Detections
Analytics

EulerOS Virtualization 2.11.0 : kernel (EulerOS-SA-2024-2205)

high Nessus Plugin ID 205964

Synopsis

The remote EulerOS Virtualization host is missing multiple security updates.

Description

According to the versions of the kernel packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

 In the Linux kernel, the following vulnerability has been resolved: IB/ipoib: Fix mcast list locking Releasing the `priv-lock` while iterating the `priv-multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup.(CVE-2023-52587)

 In the Linux kernel, the following vulnerability has been resolved: scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler Inside scsi_eh_wakeup(), scsi_host_busy() is called checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered in case that all requests are in-flight, each scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called for the last in- flight request, scsi_host_busy() has been run for (N * M - 1) times, and request has been iterated for (N*M - 1) * (N * M) times. If both N and M are big enough, hard lockup can be triggered on acquiring host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169). Fix the issue by calling scsi_host_busy() outside the host lock. We don't need the host lock for getting busy count because host the lock never covers that. [mkp: Drop unnecessary 'busy' variables pointed out by Bart](CVE-2024-26627)

 copy_params in drivers/md/dm-ioctl.c in the Linux kernel through 6.7.1 can attempt to allocate more than INT_MAX bytes, and crash, because of a missing param_kernel-data_size check. This is related to ctl_ioctl.(CVE-2024-23851)

 In the Linux kernel, the following vulnerability has been resolved: ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data() Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in
 __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800
 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself.(CVE-2023-52527)

 In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
 ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged
 __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected.(CVE-2024-26923)

 In the Linux kernel, the following vulnerability has been resolved: crypto: qat - resolve race condition during AER recovery During the PCI AER system's error recovery process, the kernel driver may encounter a race condition with freeing the reset_data structure's memory. If the device restart will take more than 10 seconds the function scheduling that restart will exit due to a timeout, and the reset_data structure will be freed. However, this data structure is used for completion notification after the restart is completed, which leads to a UAF bug.(CVE-2024-26974)

 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reset IH OVERFLOW_CLEAR bit Allows us to detect subsequent IH ring buffer overflows as well.(CVE-2024-26915)

 In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb-or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb-or is zero because ffs(dcb-or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-27008)

 In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length.(CVE-2024-26973)

 In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn-parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL.(CVE-2024-26993)

 In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd (''ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()'') We have to save skb- network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb- head.(CVE-2024-26857)

 In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP:
 0010:kvm_put_kvm+0x2d/0x320 [kvm](CVE-2024-26976)

 In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t:
 addition on 0; use-after-free.(CVE-2024-26961)

 In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after- free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |- dvb_dmxdev_init |- dvb_register_device |- dvb_dmxdev_release |- dvb_unregister_device |- dvb_remove_device |- dvb_device_put |- kref_put When calling dvb_unregister_device, dmxdev-dvbdev (i.e. *pdvbdev in dvb_register_device) could point to memory that had been freed in dvb_register_device. Thereafter, this pointer is transferred to kref_put and triggering a use-after-free.(CVE-2024-27043)

 In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations.(CVE-2024-27075)

 In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations.(CVE-2024-27073)

 In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache().(CVE-2024-26960)

 In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv-state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled.(CVE-2024-27014)

 In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock.(CVE-2024-27010)

 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak in map from abort path The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared.
 This is similar to the activate logic using the set walk iterator.(CVE-2024-27011)

 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() nft_unregister_expr() can concurrent with __nft_expr_type_get(), and there is not any protection when iterate over nf_tables_expressions list in __nft_expr_type_get().
 Therefore, there is potential data-race of nf_tables_expressions list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_expressions list in __nft_expr_type_get(), and use rcu_read_lock() in the caller nft_expr_type_get() to protect the entire type query process.(CVE-2024-27020)

 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process.(CVE-2024-27019)

 In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.(CVE-2024-27046)

 In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently(CVE-2024-26958)

 In the Linux kernel, the following vulnerability has been resolved: NTB: fix possible name leak in ntb_register_device() If device_register() fails in ntb_register_device(), the device name allocated by dev_set_name() should be freed. As per the comment in device_register(), callers should use put_device() to give up the reference in the error path. So fix this by calling put_device() in the error path so that the name can be freed in kobject_cleanup(). As a result of this, put_device() in the error path of ntb_register_device() is removed and the actual error is returned.(CVE-2023-52652)

