Detections
Analytics
EulerOS 2.0 SP10 : kernel (EulerOS-SA-2024-1887)
high Nessus Plugin ID 202411
Synopsis
The remote EulerOS host is missing multiple security updates.Description
According to the versions of the kernel packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to
-bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx.
This 'works' accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx-index_hw[hctx-type] hctx- nr_ctx).(CVE-2021-46984)
In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] IRQ [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250]
__do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] /IRQ API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_dat(CVE-2021-47077)
In the Linux kernel, the following vulnerability has been resolved: asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized.(CVE-2021-47101)
In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix use-after-free after the TLS device goes down and up When a netdev with active TLS offload goes down, tls_device_down is called to stop the offload and tear down the TLS context. However, the socket stays alive, and it still points to the TLS context, which is now deallocated. If a netdev goes up, while the connection is still active, and the data flow resumes after a number of TCP retransmissions, it will lead to a use-after-free of the TLS context. This commit addresses this bug by keeping the context alive until its normal destruction, and implements the necessary fallbacks, so that the connection can resume in software (non-offloaded) kTLS mode. On the TX side tls_sw_fallback is used to encrypt all packets. The RX side already has all the necessary fallbacks, because receiving non-decrypted packets is supported. The thing needed on the RX side is to block resync requests, which are normally produced after receiving non-decrypted packets. The necessary synchronization is implemented for a graceful teardown: first the fallbacks are deployed, then the driver resources are released (it used to be possible to have a tls_dev_resync after tls_dev_del). A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback mode. It's used to skip the RX resync logic completely, as it becomes useless, and some objects may be released (for example, resync_async, which is allocated and freed by the driver).(CVE-2021-47131)
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a use-after-free looks like we forget to set ttm-sg to NULL.(CVE-2021-47142)
In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix refcount leak [Why] the gem object rfb-base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes [How] put rfb-base.obj[0] in amdgpu_fbdev_destroy according to num_planes(CVE-2021-47144)
In the Linux kernel, the following vulnerability has been resolved:NFS: Fix an Oopsable condition in
__nfs_pageio_add_request().Ensure that nfs_pageio_error_cleanup() resets the mirror array contents,so that the structure reflects the fact that it is now empty.Also change the test in nfs_pageio_do_add_request() to be more robust by checking whether or not the list is empty rather than relying on the value of pg_count.(CVE-2021-47167)
In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel;
it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.(CVE-2021-47170)
In the Linux kernel, the following vulnerability has been resolved: net: usb: fix memory leak in smsc75xx_bind Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation.(CVE-2021-47171)
In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix scsi_mode_sense() buffer length handling Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev-use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev-use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was.(CVE-2021-47182)
In the Linux kernel, the following vulnerability has been resolved: tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace:
dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it.(CVE-2021-47185)
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local 'fail_msg' string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since 'fail_msg' remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure.(CVE-2021-47203)
In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p = GENMASK((cell-nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54
__ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304
__driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out.(CVE-2021-47497)
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote(CVE-2022-48697)
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU) races when it races with itself. hidpp_connect_event() primarily runs from a workqueue but it also runs on probe() and if a 'device-connected' packet is received by the hw when the thread running hidpp_connect_event() from probe() is waiting on the hw, then a second thread running hidpp_connect_event() will be started from the workqueue. This opens the following races (note the below code is simplified): 1. Retrieving + printing the protocol (harmless race): if (!hidpp-protocol_major) { hidpp_root_get_protocol_version() hidpp-protocol_major = response.rap.params[0]; } We can actually see this race hit in the dmesg in the abrt output attached to rhbz#2227968: [ 3064.624215] logitech-hidpp- device 0003:046D:4071.0049: HID++ 4.5 device connected. [ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. Testing with extra logging added has shown that after this the 2 threads take turn grabbing the hw access mutex (send_mutex) so they ping-pong through all the other TOCTOU cases managing to hit all of them: 2. Updating the name to the HIDPP name (harmless race): if (hidpp-name == hdev-name) { ... hidpp-name = new_name; } 3. Initializing the power_supply class for the battery (problematic!): hidpp_initialize_battery() { if (hidpp-battery.ps) return 0;
probe_battery(); /* Blocks, threads take turns executing this */ hidpp-battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp-battery.ps = devm_power_supply_register(hidpp-hid_dev-dev, hidpp-battery.desc, cfg); } 4. Creating delayed input_device (potentially problematic): if (hidpp-delayed_input) return; hidpp-delayed_input = hidpp_allocate_input(hdev); The really big problem here is 3. Hitting the race leads to the following sequence: hidpp-battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp-battery.ps = devm_power_supply_register(hidpp-hid_dev-dev, hidpp-battery.desc, cfg); ... hidpp-battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp-battery.ps = devm_power_supply_register(hidpp-hid_dev-dev, hidpp-battery.desc, cfg); So now we have registered 2 power supplies for the same battery, which looks a bit weird from userspace's pov but this is not even the really big problem. Notice how: 1. This is all devm-maganaged 2.
