The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute, and VolumeName correctly reports the \??\ prefix as a volume name. UPDATE: Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the volume name in Windows paths starting with \?, resulting in filepath.Clean(\?\c:) returning \?\c: rather than \?\c:\ (among other effects). The previous behavior has been restored.

The remote host is affected by the vulnerability described in GLSA-202408-07 (Go: Multiple Vulnerabilities)

    Multiple vulnerabilities have been discovered in Go. Please review the CVE identifiers referenced below     for details.

Tenable has extracted the preceding description block directly from the Gentoo Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

An update of the go package has been released.

The version of golang installed on the remote host is prior to 1.20.12-1. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2024-2388 advisory.

  - A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response     body to read many more bytes from the network than are in the body. A malicious HTTP client can further     exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a     handler fails to read the entire body of a request. Chunk extensions are a little-used HTTP feature which     permit including additional metadata in a request or response body sent using the chunked encoding. The     net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large     metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real     body to encoded bytes grows too small. (CVE-2023-39326)

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. UPDATE: Go 1.20.11 and Go 1.21.4     inadvertently changed the definition of the volume name in Windows paths starting with \?, resulting in     filepath.Clean(\?\c:) returning \?\c: rather than \?\c:\ (among other effects). The previous behavior has     been restored. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of golang installed on the remote host is prior to 1.20.12-1.49. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS-2024-1903 advisory.

  - A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response     body to read many more bytes from the network than are in the body. A malicious HTTP client can further     exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a     handler fails to read the entire body of a request. Chunk extensions are a little-used HTTP feature which     permit including additional metadata in a request or response body sent using the chunked encoding. The     net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large     metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real     body to encoded bytes grows too small. (CVE-2023-39326)

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. UPDATE: Go 1.20.11 and Go 1.21.4     inadvertently changed the definition of the volume name in Windows paths starting with \?, resulting in     filepath.Clean(\?\c:) returning \?\c: rather than \?\c:\ (among other effects). The previous behavior has     been restored. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2024-477 advisory.

  - A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response     body to read many more bytes from the network than are in the body. A malicious HTTP client can further     exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a     handler fails to read the entire body of a request. Chunk extensions are a little-used HTTP feature which     permit including additional metadata in a request or response body sent using the chunked encoding. The     net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large     metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real     body to encoded bytes grows too small. (CVE-2023-39326)

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. UPDATE: Go 1.20.11 and Go 1.21.4     inadvertently changed the definition of the volume name in Windows paths starting with \?, resulting in     filepath.Clean(\?\c:) returning \?\c: rather than \?\c:\ (among other effects). The previous behavior has     been restored. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:4472-1 advisory.

  - Line directives (//line) can be used to bypass the restrictions on //go:cgo_ directives, allowing     blocked linker and compiler flags to be passed during compilation. This can result in unexpected execution     of arbitrary code when running go build. The line directive requires the absolute path of the file in     which the directive lives, which makes exploiting this issue significantly more complex. (CVE-2023-39323)

  - A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive     server resource consumption. While the total number of requests is bounded by the     http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create     a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound     the number of simultaneously executing handler goroutines to the stream concurrency limit     (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client     has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows     too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2     for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per     HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the     Server.MaxConcurrentStreams setting and the ConfigureServer function. (CVE-2023-39325)

  - The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation     can reset many streams quickly, as exploited in the wild in August through October 2023. (CVE-2023-44487)

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:4470-1 advisory.

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:4471-1 advisory.

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLED15 / SLED_SAP15 / SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:4469-1 advisory.

