A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the digest initialization will fail. There is a missing check for the return value from the initialization function which later leads to invalid usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider. PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS implementation in OpenSSL does not call these functions however third party applications would be affected if they call these functions to verify signatures on untrusted data.

The version of Oracle Business Intelligence Enterprise Edition (OAS) 7.6.0.0 installed on the remote host is affected by multiple vulnerabilities as referenced in the October 2024 CPU advisory, including the following:

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: Analytics Server (OpenSSL)). Supported versions that are affected are 7.0.0.0.0 and     7.6.0.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via TLS     to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this vulnerability     can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Business     Intelligence Enterprise Edition. (CVE-2023-5678)

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: Analytics Server (curl)). Supported versions that are affected are 7.0.0.0.0, 7.6.0.0.0     and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via     SOCKS5 to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this     vulnerability can result in takeover of Oracle Business Intelligence Enterprise Edition. (CVE-2023-38545)

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: BI Platform Security, Analytics Web Answers (RequireJS)). Supported versions that are     affected are 7.0.0.0.0, 7.6.0.0.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated     attacker with network access via HTTP to compromise Oracle Business Intelligence Enterprise Edition.     Successful attacks of this vulnerability can result in unauthorized access to critical data or complete     access to all Oracle Business Intelligence Enterprise Edition accessible data as well as unauthorized     update, insert or delete access to some of Oracle Business Intelligence Enterprise Edition accessible     data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Business     Intelligence Enterprise Edition. (CVE-2024-38999)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of Oracle Business Intelligence Enterprise Edition 12.2.1.4 installed on the remote host is affected by multiple vulnerabilities as referenced in the October 2024 CPU advisory, including the following:

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: Installation, BI Platform Security (OpenSSL)). Supported versions that are affected are     7.6.0.0.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network     access via TLS to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this     vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash     (complete DOS) of Oracle Business Intelligence Enterprise Edition. (CVE-2023-0401)

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: Analytics Server (curl)). Supported versions that are affected are 7.0.0.0.0, 7.6.0.0.0     and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via     SOCKS5 to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this     vulnerability can result in takeover of Oracle Business Intelligence Enterprise Edition. (CVE-2023-38545)

  - Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics     (component: BI Platform Security, Analytics Web Answers (RequireJS)). Supported versions that are     affected are 7.0.0.0.0, 7.6.0.0.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated     attacker with network access via HTTP to compromise Oracle Business Intelligence Enterprise Edition.     Successful attacks of this vulnerability can result in unauthorized access to critical data or complete     access to all Oracle Business Intelligence Enterprise Edition accessible data as well as unauthorized     update, insert or delete access to some of Oracle Business Intelligence Enterprise Edition accessible     data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Business     Intelligence Enterprise Edition. (CVE-2024-38999)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

An update of the nodejs package has been released.

An update of the openssl package has been released.

The remote CentOS Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the openssl-3.0.7-18.el9 build changelog.

  - Internally libssl in OpenSSL calls X509_verify_cert() on the client side to verify a certificate supplied     by a server. That function may return a negative return value to indicate an internal error (for example     out of memory). Such a negative return value is mishandled by OpenSSL and will cause an IO function (such     as SSL_connect() or SSL_do_handshake()) to not indicate success and a subsequent call to SSL_get_error()     to return the value SSL_ERROR_WANT_RETRY_VERIFY. This return value is only supposed to be returned by     OpenSSL if the application has previously called SSL_CTX_set_cert_verify_callback(). Since most     applications do not do this the SSL_ERROR_WANT_RETRY_VERIFY return value from SSL_get_error() will be     totally unexpected and applications may not behave correctly as a result. The exact behaviour will depend     on the application but it could result in crashes, infinite loops or other similar incorrect responses.
    This issue is made more serious in combination with a separate bug in OpenSSL 3.0 that will cause     X509_verify_cert() to indicate an internal error when processing a certificate chain. This will occur     where a certificate does not include the Subject Alternative Name extension but where a Certificate     Authority has enforced name constraints. This issue can occur even with valid chains. By combining the two     issues an attacker could induce incorrect, application dependent behaviour. Fixed in OpenSSL 3.0.1     (Affected 3.0.0). (CVE-2021-4044)

  - The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop     forever for non-prime moduli. Internally this function is used when parsing certificates that contain     elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point     encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has     invalid explicit curve parameters. Since certificate parsing happens prior to verification of the     certificate signature, any process that parses an externally supplied certificate may thus be subject to a     denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they     can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients     consuming server certificates - TLS servers consuming client certificates - Hosting providers taking     certificates or private keys from customers - Certificate authorities parsing certification requests from     subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that     use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS     issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate     which makes it slightly harder to trigger the infinite loop. However any operation which requires the     public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-     signed certificate to trigger the loop during verification of the certificate signature. This issue     affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the     15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected     1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). (CVE-2022-0778)

  - c_rehash script allows command injection (CVE-2022-1292)

  - Signer certificate verification returned inaccurate response when using OCSP_NOCHECKS (CVE-2022-1343)

  - OPENSSL_LH_flush() breaks reuse of memory (CVE-2022-1473)

  - the c_rehash script allows command injection (CVE-2022-2068)

  - AES OCB fails to encrypt some bytes on 32-bit x86 (CVE-2022-2097)

  - X.509 Email Address Buffer Overflow (CVE-2022-3602, CVE-2022-3786)

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    (CVE-2023-0216)

  - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA     public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash.
    This function can be called on public keys supplied from untrusted sources which could allow an attacker     to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but     applications might call the function if there are additional security requirements imposed by standards     such as FIPS 140-3. (CVE-2023-0217)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. (CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of Siemens SINEC NMS installed on the remote host is prior to 2.0.1.0. It is, therefore, affected by multiple vulnerabilities as referenced in the SSA-943925 advisory.