The hidpp-battery.desc struct is shared between the 2 power supplies 3. hidpp- battery.desc.properties points to the result from the second devm_kmemdup() This causes a use after free scenario on USB disconnect of the receiver: 1. The last registered power supply class device gets unregistered 2. The memory from the last devm_kmemdup() call gets freed, hidpp-battery.desc.properties now points to freed memory 3. The first registered power supply class device gets unregistered, this involves sending a remove uevent to userspace which invokes power_supply_uevent() to fill the uevent data 4. power_supply_uevent() uses hidpp-battery.desc.properties which now points to freed memory leading to backtraces like this one: Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address:
ffffb2140e017f08 ... Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0 ... Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0 Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0 Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680 Sep 22 20:01:35 eric kernel:
---truncated---(CVE-2023-52478)
In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned.(CVE-2023-52515)
In the Linux kernel, the following vulnerability has been resolved: IB/ipoib: Fix mcast list locking Releasing the `priv-lock` while iterating the `priv-multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup(CVE-2023-52587)
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix setting of fpc register kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space / host process fpc register value, however it will be discarded, when returning to user space. In result the host process will incorrectly continue to run with the value that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before the SIE context is entered which will handles invalid values. This results in a change of behaviour: invalid values will now be accepted instead of that the ioctl fails with -EINVAL. This seems to be acceptable, given that this interface is most likely not used anymore, and this is in addition the same behaviour implemented with the memory mapped interface (replace invalid values with zero) - see sync_regs() in kvm-s390.c.(CVE-2023-52597)
In the Linux kernel, the following vulnerability has been resolved:crypto: scomp - fix req-dst buffer overflow.The req-dst buffer size should be checked before copying from the scomp_scratch-dst to avoid req-dst buffer overflow problem.(CVE-2023-52612)
In the Linux kernel, the following vulnerability has been resolved: hwrng: core - Fix page fault dead lock on mmap-ed hwrng There is a dead-lock in the hwrng device read path. This triggers when the user reads from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user.(CVE-2023-52615)
In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Fix crash when setting number of cpus to an odd number When the number of cpu cores is adjusted to 7 or other odd numbers, the zone size will become an odd number. The address of the zone will become: addr of zone0 = BASE addr of zone1 = BASE + zone_size addr of zone2 = BASE + zone_size*2 ... The address of zone1/3/5/7 will be mapped to non-alignment va. Eventually crashes will occur when accessing these va. So, use ALIGN_DOWN() to make sure the zone size is even to avoid this bug.(CVE-2023-52619)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow timeout for anonymous sets Never used from userspace, disallow these parameters.(CVE-2023-52620)
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4
-F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered:
================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: TASK
__kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE MAX_ORDER) / sizeof(struct ext4_new_group_data) 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed.(CVE-2023-52622)
Integer Overflow or Wraparound vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (md, raid, raid5 modules) allows Forced Integer Overflow.(CVE-2024-23307)
A race condition was found in the Linux kernel's scsi device driver in lpfc_unregister_fcf_rescan() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.(CVE-2024-24855)
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt.(CVE-2024-26598)
In the Linux kernel, the following vulnerability has been resolved: tcp: make sure init the accept_queue's spinlocks once When I run syz's reproduction C program locally, it causes the following issue:
pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!(CVE-2024-26614)
In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim() syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken.
