Siemens SCALANCE W700 Exposure of Sensitive Information to an Unauthorized Actor (CVE-2024-5535)

critical Tenable OT Security Plugin ID 502880

Synopsis

The remote OT asset is affected by a vulnerability.

Description

Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a no overlap response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.

This plugin only works with Tenable.ot.
Please visit https://www.tenable.com/products/tenable-ot for more information.

Solution

Refer to the vendor advisory.

Plugin Details

Severity: Critical

ID: 502880

Version: 1.2

Type: remote

Family: Tenable.ot

Published: 2/24/2025

Updated: 2/25/2025

Supported Sensors: Tenable OT Security

Risk Information

VPR

Risk Factor: Medium

Score: 6.0

CVSS v3

Risk Factor: Critical

Base Score: 9.1

Temporal Score: 7.9

Vector: CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Temporal Vector: CVSS:3.0/E:U/RL:O/RC:C

Vulnerability Information

CPE: cpe:/o:siemens:scalance_wab762-1_firmware:3.0.0, cpe:/o:siemens:scalance_wum766-1_%28me%29_firmware:3.0.0, cpe:/o:siemens:scalance_wum766-1_%28usa%29_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_eec_%28me%29_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_%28me%29_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_eec_firmware:3.0.0, cpe:/o:siemens:simatic_s7-1500_cpu_firmware:3.1.0, cpe:/o:siemens:scalance_wum763-1_firmware:3.0.0, cpe:/o:siemens:scalance_wub762-1_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_firmware:3.0.0, cpe:/o:siemens:siplus_s7-1500_cpu_firmware:3.1.0, cpe:/o:siemens:scalance_wam763-1_%28me%29_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_eec_%28us%29_firmware:3.0.0, cpe:/o:siemens:scalance_wub762-1_ifeatures_firmware:3.0.0, cpe:/o:siemens:simatic_s7-1500_tm_mfp, cpe:/o:siemens:scalance_wam763-1_%28us%29_firmware:3.0.0, cpe:/o:siemens:scalance_wam763-1_firmware:3.0.0, cpe:/o:siemens:scalance_wum766-1_firmware:3.0.0, cpe:/o:siemens:scalance_wam766-1_%28us%29_firmware:3.0.0, cpe:/o:siemens:scalance_wum763-1_%28us%29_firmware:3.0.0

Required KB Items: Tenable.ot/Siemens

Exploit Ease: No known exploits are available

Patch Publication Date: 12/12/2023

Vulnerability Publication Date: 12/12/2023

Reference Information

CVE: CVE-2024-5535

CWE: 200

ICSA: 25-044-09

Detections

Analytics