  - coreruleset (aka OWASP ModSecurity Core Rule Set) through 3.3.4 does not detect multiple Content-Type     request headers on some platforms. This might allow attackers to bypass a WAF with a crafted payload,     aka Content-Type confusion between the WAF and the backend application. This occurs when the web     application relies on only the last Content-Type header. Other platforms may reject the additional     Content-Type header or merge conflicting headers, leading to detection as a malformed header.
    (CVE-2023-38199)

  - Some mod_proxy configurations on Apache HTTP Server versions 2.4.0 through 2.4.55 allow a HTTP Request     Smuggling attack. Configurations are affected when mod_proxy is enabled along with some form of     RewriteRule or ProxyPassMatch in which a non-specific pattern matches some portion of the user-supplied     request-target (URL) data and is then re-inserted into the proxied request-target using variable     substitution. For example, something like: RewriteEngine on RewriteRule ^/here/(.*)     http://example.com:8080/elsewhere?$1; [P] ProxyPassReverse /here/ http://example.com:8080/ Request     splitting/smuggling could result in bypass of access controls in the proxy server, proxying unintended     URLs to existing origin servers, and cache poisoning. Users are recommended to update to at least version     2.4.56 of Apache HTTP Server. (CVE-2023-25690)

  - The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json     definition for a given module. This vulnerability affects all users using the experimental policy     mechanism in all active release lines: 16.x, 18.x and, 20.x. Please note that at the time this CVE was     issued, the policy is an experimental feature of Node.js. (CVE-2023-32002)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host is affected by the vulnerability described in GLSA-202402-08 (OpenSSL: Multiple Vulnerabilities)

  - OpenSSL supports creating a custom cipher via the legacy EVP_CIPHER_meth_new() function and associated     function calls. This function was deprecated in OpenSSL 3.0 and application authors are instead encouraged     to use the new provider mechanism in order to implement custom ciphers. OpenSSL versions 3.0.0 to 3.0.5     incorrectly handle legacy custom ciphers passed to the EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() and     EVP_CipherInit_ex2() functions (as well as other similarly named encryption and decryption initialisation     functions). Instead of using the custom cipher directly it incorrectly tries to fetch an equivalent cipher     from the available providers. An equivalent cipher is found based on the NID passed to     EVP_CIPHER_meth_new(). This NID is supposed to represent the unique NID for a given cipher. However it is     possible for an application to incorrectly pass NID_undef as this value in the call to     EVP_CIPHER_meth_new(). When NID_undef is used in this way the OpenSSL encryption/decryption initialisation     function will match the NULL cipher as being equivalent and will fetch this from the available providers.
    This will succeed if the default provider has been loaded (or if a third party provider has been loaded     that offers this cipher). Using the NULL cipher means that the plaintext is emitted as the ciphertext.
    Applications are only affected by this issue if they call EVP_CIPHER_meth_new() using NID_undef and     subsequently use it in a call to an encryption/decryption initialisation function. Applications that only     use SSL/TLS are not impacted by this issue. Fixed in OpenSSL 3.0.6 (Affected 3.0.0-3.0.5). (CVE-2022-3358)

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    (CVE-2023-0216)

  - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA     public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash.
    This function can be called on public keys supplied from untrusted sources which could allow an attacker     to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but     applications might call the function if there are additional security requirements imposed by standards     such as FIPS 140-3. (CVE-2023-0217)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. (CVE-2023-0401)

  - A security vulnerability has been identified in all supported versions of OpenSSL related to the     verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit     this vulnerability by creating a malicious certificate chain that triggers exponential use of     computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy     processing is disabled by default but can be enabled by passing the `-policy' argument to the command line     utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. (CVE-2023-0464)

  - Applications that use a non-default option when verifying certificates may be vulnerable to an attack from     a malicious CA to circumvent certain checks. Invalid certificate policies in leaf certificates are     silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A     malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent     policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled     by passing the `-policy' argument to the command line utilities or by calling the     `X509_VERIFY_PARAM_set1_policies()' function. (CVE-2023-0465)

  - The function X509_VERIFY_PARAM_add0_policy() is documented to implicitly enable the certificate policy     check when doing certificate verification. However the implementation of the function does not enable the     check which allows certificates with invalid or incorrect policies to pass the certificate verification.
    As suddenly enabling the policy check could break existing deployments it was decided to keep the existing     behavior of the X509_VERIFY_PARAM_add0_policy() function. Instead the applications that require OpenSSL to     perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the     policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument.
    Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications.
    (CVE-2023-0466)

  - Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be     very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL     subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to     very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT     IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit.
    OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the     OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT     IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER     is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the     translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n'     being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic     algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs     in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be     received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to     specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest     passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any     version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In     OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts     anything that processes X.509 certificates, including simple things like verifying its signature. The     impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's     certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client     authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509     certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so     these versions are considered not affected by this issue in such a way that it would be cause for concern,     and the severity is therefore considered low. (CVE-2023-2650)

  - Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated     data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV     algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding     or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently     unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated     data entries along with the encryption. To authenticate empty data the application has to call     EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input     buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of     performing the associated data authentication operation. The empty data thus will not be authenticated. As     this issue does not affect non-empty associated data authentication and we expect it to be rare for an     application to use empty associated data entries this is qualified as Low severity issue. (CVE-2023-2975)

  - Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary:
    Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key     or DH parameters may experience long delays. Where the key or parameters that are being checked have been     obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs     various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too     large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is     over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or     parameters that have been supplied. Some of those checks use the supplied modulus value even if it has     already been found to be too large. An application that calls DH_check() and supplies a key or parameters     obtained from an untrusted source could be vulernable to a Denial of Service attack. The function     DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those     other functions may similarly be affected. The other functions affected by this are DH_check_ex() and     EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications     when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The     OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. (CVE-2023-3446)

  - Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary:
    Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key     or DH parameters may experience long delays. Where the key or parameters that are being checked have been     obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs     various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter     value can also trigger an overly long computation during some of these checks. A correct q value, if     present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if     q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an     untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself     called by a number of other OpenSSL functions. An application calling any of those other functions may     similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check().
    Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the -check     option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS     providers are not affected by this issue. (CVE-2023-3817)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the digest initialization will fail. There is a missing check for the return value from the initialization function which later leads to invalid usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider. PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS implementation in OpenSSL does not call these functions however third party applications would be affected if they call these functions to verify signatures on untrusted data.

This plugin only works with Tenable.ot.
Please visit https://www.tenable.com/products/tenable-ot for more information.

The remote Ubuntu 22.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-6564-1 advisory.

    Hubert Kario discovered that Node.js incorrectly handled certain inputs. If a user or an automated system     were tricked into opening a specially crafted input file, a remote attacker could possibly use this issue     to obtain sensitive information. (CVE-2022-4304)

    CarpetFuzz, Dawei Wang discovered that Node.js incorrectly handled certain inputs. If a user or an     automated system were tricked into opening a specially crafted input file, a remote attacker could     possibly use this issue to cause a denial of service. (CVE-2022-4450)

    Octavio Galland and Marcel Bhme discovered that Node.js incorrectly handled certain inputs. If a user or     an automated system were tricked into opening a specially crafted input file, a remote attacker could     possibly use this issue to cause a denial of service. (CVE-2023-0215)

    David Benjamin discovered that Node.js incorrectly handled certain inputs. If a user or an automated     system were tricked into opening a specially crafted input file, a remote attacker could possibly use this     issue to obtain sensitive information. (CVE-2023-0286)

    Hubert Kario and Dmitry Belyavsky discovered that Node.js incorrectly handled certain inputs. If a user or     an automated system were tricked into opening a specially crafted input file, a remote attacker could     possibly use this issue to cause a denial of service. (CVE-2023-0401)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to its self-reported version, the Nessus Network Monitor running on the remote host is prior to 6.2.1. It is, therefore, affected by multiple vulnerabilities as referenced in the TNS-2023-19 advisory.

  - Nessus Network Monitor leverages third-party software to help provide underlying functionality. Several of     the third-party components (OpenSSL, expat) were found to contain vulnerabilities, and updated versions     have been made available by the providers.    Out of caution and in line with best practice, Tenable has     opted to upgrade these components to address the potential impact of the issues. Nessus Network Monitor     6.2.1 updates OpenSSL to version 3.0.8 and expat to version 2.5.0 to address the identified     vulnerabilities. Tenable has released Nessus Network Monitor 6.2.1 to address these issues. The     installation files can be obtained from the Tenable Downloads Portal     (https://www.tenable.com/downloads/nessus-network-monitor). (CVE-2021-45960, CVE-2021-46143,     CVE-2022-22822, CVE-2022-22823, CVE-2022-22824, CVE-2022-22825, CVE-2022-22826, CVE-2022-22827,     CVE-2022-23852, CVE-2022-23990, CVE-2022-25235, CVE-2022-25236, CVE-2022-25314, CVE-2022-25315,     CVE-2022-40674, CVE-2022-4203, CVE-2022-4304, CVE-2022-4450, CVE-2023-0215, CVE-2023-0216, CVE-2023-0217,     CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Rocky Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RLSA-2023:0946 advisory.

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    (CVE-2023-0216)

  - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA     public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash.
    This function can be called on public keys supplied from untrusted sources which could allow an attacker     to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but     applications might call the function if there are additional security requirements imposed by standards     such as FIPS 140-3. (CVE-2023-0217)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. (CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2023-101 advisory.

