This update for podman fixes the following issues :

Security issue fixed :

  - This release resolves CVE-2020-14370, in which     environment variables could be leaked between containers     created using the Varlink API (bsc#1176804).

Non-security issues fixed :

  - add dependency to timezone package or podman fails to     build a container (bsc#1178122)

  - Install new auto-update system units

  - Update to v2.1.1 (bsc#1178392) :

  - Changes

  - The `podman info` command now includes the cgroup     manager Podman is using.

  - API

  - The REST API now includes a Server header in all     responses.

  - Fixed a bug where the Libpod and Compat Attach endpoints     could terminate early, before sending all output from     the container.

  - Fixed a bug where the Compat Create endpoint for     containers did not properly handle the Interactive     parameter.

  - Fixed a bug where the Compat Kill endpoint for     containers could continue to run after a fatal error.

  - Fixed a bug where the Limit parameter of the Compat List     endpoint for Containers did not properly handle a limit     of 0 (returning nothing, instead of all containers)     [#7722].

  - The Libpod Stats endpoint for containers is being     deprecated and will be replaced by a similar endpoint     with additional features in a future release.

  - Changes in v2.1.0

  - Features

  - A new command, `podman image mount`, has been added.
    This allows for an image to be mounted, read-only, to     inspect its contents without creating a container from     it [#1433].

  - The `podman save` and `podman load` commands can now     create and load archives containing multiple images     [#2669].

  - Rootless Podman now supports all `podman network`     commands, and rootless containers can now be joined to     networks.

  - The performance of `podman build` on `ADD` and `COPY`     instructions has been greatly improved, especially when     a `.dockerignore` is present.

  - The `podman run` and `podman create` commands now     support a new mode for the `--cgroups` option,     `--cgroups=split`. Podman will create two cgroups under     the cgroup it was launched in, one for the container and     one for Conmon. This mode is useful for running Podman     in a systemd unit, as it ensures that all processes are     retained in systemd's cgroup hierarchy [#6400].

  - The `podman run` and `podman create` commands can now     specify options to slirp4netns by using the `--network`     option as follows: `--net slirp4netns:opt1,opt2`. This     allows for, among other things, switching the port     forwarder used by slirp4netns away from rootlessport.

  - The `podman ps` command now features a new option,     `--storage`, to show containers from Buildah, CRI-O and     other applications.

  - The `podman run` and `podman create` commands now     feature a `--sdnotify` option to control the behavior of     systemd's sdnotify with containers, enabling improved     support for Podman in `Type=notify` units.

  - The `podman run` command now features a `--preserve-fds`     opton to pass file descriptors from the host into the     container [#6458].

  - The `podman run` and `podman create` commands can now     create overlay volume mounts, by adding the `:O` option     to a bind mount (e.g. `-v /test:/test:O`). Overlay     volume mounts will mount a directory into a container     from the host and allow changes to it, but not write     those changes back to the directory on the host.

  - The `podman play kube` command now supports the Socket     HostPath type [#7112].

  - The `podman play kube` command now supports read-only     mounts.

  - The `podman play kube` command now supports setting     labels on pods from Kubernetes metadata labels.

  - The `podman play kube` command now supports setting     container restart policy [#7656].

  - The `podman play kube` command now properly handles     `HostAlias` entries.

  - The `podman generate kube` command now adds entries to     `/etc/hosts` from `--host-add` generated YAML as     `HostAlias` entries.

  - The `podman play kube` and `podman generate kube`     commands now properly support `shareProcessNamespace` to     share the PID namespace in pods.

  - The `podman volume ls` command now supports the     `dangling` filter to identify volumes that are dangling     (not attached to any container).

  - The `podman run` and `podman create` commands now     feature a `--umask` option to set the umask of the     created container.

  - The `podman create` and `podman run` commands now     feature a `--tz` option to set the timezone within the     container [#5128].

  - Environment variables for Podman can now be added in the     `containers.conf` configuration file.

  - The `--mount` option of `podman run` and `podman create`     now supports a new mount type, `type=devpts`, to add a     `devpts` mount to the container. This is useful for     containers that want to mount `/dev/` from the host into     the container, but still create a terminal.

  - The `--security-opt` flag to `podman run` and `podman     create` now supports a new option, `proc-opts`, to     specify options for the container's `/proc` filesystem.