 In the Linux kernel, the following vulnerability has been resolved: perf/core: Bail out early if the request AUX area is out of bound When perf-record with a large AUX area, e.g 4GB, it fails with: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) and it reveals a WARNING with __alloc_pages()(CVE-2023-52835)

 In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix command flush on cable pull System crash due to command failed to flush back to SCSI layer. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000(CVE-2024-26931)

 In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core.(CVE-2024-26845)

 In the Linux kernel, the following vulnerability has been resolved: Squashfs: check the inode number is not the invalid value of zero Syskiller has produced an out of bounds access in fill_meta_index(). That out of bounds access is ultimately caused because the inode has an inode number with the invalid value of zero, which was not checked. The reason this causes the out of bounds access is due to following sequence of events: 1. Fill_meta_index() is called to allocate (via empty_meta_index()) and fill a metadata index.
 It however suffers a data read error and aborts, invalidating the newly returned empty metadata index. It does this by setting the inode number of the index to zero, which means unused (zero is not a valid inode number). 2. When fill_meta_index() is subsequently called again on another read operation, locate_meta_index() returns the previous index because it matches the inode number of 0. Because this index has been returned it is expected to have been filled, and because it hasn't been, an out of bounds access is performed. This patch adds a sanity check which checks that the inode number is not zero when the inode is created and returns -EINVAL if it is.(CVE-2024-26982)

 In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate.(CVE-2024-27013)

 In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device:
 It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback.(CVE-2024-26934)

 In the Linux kernel, the following vulnerability has been resolved: USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands.
 The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error).(CVE-2024-27059)

 In the Linux kernel, the following vulnerability has been resolved:drm/client: Fully protect modes[] with dev-mode_config.mutex.The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev-mode_config.mutex.Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory.(CVE-2024-35950)

 In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: Fix Use-After-Free in ovs_ct_exit.Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free.To prevent this, it should be changed to hlist_for_each_entry_safe.(CVE-2024-27395)

 In the Linux kernel, the following vulnerability has been resolved: pstore: inode: Only d_invalidate() is needed Unloading a modular pstore backend with records in pstorefs would trigger the dput() double-drop warning: WARNING: CPU: 0 PID: 2569 at fs/dcache.c:762 dput.part.0+0x3f3/0x410 Using the combo of d_drop()/dput() (as mentioned in Documentation/filesystems/vfs.rst) isn't the right approach here, and leads to the reference counting problem seen above. Use d_invalidate() and update the code to not bother checking for error codes that can never happen.(CVE-2024-27389)

 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below:
 drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)(CVE-2024-27044)

 In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e (''init/main: add checks for the return value of memblock_alloc*()'')(CVE-2024-26988)

 In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix a use-after-free There are two .exit_cmd_priv implementations. Both implementations use resources associated with the SCSI host.
 Make sure that these resources are still available when .exit_cmd_priv is called by waiting inside scsi_remove_host() until the tag set has been freed.(CVE-2022-48666)

 In the Linux kernel, the following vulnerability has been resolved: bpf: Guard stack limits against 32bit overflow This patch promotes the arithmetic around checking stack bounds to be done in the 64-bit domain, instead of the current 32bit. The arithmetic implies adding together a 64-bit register with a int offset.
 The register was checked to be below 129 when it was variable, but not when it was fixed. The offset either comes from an instruction (in which case it is 16 bit), from another register (in which case the caller checked it to be below 129 [1]), or from the size of an argument to a kfunc (in which case it can be a u32 [2]). Between the register being inconsistently checked to be below 129, and the offset being up to an u32, it appears that we were open to overflowing the `int`s which were currently used for arithmetic.(CVE-2023-52676)

 In the Linux kernel, the following vulnerability has been resolved: cpumap: Zero-initialise xdp_rxq_info struct before running XDP program When running an XDP program that is attached to a cpumap entry, we don't initialise the xdp_rxq_info data structure being used in the xdp_buff that backs the XDP program invocation. Tobias noticed that this leads to random values being returned as the xdp_md-rx_queue_index value for XDP programs running in a cpumap. This means we're basically returning the contents of the uninitialised memory, which is bad. Fix this by zero-initialising the rxq data structure before running the XDP program.(CVE-2024-27431)