    A flaw was found in Open SSL. A read buffer overrun can be triggered in X.509 certificate verification,     specifically in name constraint checking. Note that this occurs after certificate chain signature     verification, and requires either a CA to have signed the malicious certificate or for the application to     continue certificate verification despite failure to construct a path to a trusted issuer. (CVE-2022-4203)

    A timing-based side channel exists in the OpenSSL RSA Decryption implementation, which could be sufficient     to recover a ciphertext across a network in a Bleichenbacher style attack. To achieve a successful     decryption, an attacker would have to be able to send a very large number of trial messages for     decryption. This issue affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP, and RSASVE. (CVE-2022-4304)

    A double-free vulnerability was found in OpenSSL's PEM_read_bio_ex function. The function     PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (for example,     CERTIFICATE), any header data, and the payload data. If the function succeeds, then the     name_out, header, and data arguments are populated with pointers to     buffers containing the relevant decoded data. The caller is responsible for freeing those buffers.
    Constructing a PEM file that results in 0 bytes of payload data is possible. In this case,     PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a     freed buffer. A double-free will occur if the caller also frees this buffer. This will most likely lead to     a crash. This could be exploited by an attacker who can supply malicious PEM files for parsing to achieve     a denial of service attack. (CVE-2022-4450)

    A use-after-free vulnerability was found in OpenSSL's BIO_new_NDEF function. The public API function     BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally     by OpenSSL to support the SMIME, CMS, and PKCS7 streaming capabilities, but it may also be called directly     by end-user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter     BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the     caller. Under certain conditions. For example, if a CMS recipient public key is invalid, the new filter     BIO is freed, and the function returns a NULL result indicating a failure. However, in this case, the BIO     chain is not properly cleaned up, and the BIO passed by the caller still retains internal pointers to the     previously freed filter BIO. If the caller then calls BIO_pop() on the BIO, a use-after-free will occur,     possibly resulting in a crash. (CVE-2023-0215)

    A flaw was found in OpenSSL. An invalid pointer dereference on read can be triggered when an application     tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. This     may result in an application crash which could lead to a denial of service. The TLS implementation in     OpenSSL does not call this function, however, third party applications might call these functions on     untrusted data. (CVE-2023-0216)

    A flaw was found in OpenSSL. An invalid pointer dereference on read can be triggered when an application     tries to check a malformed DSA public key by the EVP_PKEY_public_check() function, most likely leading to     an application crash. This function can be called on public keys supplied from untrusted sources, which     could allow an attacker to cause a denial of service. (CVE-2023-0217)

    A type confusion vulnerability was found in OpenSSL when OpenSSL X.400 addresses processing inside an     X.509 GeneralName. When CRL checking is enabled (for example, the application sets the     X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a     memcmp call, enabling them to read memory contents or cause a denial of service. In most cases, the attack     requires the attacker to provide both the certificate chain and CRL, of which neither needs a valid     signature. If the attacker only controls one of these inputs, the other input must already contain an     X.400 address as a CRL distribution point, which is uncommon. In this case, this vulnerability is likely     only to affect applications that have implemented their own functionality for retrieving CRLs over a     network. (CVE-2023-0286)

    A NULL pointer vulnerability was found in OpenSSL, which can be dereferenced when signatures are being     verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is     known to the OpenSSL library but the implementation of the hash algorithm is not available, the digest     initialization will fail. There is a missing check for the return value from the initialization function     which later leads to invalid usage of the digest API, most likely leading to a crash. (CVE-2023-0401)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to its self-reported version, the Tenable Nessus Agent running on the remote host is between 10.2.1 and 10.3.2. It is, therefore, affected by multiple vulnerabilities in OpenSSL prior to version 3.0.8:
    
    - An attacker that had observed a genuine connection between a client and a server could use the flaw to send trial       messages to the server and record the time taken to process them. After a sufficiently large number of messages       the attacker could recover the pre-master secret used for the original connection. (CVE-2022-4304)

    - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes any header data and the payload       data. Under certain conditions, a double free will occur. This will most likely lead to a crash. (CVE-2022-4450)

    - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. Under certain conditions,       the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously       freed filter BIO. This will most likely result in a crash. (CVE-2023-0215)

    - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data. The result of the       dereference is an application crash which could lead to a denial of service attack. (CVE-2023-0216)

    - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the       EVP_PKEY_public_check() function. This will most likely lead to an application crash. (CVE-2023-0217)

    - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash       algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the       digest initialization will fail. (CVE-2023-0401) 

    - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking, which       might result in a crash which could lead to a denial of service attack. (CVE-2022-4203)           Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2023:1199 advisory.

    OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS)     protocols, as well as a full-strength general-purpose cryptography library.