Reading frag_off can only be done if we pulled enough bytes to skb-head. Currently we might access garbage.(CVE-2024-26633)
In the Linux kernel, the following vulnerability has been resolved: llc: Drop support for ETH_P_TR_802_2.
syzbot reported an uninit-value bug below. [0] llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2 (0x0011), and syzbot abused the latter to trigger the bug. write$tun(r0, (0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', '90e5dd'}}}}, 0x16) llc_conn_handler() initialises local variables {saddr,daddr}.mac based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes them to __llc_lookup(). However, the initialisation is done only when skb-protocol is htons(ETH_P_802_2), otherwise, __llc_lookup_established() and
__llc_lookup_listener() will read garbage. The missing initialisation existed prior to commit 211ed865108e ('net: delete all instances of special processing for token ring'). It removed the part to kick out the token ring stuff but forgot to close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv().
Let's remove llc_tr_packet_type and complete the deprecation.(CVE-2024-26635)
In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity checks to rx zerocopy TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page-mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap((0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, (0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, (0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, (0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, (0x7f00000001c0)={(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, (0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, (0x7f00000000c0)='./file0\x00', 0x181e42, 0x0)(CVE-2024-26640)
In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb- head.(CVE-2024-26641)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow anonymous set with timeout flag Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.(CVE-2024-26642)
In the Linux kernel, the following vulnerability has been resolved: tracing: Ensure visibility when inserting an element into tracing_map Running the following two commands in parallel on a multi-processor AArch64 machine can sporadically produce an unexpected warning about duplicate histogram entries: $ while true; do echo hist:key=id.syscall:val=hitcount \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist sleep 0.001 done $ stress-ng --sysbadaddr $(nproc)(CVE-2024-26645)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around.
This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit.(CVE-2024-26668)
In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter.
However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted.(CVE-2024-26671)
In the Linux kernel, the following vulnerability has been resolved: ppp_async: limit MRU to 64K syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ('ppp: limit MRU to 64K') Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)(CVE-2024-26675)
In the Linux kernel, the following vulnerability has been resolved: inet: read sk-sk_family once in inet_recv_error() inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning.(CVE-2024-26679)
In the Linux kernel, the following vulnerability has been resolved: fs/proc: do_task_stat: use sig- stats_lock to gather the threads/children stats lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig-stats_lock to gather the statistics outside of -siglock protected section, in the likely case this code will run lockless.(CVE-2024-26686)
In the Linux kernel, the following vulnerability has been resolved: ext4: fix double-free of blocks due to wrong extents moved_len In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ('ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT')), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue.(CVE-2024-26704)
In the Linux kernel, the following vulnerability has been resolved: mm/writeback: fix possible divide-by- zero in wb_dirty_limits(), again (struct dirty_throttle_control *)-thresh is an unsigned long, but is passed as the u32 divisor argument to div_u64(). On architectures where unsigned long is 64 bytes, the argument will be implicitly truncated. Use div64_u64() instead of div_u64() so that the value used in the 'is this a safe division' check is the same as the divisor. Also, remove redundant cast of the numerator to u64, as that should happen implicitly. This would be difficult to exploit in memcg domain, given the ratio-based arithmetic domain_drity_limits() uses, but is much easier in global writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g. vm.dirty_bytes=(132)*PAGE_SIZE so that dtc-thresh == (132)(CVE-2024-26720)
In the Linux kernel, the following vulnerability has been resolved: arp: Prevent overflow in arp_req_get(). syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh-ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev-addr_len is greater than 22 (e.g.
MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy().(CVE-2024-26733)
In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.(CVE-2024-26735)
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: don't override retval if we already lost the skb If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it.(CVE-2024-26739)
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 ('act_mirred: use the backlog for nested calls to mirred ingress') hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv - tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress - ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress - ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue.(CVE-2024-26740)
In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix qedr_create_user_qp error flow Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail.(CVE-2024-26743)
In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Support specifying the srpt_service_guid parameter Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000(CVE-2024-26744)
In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption.(CVE-2024-26759)
In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time.(CVE-2024-26763)
In the Linux kernel, the following vulnerability has been resolved: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio.(CVE-2024-26764)
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Places the logic for checking if the group's block bitmap is corrupt under the protection of the group lock to avoid allocating blocks from the group with a corrupted block bitmap.(CVE-2024-26772)
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Determine if the group block bitmap is corrupted before using ac_b_ex in ext4_mb_try_best_found() to avoid allocating blocks from a group with a corrupted block bitmap in the following concurrency and making the situation worse. ext4_mb_regular_allocator ext4_lock_group(sb, group) ext4_mb_good_group // check if the group bbitmap is corrupted ext4_mb_complex_scan_group // Scan group gets ac_b_ex but doesn't use it ext4_unlock_group(sb, group) ext4_mark_group_bitmap_corrupted(group) // The block bitmap was corrupted during // the group unlock gap. ext4_mb_try_best_found ext4_lock_group(ac-ac_sb, group) ext4_mb_use_best_found mb_mark_used // Allocating blocks in block bitmap corrupted group(CVE-2024-26773)
In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: prevent perpetual headroom growth syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in
__skb_flow_dissect+0x19d1/0x7a50(CVE-2024-26804)
In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after- free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]:
netlink_to_full_skb() creates a new `skb` and puts the `skb-data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data().