  - The html/template package does not properly handle HTML-like  comment tokens, nor hashbang #! comment     tokens, in <script> contexts. This may cause the template parser to improperly interpret the contents of     <script> contexts, causing actions to be improperly escaped. This may be leveraged to perform an XSS     attack. (CVE-2023-39318)

  - The html/template package does not apply the proper rules for handling occurrences of <script, <!--,     and </script within JS literals in <script> contexts. This may cause the template parser to improperly     consider script contexts to be terminated early, causing actions to be improperly escaped. This could be     leveraged to perform an XSS attack. (CVE-2023-39319)

  - The go.mod toolchain directive, introduced in Go 1.21, can be leveraged to execute scripts and binaries     relative to the root of the module when the go command was executed within the module. This applies to     modules downloaded using the go command from the module proxy, as well as modules downloaded directly     using VCS software. (CVE-2023-39320)

  - Processing an incomplete post-handshake message for a QUIC connection can cause a panic. (CVE-2023-39321)

  - QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake     messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now     consistently reject messages larger than 65KiB in size. (CVE-2023-39322)

  - Line directives (//line) can be used to bypass the restrictions on //go:cgo_ directives, allowing     blocked linker and compiler flags to be passed during compilation. This can result in unexpected execution     of arbitrary code when running go build. The line directive requires the absolute path of the file in     which the directive lives, which makes exploiting this issue significantly more complex. (CVE-2023-39323)

  - A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive     server resource consumption. While the total number of requests is bounded by the     http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create     a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound     the number of simultaneously executing handler goroutines to the stream concurrency limit     (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client     has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows     too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2     for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per     HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the     Server.MaxConcurrentStreams setting and the ConfigureServer function. (CVE-2023-39325)

  - The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation     can reset many streams quickly, as exploited in the wild in August through October 2023. (CVE-2023-44487)

  - The filepath package does not recognize paths with a \??\ prefix as special. On Windows, a path beginning     with \??\ is a Root Local Device path equivalent to a path beginning with \\?\. Paths with a \??\ prefix     may be used to access arbitrary locations on the system. For example, the path \??\c:\x is equivalent to     the more common path c:\x. Before fix, Clean could convert a rooted path such as \a\..\??\b into the root     local device path \??\b. Clean will now convert this to .\??\b. Similarly, Join(\, ??, b) could convert a     seemingly innocent sequence of path elements into the root local device path \??\b. Join will now convert     this to \.\??\b. In addition, with fix, IsAbs now correctly reports paths beginning with \??\ as absolute,     and VolumeName correctly reports the \??\ prefix as a volume name. (CVE-2023-45283)

  - On Windows, The IsLocal function does not correctly detect reserved device names in some cases. Reserved     names followed by spaces, such as COM1 , and reserved names COM and LPT followed by superscript 1,     2, or 3, are incorrectly reported as local. With fix, IsLocal now correctly reports these names as non-     local. (CVE-2023-45284)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
205144	GLSA-202408-07 : Go: Multiple Vulnerabilities	Nessus	Gentoo Local Security Checks	critical
204491	Photon OS 4.0: Go PHSA-2023-4.0-0531	Nessus	PhotonOS Local Security Checks	high
204248	Photon OS 5.0: Go PHSA-2023-5.0-0176	Nessus	PhotonOS Local Security Checks	high
204030	Photon OS 3.0: Go PHSA-2023-3.0-0702	Nessus	PhotonOS Local Security Checks	high
187846	Amazon Linux 2 : golang (ALAS-2024-2388)	Nessus	Amazon Linux Local Security Checks	high
187711	Amazon Linux AMI : golang (ALAS-2024-1903)	Nessus	Amazon Linux Local Security Checks	high
187686	Amazon Linux 2023 : golang, golang-bin, golang-misc (ALAS2023-2024-477)	Nessus	Amazon Linux Local Security Checks	high
185945	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : go1.20-openssl (SUSE-SU-2023:4472-1)	Nessus	SuSE Local Security Checks	high
185944	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : go1.20 (SUSE-SU-2023:4470-1)	Nessus	SuSE Local Security Checks	high
185942	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : go1.21 (SUSE-SU-2023:4471-1)	Nessus	SuSE Local Security Checks	high
185941	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : go1.21-openssl (SUSE-SU-2023:4469-1)	Nessus	SuSE Local Security Checks	critical

Detections

Analytics

CVE-2023-45283

high

Tenable Plugins

critical

high

high

high

high

high

high

high

high

high

critical