    Security Fix(es):

    * openssl: X.400 address type confusion in X.509 GeneralName (CVE-2023-0286)

    * openssl: read buffer overflow in X.509 certificate verification (CVE-2022-4203)

    * openssl: timing attack in RSA Decryption implementation (CVE-2022-4304)

    * openssl: double free after calling PEM_read_bio_ex (CVE-2022-4450)

    * openssl: use-after-free following BIO_new_NDEF (CVE-2023-0215)

    * openssl: invalid pointer dereference in d2i_PKCS7 functions (CVE-2023-0216)

    * openssl: NULL dereference validating DSA public key (CVE-2023-0217)

    * openssl: NULL dereference during PKCS7 data verification (CVE-2023-0401)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Bug Fix(es):

    * HMAC generation should reject key lengths < 112 bits or provide an indicator in FIPS mode (BZ#2144001)

    * In FIPS mode, openssl should set a minimum length for passwords in PBKDF2 (BZ#2144004)

    * stunnel consumes high amount of memory when pestered with TCP connections without a TLS handshake     (BZ#2144009)

    * In FIPS mode, openssl should reject SHAKE as digest for RSA-OAEP or provide an indicator (BZ#2144011)

    * In FIPS mode, openssl should reject RSASSA-PSS salt lengths larger than the output size of the hash     function used, or provide an indicator (BZ#2144013)

    * In FIPS mode, openssl should reject RSA signatures with X9.31 padding, or provide an indicator     (BZ#2144016)

    * In FIPS mode, openssl should reject SHA-224, SHA-384, SHA-512-224, and SHA-512-256 as hashes for hash-     based DRBGs, or provide an indicator after 2023-05-16 (BZ#2144018)

    * In FIPS mode, openssl should reject KDF input and output key lengths < 112 bits or provide an indicator     (BZ#2144020)

    * In FIPS mode, openssl should reject RSA keys < 2048 bits when using EVP_PKEY_decapsulate, or provide an     indicator (BZ#2145171)

    * OpenSSL FIPS checksum code needs update (BZ#2158413)

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to its self-reported version, the Tenable Nessus application running on the remote host is between 10.2.1 and 10.4.2. It is, therefore, affected by multiple vulnerabilities in OpenSSL prior to version 3.0.8:
    
    - An attacker that had observed a genuine connection between a client and a server could use the flaw to send trial       messages to the server and record the time taken to process them. After a sufficiently large number of messages       the attacker could recover the pre-master secret used for the original connection. (CVE-2022-4304)

    - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes any header data and the payload       data. Under certain conditions, a double free will occur. This will most likely lead to a crash. (CVE-2022-4450)

    - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. Under certain conditions,       the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously       freed filter BIO. This will most likely result in a crash. (CVE-2023-0215)

    - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data. The result of the       dereference is an application crash which could lead to a denial of service attack. (CVE-2023-0216)

    - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the       EVP_PKEY_public_check() function. This will most likely lead to an application crash. (CVE-2023-0217)

    - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash       algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the       digest initialization will fail. (CVE-2023-0401) 

    - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking, which       might result in a crash which could lead to a denial of service attack. (CVE-2022-4203)

According to its self-reported version, the Tenable SecurityCenter application installed on the remote host is running 6.0.0 and is therefore affected by multiple vulnerabilities in OpenSSL prior to version 3.0.8:
    
    - An attacker that had observed a genuine connection between a client and a server could use the flaw to send trial       messages to the server and record the time taken to process them. After a sufficiently large number of messages       the attacker could recover the pre-master secret used for the original connection. (CVE-2022-4304)

    - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes any header data and the payload       data. Under certain conditions, a double free will occur. This will most likely lead to a crash. (CVE-2022-4450)

    - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. Under certain conditions,       the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously       freed filter BIO. This will most likely result in a crash. (CVE-2023-0215)

    - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data. The result of the       dereference is an application crash which could lead to a denial of service attack. (CVE-2023-0216)

    - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the       EVP_PKEY_public_check() function. This will most likely lead to an application crash. (CVE-2023-0217)

    - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash       algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the       digest initialization will fail. (CVE-2023-0401) 

    - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking, which       might result in a crash which could lead to a denial of service attack. (CVE-2022-4203)

According to its self-reported version, the Tenable Nessus application running on the remote host is 10.4.2 or earlier. It is, therefore, affected by multiple vulnerabilities in OpenSSL prior to version 3.0.8, spin.js prior to version 2.3.2, and datatables.net prior to version 1.13.2:
    
    - An attacker that had observed a genuine connection between a client and a server could use the flaw to send trial       messages to the server and record the time taken to process them. After a sufficiently large number of messages       the attacker could recover the pre-master secret used for the original connection. (CVE-2022-4304)

    - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes any header data and the payload       data. Under certain conditions, a double free will occur. This will most likely lead to a crash. (CVE-2022-4450)

    - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. Under certain conditions,       the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously       freed filter BIO. This will most likely result in a crash. (CVE-2023-0215)

    - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data. The result of the       dereference is an application crash which could lead to a denial of service attack. (CVE-2023-0216)

    - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the       EVP_PKEY_public_check() function. This will most likely lead to an application crash. (CVE-2023-0217)

    - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash       algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the       digest initialization will fail. (CVE-2023-0401) 

    - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking, which       might result in a crash which could lead to a denial of service attack. (CVE-2022-4203)

    - All versions of package datatables.net are vulnerable to Prototype Pollution due to an incomplete fix for       https:/snyk.io/vuln/SNYK-JS-DATATABLESNET-598806. (CVE-2020-28458)