  - Podman with the `crun` OCI runtime now supports a new     option to `podman run` and `podman create`,     `--cgroup-conf`, which allows for advanced configuration     of cgroups on cgroups v2 systems.

  - The `podman create` and `podman run` commands now     support a `--override-variant` option, to override the     architecture variant of the image that will be pulled     and ran.

  - A new global option has been added to Podman,     `--runtime-flags`, which allows for setting flags to use     when the OCI runtime is called.

  - The `podman manifest add` command now supports the     `--cert-dir`, `--auth-file`, `--creds`, and     `--tls-verify` options.

  - Security

  - This release resolves CVE-2020-14370, in which     environment variables could be leaked between containers     created using the Varlink API.

  - Changes

  - Podman will now retry pulling an image 3 times if a pull     fails due to network errors.

  - The `podman exec` command would previously print error     messages (e.g. `exec session exited with non-zero exit     code

    -1`) when the command run exited with a non-0 exit code.
    It no longer does this. The `podman exec` command will     still exit with the same exit code as the command run in     the container did.

  - Error messages when creating a container or pod with a     name that is already in use have been improved.

  - For read-only containers running systemd init, Podman     creates a tmpfs filesystem at `/run`. This was     previously limited to 65k in size and mounted `noexec`,     but is now unlimited size and mounted `exec`.

  - The `podman system reset` command no longer removes     configuration files for rootless Podman.

  - API

  - The Libpod API version has been bumped to v2.0.0 due to     a breaking change in the Image List API.

  - Docker-compatible Volume Endpoints (Create, Inspect,     List, Remove, Prune) are now available!

  - Added an endpoint for generating systemd unit files for     containers.

  - The `last` parameter to the Libpod container list     endpoint now has an alias, `limit` [#6413].

  - The Libpod image list API new returns timestamps in Unix     format, as integer, as opposed to as strings

  - The Compat Inspect endpoint for containers now includes     port information in NetworkSettings.

  - The Compat List endpoint for images now features limited     support for the (deprecated) `filter` query parameter     [#6797].

  - Fixed a bug where the Compat Create endpoint for     containers was not correctly handling bind mounts.

  - Fixed a bug where the Compat Create endpoint for     containers would not return a 404 when the requested     image was not present.

  - Fixed a bug where the Compat Create endpoint for     containers did not properly handle Entrypoint and     Command from images.

  - Fixed a bug where name history information was not     properly added in the Libpod Image List endpoint.

  - Fixed a bug where the Libpod image search endpoint     improperly populated the Description field of responses.

  - Added a `noTrunc` option to the Libpod image search     endpoint.

  - Fixed a bug where the Pod List API would return null,     instead of an empty array, when no pods were present     [#7392].

  - Fixed a bug where endpoints that hijacked would do     perform the hijack too early, before being ready to send     and receive data [#7195].

  - Fixed a bug where Pod endpoints that can operate on     multiple containers at once (e.g. Kill, Pause, Unpause,     Stop) would not forward errors from individual     containers that failed.

  - The Compat List endpoint for networks now supports     filtering results [#7462].

  - Fixed a bug where the Top endpoint for pods would return     both a 500 and 404 when run on a non-existent pod.

  - Fixed a bug where Pull endpoints did not stream progress     back to the client.

  - The Version endpoints (Libpod and Compat) now provide     version in a format compatible with Docker.

  - All non-hijacking responses to API requests should not     include headers with the version of the server.

  - Fixed a bug where Libpod and Compat Events endpoints did     not send response headers until the first event occurred     [#7263].

  - Fixed a bug where the Build endpoints (Compat and     Libpod) did not stream progress to the client.

  - Fixed a bug where the Stats endpoints (Compat and     Libpod) did not properly handle clients disconnecting.

  - Fixed a bug where the Ignore parameter to the Libpod     Stop endpoint was not performing properly.

  - Fixed a bug where the Compat Logs endpoint for     containers did not stream its output in the correct     format [#7196].

This update was imported from the SUSE:SLE-15-SP1:Update update project.

Detections

Analytics

openSUSE Security Update : podman (openSUSE-2020-2039)

medium Nessus Plugin ID 143335

Version 1.3