pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because pci_get_bus() might not return a valid pointer.

According to the versions of the qemu package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a     denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD)     list. (CVE-2015-8558)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for     CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and     other unexpected results. Affected QEMU version: 6.2.0. (CVE-2022-26353)

  - A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in     virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in     virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ.
    (CVE-2023-3180)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a     denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD)     list. (CVE-2015-8558)

  - Memory leak in the v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local     guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) via a     large number of Txattrcreate messages with the same fid number. (CVE-2016-9102)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access by providing an     address near the end of the PCI configuration space. (CVE-2020-13791)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - A NULL pointer dereference flaw was found in the megasas-gen2 SCSI host bus adapter emulation of QEMU in     versions before and including 6.0. This issue occurs in the megasas_command_cancelled() callback function     while dropping a SCSI request. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. The highest threat from this vulnerability is to system     availability. (CVE-2020-35503)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator     of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw     allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a     denial of service. The highest threat from this vulnerability is to system availability. (CVE-2021-20255)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

  - A heap buffer overflow was found in the floppy disk emulator of QEMU up to 6.0.0 (including). It could     occur in fdctrl_transfer_handler() in hw/block/fdc.c while processing DMA read data transfers from the     floppy drive to the guest system. A privileged guest user could use this flaw to crash the QEMU process on     the host resulting in DoS scenario, or potential information leakage from the host memory. (CVE-2021-3507)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

  - A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the     Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be     written to the controller's registers and trigger undesirable actions (such as reset) while the device is     still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could     use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or     potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects     QEMU versions before 7.0.0. (CVE-2021-3750)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc()     function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer     overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or     potentially execute arbitrary code within the context of the QEMU process. (CVE-2021-4206)

  - A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for     CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and     other unexpected results. Affected QEMU version: 6.2.0. (CVE-2022-26353)

  - An out-of-bounds read flaw was found in the QXL display device emulation in QEMU. The qxl_phys2virt()     function does not check the size of the structure pointed to by the guest physical address, potentially     reading past the end of the bar space into adjacent pages. A malicious guest user could use this flaw to     crash the QEMU process on the host causing a denial of service condition. (CVE-2022-4144)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL     dereference) when the command header 'ad->cur_cmd' is null. (CVE-2019-12067)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator     of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw     allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a     denial of service. The highest threat from this vulnerability is to system availability. (CVE-2021-20255)

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL     dereference) when the command header 'ad->cur_cmd' is null. (CVE-2019-12067)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI     I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req'     from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
    (CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a     single, large transfer request, to reduce the overhead and improve performance. The combined size of the     bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper     validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the     array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a     denial of service. (CVE-2021-3527)

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the bootp_input() function and could occur while processing a udp packet that is smaller than     the size of the 'bootp_t' structure. A malicious guest could use this flaw to leak 10 bytes of     uninitialized heap memory from the host. The highest threat from this vulnerability is to data     confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3592)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the udp6_input() function and could occur while processing a udp packet that is smaller than the     size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3593)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the tftp_input() function and could occur while processing a udp packet that is smaller than the     size of the 'tftp_t' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3595)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - An out-of-bounds access flaw was found in the Message     Signalled Interrupt (MSI-X) device support of QEMU.
    This issue occurs while performing MSI-X mmio     operations when a guest sent address goes beyond the     mmio region. A guest user or process may use this flaw     to crash the QEMU process resulting in a denial of     service.(CVE-2020-13754)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL     pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call.(CVE-2020-25743)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before     5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid     pointer.(CVE-2020-25742)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in     flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE     case.(CVE-2020-25085)

  - The patch for CVE-2020-17380 and CVE-2020-25085, both     involving a heap buffer overflow in the SDHCI     controller emulation code of QEMU, was found to be     incomplete. A malicious privileged guest could     reproduce the same issues with specially crafted input,     inducing a bogus transfer and subsequent out-of-bounds     read/write access in sdhci_do_adma() or     sdhci_sdma_transfer_multi_blocks(). CVE-2021-3409 was     assigned to facilitate the tracking and backporting of     the new patch.(CVE-2021-3409)