    - With the package datatables.net before 1.11.3 if an array is passed to the HTML escape entities function it would not       have its contents escaped. (CVE-2021-23445)

    - jQuery before 3.4.0, as used in Drupal, Backdrop CMS, and other products, mishandles jQuery.extend(true, {}, ...) because of       Object.prototype pollution. If an unsanitized source object contained an enumerable __proto__ property, it could extend the       native Object.prototype. (CVE-2019-11358)

    - In jQuery versions greater than or equal to 1.0.3 and before 3.5.0, passing HTML containing <option> elements from untrusted       sources, even after sanitizing it, to one of jQuery DOM manipulation methods may execute untrusted code. (CVE-2020-11023)

    - jquery prior to 1.9.0 allows Cross-site Scripting attacks via the load method that fails to recognize and remove <script>       HTML tags that contain a whitespace character and trigger execution of the enclosed script logic. (CVE-2020-7656)

The remote Oracle Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2023-12152 advisory.

    - Fixed X.509 Name Constraints Read Buffer Overflow       Resolves: CVE-2022-4203
    - Fixed Timing Oracle in RSA Decryption       Resolves: CVE-2022-4304
    - Fixed Double free after calling PEM_read_bio_ex       Resolves: CVE-2022-4450
    - Fixed Use-after-free following BIO_new_NDEF       Resolves: CVE-2023-0215
    - Fixed Invalid pointer dereference in d2i_PKCS7 functions       Resolves: CVE-2023-0216
    - Fixed NULL dereference validating DSA public key       Resolves: CVE-2023-0217
    - Fixed X.400 address type confusion in X.509 GeneralName       Resolves: CVE-2023-0286
    - Fixed NULL dereference during PKCS7 data verification       Resolves: CVE-2023-0401

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote AlmaLinux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALSA-2023:0946 advisory.

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    (CVE-2023-0216)

  - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA     public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash.
    This function can be called on public keys supplied from untrusted sources which could allow an attacker     to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but     applications might call the function if there are additional security requirements imposed by standards     such as FIPS 140-3. (CVE-2023-0217)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. (CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2023-0946 advisory.

    - Fixed X.509 Name Constraints Read Buffer Overflow       Resolves: CVE-2022-4203
    - Fixed Timing Oracle in RSA Decryption       Resolves: CVE-2022-4304
    - Fixed Double free after calling PEM_read_bio_ex       Resolves: CVE-2022-4450
    - Fixed Use-after-free following BIO_new_NDEF       Resolves: CVE-2023-0215
    - Fixed Invalid pointer dereference in d2i_PKCS7 functions       Resolves: CVE-2023-0216
    - Fixed NULL dereference validating DSA public key       Resolves: CVE-2023-0217
    - Fixed X.400 address type confusion in X.509 GeneralName       Resolves: CVE-2023-0286
    - Fixed NULL dereference during PKCS7 data verification       Resolves: CVE-2023-0401

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2023:0946 advisory.

    OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS)     protocols, as well as a full-strength general-purpose cryptography library.

    Security Fix(es):

    * openssl: X.400 address type confusion in X.509 GeneralName (CVE-2023-0286)

    * openssl: read buffer overflow in X.509 certificate verification (CVE-2022-4203)

    * openssl: timing attack in RSA Decryption implementation (CVE-2022-4304)

    * openssl: double free after calling PEM_read_bio_ex (CVE-2022-4450)

    * openssl: use-after-free following BIO_new_NDEF (CVE-2023-0215)

    * openssl: invalid pointer dereference in d2i_PKCS7 functions (CVE-2023-0216)

    * openssl: NULL dereference validating DSA public key (CVE-2023-0217)

    * openssl: NULL dereference during PKCS7 data verification (CVE-2023-0401)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Bug Fix(es):

    * HMAC generation should reject key lengths < 112 bits or provide an indicator in FIPS mode (BZ#2144000)

    * In FIPS mode, openssl should set a minimum length for passwords in PBKDF2 (BZ#2144003)

    * stunnel consumes high amount of memory when pestered with TCP connections without a TLS handshake     (BZ#2144008)

    * In FIPS mode, openssl should reject SHAKE as digest for RSA-OAEP or provide an indicator (BZ#2144010)

    * In FIPS mode, openssl should reject RSASSA-PSS salt lengths larger than the output size of the hash     function used, or provide an indicator (BZ#2144012)

    * In FIPS mode, openssl should reject RSA signatures with X9.31 padding, or provide an indicator     (BZ#2144015)

    * In FIPS mode, openssl should reject SHA-224, SHA-384, SHA-512-224, and SHA-512-256 as hashes for hash-     based DRBGs, or provide an indicator after 2023-05-16 (BZ#2144017)

    * In FIPS mode, openssl should reject KDF input and output key lengths < 112 bits or provide an indicator     (BZ#2144019)

    * In FIPS mode, openssl should reject RSA keys < 2048 bits when using EVP_PKEY_decapsulate, or provide an     indicator (BZ#2145170)

    * RHEL9.1 Nightly[0912] - error:03000093:digital envelope routines::command not supported when git clone     is run with configured ibmca engine backed by libica.so.4 (OpenSSL 3.0) (BZ#2149010)

    * OpenSSL FIPS checksum code needs update (BZ#2158412)

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Fedora 36 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2023-a5564c0a3f advisory.