This `len` is based on `skb-end` that is not data offset but buffer offset. The `skb-end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb-end` to `skb-len`, which is the actual data offset.(CVE-2024-26805)
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl.
Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows.(CVE-2024-26810)
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd.
Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks.(CVE-2024-26812)
In the Linux kernel, the following vulnerability has been resolved: vfio/platform: Create persistent IRQ handlers The vfio-platform SET_IRQS ioctl currently allows loopback triggering of an interrupt before a signaling eventfd has been configured by the user, which thereby allows a NULL pointer dereference. Rather than register the IRQ relative to a valid trigger, register all IRQs in a disabled state in the device open path. This allows mask operations on the IRQ to nest within the overall enable state governed by a valid eventfd signal. This decouples @masked, protected by the @locked spinlock from @trigger, protected via the @igate mutex. In doing so, it's guaranteed that changes to @trigger cannot race the IRQ handlers because the IRQ handler is synchronously disabled before modifying the trigger, and loopback triggering of the IRQ via ioctl is safe due to serialization with trigger changes via igate. For compatibility, request_irq() failures are maintained to be local to the SET_IRQS ioctl rather than a fatal error in the open device path. This allows, for example, a userspace driver with polling mode support to continue to work regardless of moving the request_irq() call site. This necessarily blocks all SET_IRQS access to the failed index.(CVE-2024-26813)
In the Linux kernel, the following vulnerability has been resolved: cifs: fix underflow in parse_server_interfaces() In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that 'bytes_left' is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending.(CVE-2024-26828)
In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix memory leak in cachefiles_add_cache()(CVE-2024-26840)
In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core.(CVE-2024-26845)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type.(CVE-2024-26851)
In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ('ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()') We have to save skb- network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb- head.(CVE-2024-26857)
In the Linux kernel, the following vulnerability has been resolved: net/bnx2x: Prevent access to a freed page in page_pool Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs.(CVE-2024-26859)
In the Linux kernel, the following vulnerability has been resolved: rds: tcp: Fix use-after-free of net in reqsk_timer_handler(). syzkaller reported a warning of netns tracker [0] followed by KASAN splat [1] and another ref tracker warning [1]. syzkaller could not find a repro, but in the log, the only suspicious sequence was as follows: 18:26:22 executing program 1: r0 = socket$inet6_mptcp(0xa, 0x1, 0x106) ...
connect$inet6(r0, (0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async) The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT.(CVE-2024-26865)
In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Do not register event handler until srpt device is fully setup Upon rare occasions, KASAN reports a use-after-free Write in srpt_refresh_port(). This seems to be because an event handler is registered before the srpt device is fully setup and a race condition upon error may leave a partially setup event handler in place. Instead, only register the event handler after srpt device initialization is complete.(CVE-2024-26872)
In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference Below race may cause NULL pointer dereference P1 P2 dquot_free_inode quota_off drop_dquot_ref remove_dquot_ref dquots = i_dquot(inode) dquots = i_dquot(inode) srcu_read_lock dquots[cnt]) != NULL (1) dquots[type] = NULL (2) spin_lock(dquots[cnt]-dq_dqb_lock) (3) .... If dquot_free_inode(or other routines) checks inode's quota pointers (1) before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer dereference will be triggered. So let's fix it by using a temporary pointer to avoid this issue.(CVE-2024-26878)
In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ('ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()') 1ca1ba465e55 ('geneve: make sure to pull inner header in geneve_rx()') We have to save skb-network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb-head.(CVE-2024-26882)
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup.(CVE-2024-26884)