 In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize We observed a corruption during on-line resize of a file system that is larger than 16 TiB with 4k block size. With having more then 2^32 blocks resize_inode is turned off by default by mke2fs. The issue can be reproduced on a smaller file system for convenience by explicitly turning off resize_inode. An on- line resize across an 8 GiB boundary (the size of a meta block group in this setup) then leads to a corruption: dev=/dev/some_dev # should be = 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test 2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per block group and 2^6 are the number of block groups that make a meta block group. The last checksum might be different depending on how the file is laid out across the physical blocks. The actual corruption occurs at physical block 63*2^15 = 2064384 which would be the location of the backup of the meta block group's block descriptor. During the on-line resize the file system will be converted to meta_bg starting at s_first_meta_bg which is 2 in the example - meaning all block groups after 16 GiB.
 However, in ext4_flex_group_add we might add block groups that are not part of the first meta block group yet. In the reproducer we achieved this by substracting the size of a whole block group from the point where the meta block group would start. This must be considered when updating the backup block group descriptors to follow the non-meta_bg layout. The fix is to add a test whether the group to add is already part of the meta block group or not.(CVE-2024-35807)

 In the Linux kernel, the following vulnerability has been resolved: io_uring: drop any code related to SCM_RIGHTS This is dead code after we dropped support for passing io_uring fds over SCM_RIGHTS, get rid of it.(CVE-2023-52656)

 In the Linux kernel, the following vulnerability has been resolved: ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses Since commit a4d5613c4dc6 (''arm: extend pfn_valid to take into account freed memory map alignment'') changes the semantics of pfn_valid() to check presence of the memory map for a PFN.(CVE-2024-26947)

 In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv-timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe -timer_setup -bttv_set_dma -mod_timer; bttv_remove -kfree(btv);
 -bttv_irq_timeout -USE btv(CVE-2023-52847)

 In the Linux kernel, the following vulnerability has been resolved: calipso: fix memory leak in netlbl_calipso_add_pass() If IPv6 support is disabled at boot (ipv6.disable=1), the calipso_init() - netlbl_calipso_ops_register() function isn't called, and the netlbl_calipso_ops_get() function always returns NULL. In this case, the netlbl_calipso_add_pass() function allocates memory for the doi_def variable but doesn't free it with the calipso_doi_free().(CVE-2023-52698)

 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path The commit mutex should not be released during the critical section between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC worker could collect expired objects and get the released commit lock within the same GC sequence. nf_tables_module_autoload() temporarily releases the mutex to load module dependencies, then it goes back to replay the transaction again. Move it at the end of the abort phase after nft_gc_seq_end() is called.(CVE-2024-26925)

 In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: do not free live element Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern.
 Quoting Pablo: add_elem(''00000000'') timeout 100 ms ... add_elem(''0000000X'') timeout 100 ms del_elem(''0000000X'') ---------------- delete one that was just added ... add_elem(''00005000'') timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The
 _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano)(CVE-2024-26924)

 In the Linux kernel, the following vulnerability has been resolved: ACPI: LPIT: Avoid u32 multiplication overflow In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough ( UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2023-52683)

 In the Linux kernel, the following vulnerability has been resolved: ACPI: video: check for error while searching for backlight device parent If acpi_get_parent() called in acpi_video_dev_register_backlight() fails, for example, because acpi_ut_acquire_mutex() fails inside acpi_get_parent), this can lead to incorrect (uninitialized) acpi_parent handle being passed to acpi_get_pci_dev() for detecting the parent pci device. Check acpi_get_parent() result and set parent device only in case of success. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2023-52693)

 In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix out-of-bound bugs caused by unset skb-mac_header If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb-mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: UG: KASAN:
 slab-out-of-bounds in ipvlan_xmit_mode_l2(CVE-2022-48651)

 In the Linux kernel, the following vulnerability has been resolved: i40e: Do not allow untrusted VF to remove administratively set MAC Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed.
 Do not allow untrusted VF to remove primary MAC when it was set administratively by PF.(CVE-2024-26830)

 In the Linux kernel, the following vulnerability has been resolved: selinux: avoid dereference of garbage after mount failure In case kern_mount() fails and returns an error pointer return in the error branch instead of continuing and dereferencing the error pointer. While on it drop the never read static variable selinuxfs_mount.(CVE-2024-35904)

 In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Reset queue_priority_hint on parking Originally, with strict in order execution, we could complete execution only when the queue was empty. Preempt-to-busy allows replacement of an active request that may complete before the preemption is processed by HW. If that happens, the request is retired from the queue, but the queue_priority_hint remains set, preventing direct submission until after the next CS interrupt is processed. This preempt-to- busy race can be triggered by the heartbeat, which will also act as the power-management barrier and upon completion allow us to idle the HW. We may process the completion of the heartbeat, and begin parking the engine before the CS event that restores the queue_priority_hint, causing us to fail the assertion that it is MIN.(CVE-2024-26937)

 In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault.(CVE-2022-48703)

Tenable has extracted the preceding description block directly from the EulerOS Virtualization kernel security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Solution

Update the affected kernel packages.