    Rebase to upstream version 3.0.8     Resolves: CVE-2022-4203     Resolves: CVE-2022-4304     Resolves: CVE-2022-4450     Resolves: CVE-2023-0215     Resolves: CVE-2023-0216     Resolves: CVE-2023-0217     Resolves: CVE-2023-0286     Resolves: CVE-2023-0401

Tenable has extracted the preceding description block directly from the Fedora security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Fedora 37 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2023-57f33242bc advisory.

    Rebase to upstream version 3.0.8     Resolves: CVE-2022-4203     Resolves: CVE-2022-4304     Resolves: CVE-2022-4450     Resolves: CVE-2023-0215     Resolves: CVE-2023-0216     Resolves: CVE-2023-0217     Resolves: CVE-2023-0286     Resolves: CVE-2023-0401

Tenable has extracted the preceding description block directly from the Fedora security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:0312-1 advisory.

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    (CVE-2023-0216)

  - An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA     public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash.
    This function can be called on public keys supplied from untrusted sources which could allow an attacker     to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but     applications might call the function if there are additional security requirements imposed by standards     such as FIPS 140-3. (CVE-2023-0217)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. (CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the 648a432c-a71f-11ed-86e9-d4c9ef517024 advisory.

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.8 (Affected     since 3.0.0). (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. Fixed in OpenSSL 1.0.2zg (Affected since     1.0.2). (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. Fixed in OpenSSL 3.0.8 (Affected since     3.0.0). (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. Thanks to Octavio Galland (Max Planck     Institute for Security and Privacy). Thanks to Marcel Bhme (Max Planck Institute for Security and     Privacy). Fix developed by Viktor Dukhovni. Fix developed by Matt Caswell. Fixed in OpenSSL 1.1.1t     (Affected since 1.1.1). (CVE-2023-0215)

  - An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7     data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is     an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL     does not call this function however third party applications might call these functions on untrusted data.
    Thanks to Marc Schnefeld. Fix developed by Tom Mrz. Fixed in OpenSSL 3.0.8 (Affected since 3.0.0).
    (CVE-2023-0216)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. Thanks to David Benjamin (Google). Fix     developed by Hugo Landau. Fixed in OpenSSL 1.1.1t (Affected since 1.1.1). (CVE-2023-0286)

  - A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or     signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library     but the implementation of the hash algorithm is not available the digest initialization will fail. There     is a missing check for the return value from the initialization function which later leads to invalid     usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused     by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider.
    PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS     implementation in OpenSSL does not call these functions however third party applications would be affected     if they call these functions to verify signatures on untrusted data. Thanks to Hubert Kario (Red Hat).
    Thanks to Dmitry Belyavsky (Red Hat). Fix developed by Tom Mrz. Fixed in OpenSSL 3.0.8 (Affected since     3.0.0). (CVE-2023-0401)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Ubuntu 18.04 LTS / 20.04 LTS / 22.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-5844-1 advisory.

    David Benjamin discovered that OpenSSL incorrectly handled X.400 address processing. A remote attacker     could possibly use this issue to read arbitrary memory contents or cause OpenSSL to crash, resulting in a     denial of service. (CVE-2023-0286)

    Corey Bonnell discovered that OpenSSL incorrectly handled X.509 certificate verification. A remote     attacker could possibly use this issue to cause OpenSSL to crash, resulting in a denial of service. This     issue only affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2022-4203)

    Hubert Kario discovered that OpenSSL had a timing based side channel in the OpenSSL RSA Decryption     implementation. A remote attacker could possibly use this issue to recover sensitive information.
    (CVE-2022-4304)

    Dawei Wang discovered that OpenSSL incorrectly handled parsing certain PEM data. A remote attacker could     possibly use this issue to cause OpenSSL to crash, resulting in a denial of service. (CVE-2022-4450)

    Octavio Galland and Marcel Bhme discovered that OpenSSL incorrectly handled streaming ASN.1 data. A     remote attacker could use this issue to cause OpenSSL to crash, resulting in a denial of service, or     possibly execute arbitrary code. (CVE-2023-0215)

    Marc Schnefeld discovered that OpenSSL incorrectly handled malformed PKCS7 data. A remote attacker could     possibly use this issue to cause OpenSSL to crash, resulting in a denial of service. This issue only     affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2023-0216)

    Kurt Roeckx discovered that OpenSSL incorrectly handled validating certain DSA public keys. A remote     attacker could possibly use this issue to cause OpenSSL to crash, resulting in a denial of service. This     issue only affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2023-0217)

    Hubert Kario and Dmitry Belyavsky discovered that OpenSSL incorrectly validated certain signatures. A     remote attacker could possibly use this issue to cause OpenSSL to crash, resulting in a denial of service.
    This issue only affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2023-0401)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of OpenSSL installed on the remote host is prior to 3.0.8. It is, therefore, affected by a denial of service (DoS) vulnerability. If an X.509 certificate contains a malformed policy constraint and policy processing is enabled, then a write lock will be taken twice recursively. On some operating systems (most widely: Windows) this results in a denial of service when the affected process hangs. Policy processing being enabled on a publicly facing server is not considered to be a common setup. Policy processing is enabled by passing the -policy argument to the command line utilities or by calling either X509_VERIFY_PARAM_add0_policy() or X509_VERIFY_PARAM_set1_policies() functions.