  - A use-after-free flaw was found in the MegaRAID     emulator of QEMU. This issue occurs while processing     SCSI I/O requests in the case of an error     mptsas_free_request() that does not dequeue the request     object 'req' from a pending requests queue. This flaw     allows a privileged guest user to crash the QEMU     process on the host, resulting in a denial of     service.(CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was     found in various NIC emulators of QEMU. The issue     occurs in loopback mode of a NIC wherein reentrant DMA     checks get bypassed. A guest user/process may use this     flaw to consume CPU cycles or crash the QEMU process on     the host resulting in DoS scenario.(CVE-2021-3416)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL     pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call.(CVE-2020-25743)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before     5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid     pointer.(CVE-2020-25742)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows     guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a     valid Layer 3 protocol.(CVE-2020-27617)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a     NULL pointer dereference related to     BounceBuffer.(CVE-2020-13659)

  - A reachable assertion issue was found in the USB EHCI     emulation code of QEMU. It could occur while processing     USB requests due to missing handling of DMA memory map     failure. A malicious privileged user within the guest     may abuse this flaw to send bogus USB requests and     crash the QEMU process on the host, resulting in a     denial of service.(CVE-2020-25723)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop     when a TD list has a loop.(CVE-2020-25625)

  - In QEMU through 5.0.0, an assertion failure can occur     in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious     guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of     service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c.(CVE-2020-16092)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in     hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS     user.(CVE-2020-13362)

  - The (1) v9fs_create and (2) v9fs_lcreate functions in     hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local     guest OS privileged users to cause a denial of service     (file descriptor or memory consumption) via vectors     related to an already in-use fid.(CVE-2017-7377)

  - In QEMU 5.0.0 and earlier, es1370_transfer_audio in     hw/audio/es1370.c does not properly validate the frame     count, which allows guest OS users to trigger an     out-of-bounds access during an es1370_write()     operation.(CVE-2020-13361)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU     before 07-20-2020 has a buffer overflow. This occurs     during packet transmission and affects the highbank and     midway emulated machines. A guest user or process could     use this flaw to crash the QEMU process on the host,     resulting in a denial of service or potential     privileged code execution. This was fixed in commit     5519724a13664b43e225ca05351c60b4468e4555.(CVE-2020-1586     3)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based     buffer over-read via values obtained from the host     controller driver.(CVE-2020-25624)

  - rom_copy() in hw/core/loader.c in QEMU 4.1.0 does not     validate the relationship between two addresses, which     allows attackers to trigger an invalid memory copy     operation.(CVE-2020-13765)

  - An out-of-bounds read/write access flaw was found in     the USB emulator of the QEMU in versions before 5.2.0.
    This issue occurs while processing USB packets from a     guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out     routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the     potential execution of arbitrary code with the     privileges of the QEMU process on the     host.(CVE-2020-14364)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
188816	EulerOS Virtualization 3.0.6.0 : qemu (EulerOS-SA-2023-3460)	Nessus	Huawei Local Security Checks	high
175217	EulerOS Virtualization 3.0.2.0 : qemu-kvm (EulerOS-SA-2023-1688)	Nessus	Huawei Local Security Checks	high
159876	EulerOS Virtualization 2.10.0 : qemu (EulerOS-SA-2022-1418)	Nessus	Huawei Local Security Checks	high
159867	EulerOS Virtualization 2.10.1 : qemu (EulerOS-SA-2022-1392)	Nessus	Huawei Local Security Checks	high
157200	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2022-1034)	Nessus	Huawei Local Security Checks	high
157171	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2022-1014)	Nessus	Huawei Local Security Checks	high
151231	EulerOS Virtualization 3.0.6.6 : qemu-kvm (EulerOS-SA-2021-2046)	Nessus	Huawei Local Security Checks	medium
147490	EulerOS Virtualization 3.0.6.6 : qemu (EulerOS-SA-2021-1455)	Nessus	Huawei Local Security Checks	medium

Detections

Analytics

CVE-2020-25742

low

Tenable Plugins

high

high

high

high

high

high

medium

medium