The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-5343 advisory.

  - AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt     the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was     preexisting in the memory that wasn't written. In the special case of in place encryption, sixteen bytes     of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and     DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q     (Affected 1.1.1-1.1.1p). (CVE-2022-2097)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the name (e.g.
    CERTIFICATE), any header data and the payload data. If the function succeeds then the name_out,     header and data arguments are populated with pointers to buffers containing the relevant decoded data.
    The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results     in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate     the header argument with a pointer to a buffer that has already been freed. If the caller also frees this     buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an     attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service     attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and     therefore these functions are also directly affected. These functions are also called indirectly by a     number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file()     which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the     caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations     include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL     asn1parse command line application is also impacted by this issue. (CVE-2022-4450)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Detections

Analytics

Debian DSA-5343-1 : openssl - security update

high Nessus Plugin ID 171218

Version 1.5

Version 1.4

Version 1.3

Version 1.2

Version 1.1

Version 1.0

Version 1.5 Sep 5, 2023, 4:12 PM CVSS temporal metrics ("CVSSv2 temporal vector" set to "CVSS2#E:F/RL:OF/RC:C". "CVSSv3 temporal vector" set to "CVSS:3.0/E:F/RL:O/RC:C") Exploit attributes ("Exploit available" set to "True". "Exploitability ease" changed from "No known exploits are available" to "Exploits are available") Plugin Feed: 202309051612
Version 1.4 Mar 31, 2023, 10:15 AM IAVM reference Plugin Feed: 202303311015
Version 1.3 Feb 22, 2023, 2:14 PM CVSS metrics ("CVSSv3 score" changed from "9.1" to "7.4". "CVSSv3 score" changed from "9.1" to "7.4". "CVSSv3 score" changed from "9.1" to "7.4". "CVSSv3 score" changed from "9.1" to "7.4". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H" to "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H" to "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H" to "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H") Plugin Feed: 202302221414
Version 1.2 Feb 20, 2023, 2:37 PM CVSS metrics ("CVSSv3 score" changed from "5.3" to "9.1". "CVSSv3 score" changed from "5.3" to "9.1". "CVSSv3 score" changed from "5.3" to "9.1". "CVSSv3 score" changed from "5.3" to "9.1". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N" to "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N" to "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H". "CVSSv3 vector" changed from "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N" to "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H") CVSSv3 score source (set to "CVE-2023-0286") CVSSv3 severity (based on CVE-2023-0286, severity increased from "Medium" to "High") Plugin Feed: 202302201437
Version 1.1 Feb 13, 2023, 7:01 PM IAVM reference Plugin Feed: 202302131901
Version 1.0 Feb 9, 2023, 4:31 AM New Plugin Feed: 202302090431