See Also

http://www.nessus.org/u?f5f9f234

Plugin Details

Severity: High

ID: 205964

File Name: EulerOS_SA-2024-2205.nasl

Version: 1.1

Type: local

Published: 8/21/2024

Updated: 8/21/2024

Supported Sensors: Nessus

Risk Information

VPR

Risk Factor: High

Score: 8.4

CVSS v2

Risk Factor: Medium

Base Score: 6.8

Temporal Score: 5.6

Vector: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C

CVSS Score Source: CVE-2024-36978

CVSS v3

Risk Factor: High

Base Score: 7.8

Temporal Score: 7.2

Vector: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Temporal Vector: CVSS:3.0/E:F/RL:O/RC:C

Vulnerability Information

CPE: cpe:/o:huawei:euleros:uvp:2.11.0, p-cpe:/a:huawei:euleros:kernel-tools-libs, p-cpe:/a:huawei:euleros:bpftool, p-cpe:/a:huawei:euleros:kernel-tools, p-cpe:/a:huawei:euleros:kernel, p-cpe:/a:huawei:euleros:python3-perf, p-cpe:/a:huawei:euleros:kernel-abi-stablelists

Required KB Items: Host/local_checks_enabled, Host/cpu, Host/EulerOS/release, Host/EulerOS/rpm-list, Host/EulerOS/uvp_version

