci: check len and frame_number variables (Prasad J Pandit)  [Orabug: 31901690]     {CVE-2020-25625}
    - hw: ehci: check return value of 'usb_packet_map' (Li Qiang)  [Orabug: 31901649]  {CVE-2020-25084}
    - hw: xhci: check return value of 'usb_packet_map' (Li Qiang)  [Orabug: 31901649]  {CVE-2020-25084}
    - usb: fix setup_len init (CVE-2020-14364) (Gerd Hoffmann)  [Orabug: 31848849]  {CVE-2020-14364}
    - Document CVE-2020-12829 and CVE-2020-14415 as fixed (Mark Kanda)  [Orabug: 31855502] [Orabug: 31855427]     {CVE-2020-12829} {CVE-2020-14415}
    - hw/net/xgmac: Fix buffer overflow in xgmac_enet_send() (Mauro Matteo Cascella)  [Orabug: 31667649]     {CVE-2020-15863}
    - hw/net/net_tx_pkt: fix assertion failure in net_tx_pkt_add_raw_fragment() (Mauro Matteo Cascella)     [Orabug: 31737809]  {CVE-2020-16092}
    - hw/sd/sdcard: Do not switch to ReceivingData if address is invalid (Philippe Mathieu-Daude)  [Orabug:
    31414336]  {CVE-2020-13253}
    - hw/sd/sdcard: Do not allow invalid SD card sizes (Philippe Mathieu-Daude)  [Orabug: 31414336]     {CVE-2020-13253}
    - libslirp: Update to v4.3.1 to fix CVE-2020-10756 (Karl Heubaum)  [Orabug: 31604999]  {CVE-2020-10756}
    - Document CVEs as fixed 2/2 (Karl Heubaum)  [Orabug: 30618035]  {CVE-2017-18043} {CVE-2018-10839}     {CVE-2018-11806} {CVE-2018-12617} {CVE-2018-15746} {CVE-2018-16847} {CVE-2018-16867} {CVE-2018-17958}     {CVE-2018-17962} {CVE-2018-17963} {CVE-2018-18849} {CVE-2018-19364} {CVE-2018-19489} {CVE-2018-3639}     {CVE-2018-5683} {CVE-2018-7550} {CVE-2018-7858} {CVE-2019-12068} {CVE-2019-15034} {CVE-2019-15890}     {CVE-2019-20382} {CVE-2020-10702} {CVE-2020-10761} {CVE-2020-11102} {CVE-2020-11869} {CVE-2020-13361}     {CVE-2020-13765} {CVE-2020-13800} {CVE-2020-1711} {CVE-2020-1983} {CVE-2020-8608}
    - Document CVEs as fixed 1/2 (Karl Heubaum)  [Orabug: 30618035]  {CVE-2017-10806} {CVE-2017-11334}     {CVE-2017-12809} {CVE-2017-13672} {CVE-2017-13673} {CVE-2017-13711} {CVE-2017-14167} {CVE-2017-15038}     {CVE-2017-15119} {CVE-2017-15124} {CVE-2017-15268} {CVE-2017-15289} {CVE-2017-16845} {CVE-2017-17381}     {CVE-2017-18030} {CVE-2017-2630} {CVE-2017-2633} {CVE-2017-5715} {CVE-2017-5753} {CVE-2017-5754}     {CVE-2017-5931} {CVE-2017-6058} {CVE-2017-7471} {CVE-2017-7493} {CVE-2017-8112} {CVE-2017-8309}     {CVE-2017-8379} {CVE-2017-8380} {CVE-2017-9503} {CVE-2017-9524} {CVE-2018-12126} {CVE-2018-12127}     {CVE-2018-12130} {CVE-2018-16872} {CVE-2018-20123} {CVE-2018-20124} {CVE-2018-20125} {CVE-2018-20126}     {CVE-2018-20191} {CVE-2018-20216} {CVE-2018-20815} {CVE-2019-11091} {CVE-2019-12155} {CVE-2019-14378}     {CVE-2019-3812} {CVE-2019-5008} {CVE-2019-6501} {CVE-2019-6778} {CVE-2019-8934} {CVE-2019-9824}
    - exec: set map length to zero when returning NULL (Prasad J Pandit)  [Orabug: 31439733]  {CVE-2020-13659}
    - megasas: use unsigned type for reply_queue_head and check index (Prasad J Pandit)  [Orabug: 31414338]     {CVE-2020-13362}
    - memory: Revert 'memory: accept mismatching sizes in memory_region_access_valid' (Michael S. Tsirkin)     [Orabug: 31439736] [Orabug: 31452202]  {CVE-2020-13754} {CVE-2020-13791}
    - Document CVE-2020-13765 as fixed (Karl Heubaum)  [Orabug: 31463250]  {CVE-2020-13765}
    - ati-vga: check mm_index before recursive call (CVE-2020-13800) (Prasad J Pandit)  [Orabug: 31452206]     {CVE-2020-13800}
    - es1370: check total frame count against current frame (Prasad J Pandit)  [Orabug: 31463235]     {CVE-2020-13361}
    - ati-vga: Fix checks in ati_2d_blt() to avoid crash (BALATON Zoltan)  [Orabug: 31238432]     {CVE-2020-11869}
    - libslirp: Update to stable-4.2 to fix CVE-2020-1983 (Karl Heubaum)  [Orabug: 31241227]  {CVE-2020-1983}
    - Document CVEs as fixed (Karl Heubaum)   {CVE-2019-12068} {CVE-2019-15034}
    - libslirp: Update to version 4.2.0 to fix CVEs (Karl Heubaum)  [Orabug: 30274592] [Orabug: 30869830]     {CVE-2019-15890} {CVE-2020-8608}
    - vnc: fix memory leak when vnc disconnect (Li Qiang)  [Orabug: 30996427]  {CVE-2019-20382}
    - iscsi: Cap block count from GET LBA STATUS (CVE-2020-1711) (Felipe Franciosi)  [Orabug: 31124035]     {CVE-2020-1711}