In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit() After unregistering the CPU idle device, the memory associated with it is not freed, leading to a memory leak: unreferenced object 0xffff896282f6c000 (size 1024): comm 'swapper/0', pid 1, jiffies 4294893170 hex dump (first 32 bytes): 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 8836a742): [ffffffff993495ed] kmalloc_trace+0x29d/0x340 [ffffffff9972f3b3] acpi_processor_power_init+0xf3/0x1c0 [ffffffff9972d263] __acpi_processor_start+0xd3/0xf0 [ffffffff9972d2bc] acpi_processor_start+0x2c/0x50 [ffffffff99805872] really_probe+0xe2/0x480 [ffffffff99805c98] __driver_probe_device+0x78/0x160 [ffffffff99805daf] driver_probe_device+0x1f/0x90 [ffffffff9980601e] __driver_attach+0xce/0x1c0 [ffffffff99803170] bus_for_each_dev+0x70/0xc0 [ffffffff99804822] bus_add_driver+0x112/0x210 [ffffffff99807245] driver_register+0x55/0x100 [ffffffff9aee4acb] acpi_processor_driver_init+0x3b/0xc0 [ffffffff990012d1] do_one_initcall+0x41/0x300 [ffffffff9ae7c4b0] kernel_init_freeable+0x320/0x470 [ffffffff99b231f6] kernel_init+0x16/0x1b0 [ffffffff99042e6d] ret_from_fork+0x2d/0x50 Fix this by freeing the CPU idle device after unregistering(CVE-2024-26894)
In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak syzbot identified a kernel information leak vulnerability in do_sys_name_to_handle() and issued the following report [1]. [1] 'BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in
_copy_to_user+0xbc/0x100 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x100 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] do_sys_name_to_handle fs/fhandle.c:73 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
__se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:1020 kmalloc include/linux/slab.h:604 [inline] do_sys_name_to_handle fs/fhandle.c:39 [inline]
__do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Bytes 18-19 of 20 are uninitialized Memory access of size 20 starts at ffff888128a46380 Data copied to user address 0000000020000240' Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to solve the problem.(CVE-2024-26901)
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reset IH OVERFLOW_CLEAR bit Allows us to detect subsequent IH ring buffer overflows as well.(CVE-2024-26915)
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate the parameters of bo mapping operations more clearly Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.(CVE-2024-26922)
In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged
__skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected.(CVE-2024-26923)
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix command flush on cable pull System crash due to command failed to flush back to SCSI layer. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000(CVE-2024-26931)
In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device:
It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback.(CVE-2024-26934)
In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently(CVE-2024-26958)
In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache().(CVE-2024-26960)
In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length.(CVE-2024-26973)
In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP:
0010:kvm_put_kvm+0x2d/0x320 [kvm](CVE-2024-26976)
In the Linux kernel, the following vulnerability has been resolved: Squashfs: check the inode number is not the invalid value of zero Syskiller has produced an out of bounds access in fill_meta_index(). That out of bounds access is ultimately caused because the inode has an inode number with the invalid value of zero, which was not checked. The reason this causes the out of bounds access is due to following sequence of events: 1. Fill_meta_index() is called to allocate (via empty_meta_index()) and fill a metadata index.
It however suffers a data read error and aborts, invalidating the newly returned empty metadata index. It does this by setting the inode number of the index to zero, which means unused (zero is not a valid inode number). 2. When fill_meta_index() is subsequently called again on another read operation, locate_meta_index() returns the previous index because it matches the inode number of 0. Because this index has been returned it is expected to have been filled, and because it hasn't been, an out of bounds access is performed. This patch adds a sanity check which checks that the inode number is not zero when the inode is created and returns -EINVAL if it is.(CVE-2024-26982)
In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn-parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL.(CVE-2024-26993)
In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb-or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb-or is zero because ffs(dcb-or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-27008)
In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock.(CVE-2024-27010)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak in map from abort path The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared.
This is similar to the activate logic using the set walk iterator.(CVE-2024-27011)
In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate.(CVE-2024-27013)
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv-state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled.(CVE-2024-27014)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process.(CVE-2024-27019)
In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.(CVE-2024-27046)
In the Linux kernel, the following vulnerability has been resolved: USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands.