Exploit Available: true

Exploit Ease: Exploits are available

Patch Publication Date: 8/20/2024

Vulnerability Publication Date: 10/31/2022

CISA Known Exploited Vulnerability Due Dates: 8/28/2024

Reference Information

CVE: CVE-2021-47037, CVE-2021-47070, CVE-2021-47076, CVE-2021-47094, CVE-2021-47101, CVE-2021-47105, CVE-2021-47182, CVE-2021-47212, CVE-2021-47265, CVE-2021-47427, CVE-2021-47469, CVE-2022-48651, CVE-2022-48666, CVE-2022-48689, CVE-2022-48692, CVE-2022-48703, CVE-2023-52467, CVE-2023-52476, CVE-2023-52478, CVE-2023-52484, CVE-2023-52486, CVE-2023-52492, CVE-2023-52498, CVE-2023-52515, CVE-2023-52522, CVE-2023-52527, CVE-2023-52572, CVE-2023-52578, CVE-2023-52583, CVE-2023-52587, CVE-2023-52597, CVE-2023-52598, CVE-2023-52612, CVE-2023-52615, CVE-2023-52616, CVE-2023-52619, CVE-2023-52620, CVE-2023-52621, CVE-2023-52622, CVE-2023-52623, CVE-2023-52652, CVE-2023-52656, CVE-2023-52672, CVE-2023-52676, CVE-2023-52677, CVE-2023-52683, CVE-2023-52693, CVE-2023-52698, CVE-2023-52732, CVE-2023-52752, CVE-2023-52753, CVE-2023-52757, CVE-2023-52759, CVE-2023-52762, CVE-2023-52764, CVE-2023-52796, CVE-2023-52808, CVE-2023-52814, CVE-2023-52818, CVE-2023-52831, CVE-2023-52832, CVE-2023-52835, CVE-2023-52843, CVE-2023-52847, CVE-2023-52859, CVE-2023-52864, CVE-2023-52868, CVE-2023-52869, CVE-2024-23307, CVE-2024-23851, CVE-2024-24855, CVE-2024-24860, CVE-2024-24861, CVE-2024-25739, CVE-2024-26614, CVE-2024-26627, CVE-2024-26633, CVE-2024-26635, CVE-2024-26640, CVE-2024-26641, CVE-2024-26642, CVE-2024-26643, CVE-2024-26645, CVE-2024-26654, CVE-2024-26656, CVE-2024-26659, CVE-2024-26661, CVE-2024-26663, CVE-2024-26665, CVE-2024-26668, CVE-2024-26669, CVE-2024-26671, CVE-2024-26673, CVE-2024-26675, CVE-2024-26679, CVE-2024-26680, CVE-2024-26686, CVE-2024-26688, CVE-2024-26689, CVE-2024-26695, CVE-2024-26698, CVE-2024-26704, CVE-2024-26720, CVE-2024-26733, CVE-2024-26734, CVE-2024-26735, CVE-2024-26739, CVE-2024-26740, CVE-2024-26743, CVE-2024-26744, CVE-2024-26747, CVE-2024-26752, CVE-2024-26759, CVE-2024-26763, CVE-2024-26764, CVE-2024-26769, CVE-2024-26772, CVE-2024-26773, CVE-2024-26787, CVE-2024-26804, CVE-2024-26805, CVE-2024-26808, CVE-2024-26809, CVE-2024-26810, CVE-2024-26812, CVE-2024-26813, CVE-2024-26830, CVE-2024-26833, CVE-2024-26835, CVE-2024-26840, CVE-2024-26845, CVE-2024-26851, CVE-2024-26855, CVE-2024-26857, CVE-2024-26859, CVE-2024-26862, CVE-2024-26870, CVE-2024-26872, CVE-2024-26875, CVE-2024-26882, CVE-2024-26883, CVE-2024-26884, CVE-2024-26885, CVE-2024-26889, CVE-2024-26894, CVE-2024-26900, CVE-2024-26901, CVE-2024-26915, CVE-2024-26920, CVE-2024-26923, CVE-2024-26924, CVE-2024-26925, CVE-2024-26931, CVE-2024-26934, CVE-2024-26935, CVE-2024-26937, CVE-2024-26947, CVE-2024-26953, CVE-2024-26958, CVE-2024-26960, CVE-2024-26961, CVE-2024-26973, CVE-2024-26974, CVE-2024-26976, CVE-2024-26982, CVE-2024-26984, CVE-2024-26988, CVE-2024-26993, CVE-2024-27004, CVE-2024-27008, CVE-2024-27010, CVE-2024-27011, CVE-2024-27012, CVE-2024-27013, CVE-2024-27014, CVE-2024-27017, CVE-2024-27019, CVE-2024-27020, CVE-2024-27038, CVE-2024-27043, CVE-2024-27044, CVE-2024-27046, CVE-2024-27059, CVE-2024-27065, CVE-2024-27073, CVE-2024-27075, CVE-2024-27389, CVE-2024-27395, CVE-2024-27397, CVE-2024-27403, CVE-2024-27415, CVE-2024-27431, CVE-2024-27437, CVE-2024-35790, CVE-2024-35791, CVE-2024-35807, CVE-2024-35808, CVE-2024-35809, CVE-2024-35823, CVE-2024-35835, CVE-2024-35847, CVE-2024-35852, CVE-2024-35854, CVE-2024-35855, CVE-2024-35870, CVE-2024-35877, CVE-2024-35879, CVE-2024-35886, CVE-2024-35888, CVE-2024-35895, CVE-2024-35896, CVE-2024-35897, CVE-2024-35900, CVE-2024-35904, CVE-2024-35905, CVE-2024-35910, CVE-2024-35924, CVE-2024-35925, CVE-2024-35939, CVE-2024-35950, CVE-2024-35958, CVE-2024-35960, CVE-2024-35967, CVE-2024-35973, CVE-2024-35984, CVE-2024-35989, CVE-2024-35995, CVE-2024-35997, CVE-2024-36000, CVE-2024-36004, CVE-2024-36006, CVE-2024-36007, CVE-2024-36008, CVE-2024-36015, CVE-2024-36016, CVE-2024-36020, CVE-2024-36021, CVE-2024-36031, CVE-2024-36883, CVE-2024-36886, CVE-2024-36898, CVE-2024-36899, CVE-2024-36900, CVE-2024-36901, CVE-2024-36902, CVE-2024-36903, CVE-2024-36904, CVE-2024-36905, CVE-2024-36908, CVE-2024-36914, CVE-2024-36916, CVE-2024-36917, CVE-2024-36919, CVE-2024-36924, CVE-2024-36927, CVE-2024-36933, CVE-2024-36938, CVE-2024-36939, CVE-2024-36940, CVE-2024-36949, CVE-2024-36950, CVE-2024-36953, CVE-2024-36954, CVE-2024-36959, CVE-2024-36968, CVE-2024-36971, CVE-2024-36978, CVE-2024-38564, CVE-2024-38601, CVE-2024-38662