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In QEMU through 5.0.0, an integer overflow was found in     the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write     operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to     crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial     of service.(CVE-2020-12829)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop     via an RX descriptor with a NULL buffer     address.(CVE-2020-28916)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the version of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerability :

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4650-1 advisory.

    Alexander Bulekov discovered that QEMU incorrectly handled SDHCI device emulation. An attacker inside the     guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute     arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would     be isolated by the libvirt AppArmor profile.

    (CVE-2020-17380)

    Sergej Schumilo, Cornelius Aschermann, and Simon Wrner discovered that QEMU incorrectly handled USB device     emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial     of service. (CVE-2020-25084)

    Sergej Schumilo, Cornelius Aschermann, and Simon Wrner discovered that QEMU incorrectly handled SDHCI     device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a     denial of service. (CVE-2020-25085)

    Gaoning Pan, Yongkang Jia, and Yi Ren discovered that QEMU incorrectly handled USB device emulation. An     attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service.
    (CVE-2020-25624)

    It was discovered that QEMU incorrectly handled USB device emulation. An attacker inside the guest could     use this issue to cause QEMU to hang, resulting in a denial of service. (CVE-2020-25625)

    Cheolwoo Myung discovered that QEMU incorrectly handled USB device emulation. An attacker inside the guest     could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2020-25723)

    Gaoning Pan discovered that QEMU incorrectly handled ATI graphics device emulation. An attacker inside the     guest could use this issue to cause QEMU to crash, resulting in a denial of service. This issue only     affected Ubuntu 20.04 LTS and Ubuntu 20.10. (CVE-2020-27616)

    Gaoning Pan discovered that QEMU incorrectly handled networking. An attacker inside the guest could use     this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2020-27617)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Some issues have been found in qemu, a fast processor emulator.

All issues are related to assertion failures, out-of-bounds access failures or bad handling of return codes.

For Debian 9 stretch, these problems have been fixed in version 1:2.8+dfsg-6+deb9u12.

We recommend that you upgrade your qemu packages.

For the detailed security status of qemu please refer to its security tracker page at: https://security-tracker.debian.org/tracker/qemu

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
199674	RHEL 7 : qemu-kvm-ma (Unpatched Vulnerability)	Nessus	Red Hat Local Security Checks	medium
164678	Debian DLA-3099-1 : qemu - LTS security update	Nessus	Debian Local Security Checks	high
156489	EulerOS Virtualization 3.0.2.6 : qemu-kvm (EulerOS-SA-2021-2855)	Nessus	Huawei Local Security Checks	medium
151161	EulerOS Virtualization for ARM 64 3.0.6.0 : qemu-kvm (EulerOS-SA-2021-1994)	Nessus	Huawei Local Security Checks	medium
150537	SUSE SLES11 Security Update : kvm (SUSE-SU-2021:14704-1)	Nessus	SuSE Local Security Checks	high
149640	openSUSE Security Update : qemu (openSUSE-2021-600)	Nessus	SuSE Local Security Checks	medium
148966	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1305-1)	Nessus	SuSE Local Security Checks	high
148761	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1241-1)	Nessus	SuSE Local Security Checks	high
148758	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1240-1)	Nessus	SuSE Local Security Checks	high
148757	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1244-1)	Nessus	SuSE Local Security Checks	high
148755	SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2021:1243-1)	Nessus	SuSE Local Security Checks	medium
148752	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1245-1)	Nessus	SuSE Local Security Checks	high
148751	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1242-1)	Nessus	SuSE Local Security Checks	high
147700	EulerOS Virtualization 2.9.0 : qemu (EulerOS-SA-2021-1667)	Nessus	Huawei Local Security Checks	high
147523	EulerOS Virtualization 2.9.1 : qemu (EulerOS-SA-2021-1632)	Nessus	Huawei Local Security Checks	high
147490	EulerOS Virtualization 3.0.6.6 : qemu (EulerOS-SA-2021-1455)	Nessus	Huawei Local Security Checks	medium
146269	Oracle Linux 7 : qemu (ELSA-2021-9034)	Nessus	Oracle Linux Local Security Checks	medium
146243	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2021-1275)	Nessus	Huawei Local Security Checks	medium
146222	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2021-1256)	Nessus	Huawei Local Security Checks	medium
145713	EulerOS 2.0 SP8 : qemu (EulerOS-SA-2021-1169)	Nessus	Huawei Local Security Checks	medium
143376	Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS : QEMU vulnerabilities (USN-4650-1)	Nessus	Ubuntu Local Security Checks	medium
143305	Debian DLA-2469-1 : qemu security update	Nessus	Debian Local Security Checks	medium

Detections

Analytics

CVE-2020-25624

medium

Tenable Plugins

medium

high

medium

medium

high

medium

high

high

high

high

medium

high

high

high

high

medium

medium

medium

medium

medium

medium

medium