The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error).(CVE-2024-27059)
In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: Fix Use-After-Free in ovs_ct_exit.Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free.To prevent this, it should be changed to hlist_for_each_entry_safe.(CVE-2024-27395)
In the Linux kernel, the following vulnerability has been resolved:vfio/pci: Disable auto-enable of exclusive INTx IRQ.Currently for devices requiring masking at the irqchip for INTx, ie. devices without DisINTx support, the IRQ is enabled in request_irq() and subsequently disabled as necessary to align with the masked status flag. This presents a window where the interrupt could fire between these events, resulting in the IRQ incrementing the disable depth twice.This would be unrecoverable for a user since the masked flag prevents nested enables through vfio.Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx is never auto-enabled, then unmask as required.(CVE-2024-27437)
In the Linux kernel, the following vulnerability has been resolved:drm/client: Fully protect modes[] with dev-mode_config.mutex.The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev-mode_config.mutex.Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory.(CVE-2024-35950)
Tenable has extracted the preceding description block directly from the EulerOS kernel security advisory.
Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.
Solution
Update the affected kernel packages.See Also
Plugin Details
Severity: High
ID: 202411
File Name: EulerOS_SA-2024-1887.nasl
Version: 1.1
Type: local
Family: Huawei Local Security Checks
Published: 7/15/2024
Updated: 7/15/2024
Supported Sensors: Nessus
Risk Information
VPR
Risk Factor: High
Score: 7.4
CVSS v2
Risk Factor: Medium
Base Score: 6.8
Temporal Score: 5
Vector: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS Score Source: CVE-2024-26934
CVSS v3
Risk Factor: High
Base Score: 7.8
Temporal Score: 6.8
Vector: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Temporal Vector: CVSS:3.0/E:U/RL:O/RC:C
Vulnerability Information
CPE: p-cpe:/a:huawei:euleros:kernel-tools-libs, p-cpe:/a:huawei:euleros:kernel-tools, p-cpe:/a:huawei:euleros:python3-perf, p-cpe:/a:huawei:euleros:kernel, p-cpe:/a:huawei:euleros:kernel-abi-stablelists, cpe:/o:huawei:euleros:2.0
Required KB Items: Host/local_checks_enabled, Host/cpu, Host/EulerOS/release, Host/EulerOS/rpm-list, Host/EulerOS/sp
Excluded KB Items: Host/EulerOS/uvp_version
Exploit Ease: No known exploits are available
Patch Publication Date: 7/15/2024
Vulnerability Publication Date: 1/20/2022
Reference Information
CVE: CVE-2021-46984, CVE-2021-47077, CVE-2021-47101, CVE-2021-47131, CVE-2021-47142, CVE-2021-47144, CVE-2021-47167, CVE-2021-47170, CVE-2021-47171, CVE-2021-47182, CVE-2021-47185, CVE-2021-47203, CVE-2021-47497, CVE-2022-48697, CVE-2023-52478, CVE-2023-52515, CVE-2023-52587, CVE-2023-52597, CVE-2023-52612, CVE-2023-52615, CVE-2023-52619, CVE-2023-52620, CVE-2023-52622, CVE-2024-23307, CVE-2024-24855, CVE-2024-26598, CVE-2024-26614, CVE-2024-26633, CVE-2024-26635, CVE-2024-26640, CVE-2024-26641, CVE-2024-26642, CVE-2024-26645, CVE-2024-26668, CVE-2024-26671, CVE-2024-26675, CVE-2024-26679, CVE-2024-26686, CVE-2024-26704, CVE-2024-26720, CVE-2024-26733, CVE-2024-26735, CVE-2024-26739, CVE-2024-26740, CVE-2024-26743, CVE-2024-26744, CVE-2024-26759, CVE-2024-26763, CVE-2024-26764, CVE-2024-26772, CVE-2024-26773, CVE-2024-26804, CVE-2024-26805, CVE-2024-26810, CVE-2024-26812, CVE-2024-26813, CVE-2024-26828, CVE-2024-26840, CVE-2024-26845, CVE-2024-26851, CVE-2024-26857, CVE-2024-26859, CVE-2024-26865, CVE-2024-26872, CVE-2024-26878, CVE-2024-26882, CVE-2024-26884, CVE-2024-26894, CVE-2024-26901, CVE-2024-26915, CVE-2024-26922, CVE-2024-26923, CVE-2024-26931, CVE-2024-26934, CVE-2024-26958, CVE-2024-26960, CVE-2024-26973, CVE-2024-26976, CVE-2024-26982, CVE-2024-26993, CVE-2024-27008, CVE-2024-27010, CVE-2024-27011, CVE-2024-27013, CVE-2024-27014, CVE-2024-27019, CVE-2024-27046, CVE-2024-27059, CVE-2024-27395, CVE-2024-27437, CVE-2024-35950