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - If an X.509 certificate contains a malformed policy constraint and policy processing is enabled, then a     write lock will be taken twice recursively. On some operating systems (most widely: Windows) this results     in a denial of service when the affected process hangs. Policy processing being enabled on a publicly     facing server is not considered to be a common setup. Policy processing is enabled by passing the

    `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()'     function. Update (31 March 2023): The description of the policy processing enablement was corrected based     on CVE-2023-0466. (CVE-2022-3996)

  - A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint     checking. Note that this occurs after certificate chain signature verification and requires either a CA to     have signed the malicious certificate or for the application to continue certificate verification despite     failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which     could lead to a denial of service attack. In theory it could also result in the disclosure of private     memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working     exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client,     this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the     server requests client authentication and a malicious client connects. (CVE-2022-4203)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
210337	Oracle Business Intelligence Enterprise Edition (OAS 7.6) (October 2024 CPU)	Nessus	Misc.	critical
210336	Oracle Business Intelligence Enterprise Edition (October 2024 CPU)	Nessus	Misc.	critical
203609	Photon OS 4.0: Nodejs PHSA-2023-4.0-0415	Nessus	PhotonOS Local Security Checks	high
203335	Photon OS 4.0: Openssl PHSA-2023-4.0-0330	Nessus	PhotonOS Local Security Checks	high
193921	CentOS 9 : openssl-3.0.7-18.el9	Nessus	CentOS Local Security Checks	critical
191429	Siemens SINEC NMS < V2.0 SP1 Multiple Vulnerabilities	Nessus	Windows	critical
189977	GLSA-202402-08 : OpenSSL: Multiple Vulnerabilities	Nessus	Gentoo Local Security Checks	high
501876	Siemens SCALANCE OpenSSL NULL Pointer Dereference (CVE-2023-0401)	Tenable OT Security	Tenable.ot	high
187613	Ubuntu 22.04 LTS : Node.js vulnerabilities (USN-6564-1)	Nessus	Ubuntu Local Security Checks	critical
175428	Nessus Network Monitor < 6.2.1 Multiple Vulnerabilities (TNS-2023-19)	Nessus	Misc.	critical
173651	Rocky Linux 9 : openssl (RLSA-2023:0946)	Nessus	Rocky Linux Local Security Checks	high
173183	Amazon Linux 2023 : openssl, openssl-devel, openssl-libs (ALAS2023-2023-101)	Nessus	Amazon Linux Local Security Checks	critical
172636	Tenable Nessus Agent 10.x >= 10.2.1 and < 10.3.2 Multiple Vulnerabilities (TNS-2023-12)	Nessus	Misc.	medium
172543	RHEL 9 : openssl (RHSA-2023:1199)	Nessus	Red Hat Local Security Checks	critical
172276	Tenable Nessus 10.x >= 10.2.1 and < 10.4.3 Multiple Vulnerabilities (TNS-2023-11)	Nessus	Misc.	medium
172140	Tenable SecurityCenter 6.0.0 Multiple Vulnerabilities (TNS-2023-07)	Nessus	Misc.	medium
172124	Tenable Nessus <= 10.4.2 Multiple Vulnerabilities (TNS-2023-09)	Nessus	Misc.	high
172035	Oracle Linux 9 : openssl (ELSA-2023-12152)	Nessus	Oracle Linux Local Security Checks	critical
172008	AlmaLinux 9 : openssl (ALSA-2023:0946)	Nessus	Alma Linux Local Security Checks	high
171997	Oracle Linux 9 : openssl (ELSA-2023-0946)	Nessus	Oracle Linux Local Security Checks	critical
171973	RHEL 9 : openssl (RHSA-2023:0946)	Nessus	Red Hat Local Security Checks	critical
171772	Fedora 36 : openssl (2023-a5564c0a3f)	Nessus	Fedora Local Security Checks	critical
171372	Fedora 37 : openssl (2023-57f33242bc)	Nessus	Fedora Local Security Checks	critical
171127	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : openssl-3 (SUSE-SU-2023:0312-1)	Nessus	SuSE Local Security Checks	high
171122	FreeBSD : OpenSSL -- Multiple vulnerabilities (648a432c-a71f-11ed-86e9-d4c9ef517024)	Nessus	FreeBSD Local Security Checks	high
171090	Ubuntu 18.04 LTS / 20.04 LTS / 22.04 LTS : OpenSSL vulnerabilities (USN-5844-1)	Nessus	Ubuntu Local Security Checks	critical
168829	OpenSSL 3.0.0 < 3.0.8 Multiple Vulnerabilities	Nessus	Web Servers	high

Detections

Analytics

CVE-2023-0401

critical

Tenable Plugins

critical

critical

high

high

critical

critical

high

high

critical

critical

high

critical

medium

critical

medium

medium

high

critical

high

critical

critical

critical

critical

high

high

critical

high