Detections
Analytics

EulerOS 2.0 SP9 : qemu (EulerOS-SA-2022-1014)

high Nessus Plugin ID 157171

Synopsis

The remote EulerOS host is missing multiple security updates.

Description

According to the versions of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

 - The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL dereference) when the command header 'ad->cur_cmd' is null. (CVE-2019-12067)

 - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address in an msi-x mmio operation. (CVE-2020-13754)

 - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

 - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

 - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check before an ide_cancel_dma_sync call. (CVE-2020-25743)

 - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

 - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
 This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

 - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of header data even if that exceeds the total packet length. (CVE-2020-29129)

 - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer index is not validated. (CVE-2020-29443)

 - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
 This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

 - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
 The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

 - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as system availability. (CVE-2021-20181)

 - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
 (CVE-2021-20203)

 - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said issue while updating controller state fields and their subsequent processing. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

 - A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req' from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
 (CVE-2021-3392)

 - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-3416)

 - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a single, large transfer request, to reduce the overhead and improve performance. The combined size of the bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a denial of service. (CVE-2021-3527)

 - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user- gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

 - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost- user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit this issue to leak memory from the host. (CVE-2021-3545)

 - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process. (CVE-2021-3546)

 - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw exists in the bootp_input() function and could occur while processing a udp packet that is smaller than the size of the 'bootp_t' structure. A malicious guest could use this flaw to leak 10 bytes of uninitialized heap memory from the host. The highest threat from this vulnerability is to data confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3592)

 - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw exists in the udp6_input() function and could occur while processing a udp packet that is smaller than the size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3593)

 - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw exists in the tftp_input() function and could occur while processing a udp packet that is smaller than the size of the 'tftp_t' structure. This issue may lead to out-of-bounds read access or indirect host memory disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3595)

 - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata, resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the host. (CVE-2021-3682)

 - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of- bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host. (CVE-2021-3713)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Solution

Update the affected qemu packages.

See Also

http://www.nessus.org/u?4ea5cba8

Plugin Details

Severity: High

ID: 157171

File Name: EulerOS_SA-2022-1014.nasl

Version: 1.6

Type: local

Published: 1/28/2022

Updated: 11/17/2023

Supported Sensors: Nessus

Risk Information

VPR

Risk Factor: High

Score: 7.3

CVSS v2

Risk Factor: Medium

Base Score: 6.9

Temporal Score: 5.4

Vector: CVSS2#AV:L/AC:M/Au:N/C:C/I:C/A:C

CVSS Score Source: CVE-2021-3748

CVSS v3

Risk Factor: High

Base Score: 8.5

Temporal Score: 7.6

Vector: CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H

Temporal Vector: CVSS:3.0/E:P/RL:O/RC:C

CVSS Score Source: CVE-2021-3682

Vulnerability Information

CPE: p-cpe:/a:huawei:euleros:qemu-img, cpe:/o:huawei:euleros:2.0

Required KB Items: Host/local_checks_enabled, Host/cpu, Host/EulerOS/release, Host/EulerOS/rpm-list, Host/EulerOS/sp

Excluded KB Items: Host/EulerOS/uvp_version

Exploit Available: true

Exploit Ease: Exploits are available

Patch Publication Date: 1/28/2022

Vulnerability Publication Date: 6/2/2020

Reference Information

CVE: CVE-2019-12067, CVE-2020-13754, CVE-2020-25085, CVE-2020-25742, CVE-2020-25743, CVE-2020-27617, CVE-2020-27821, CVE-2020-29129, CVE-2020-29443, CVE-2020-35504, CVE-2020-35505, CVE-2021-20181, CVE-2021-20203, CVE-2021-20221, CVE-2021-3392, CVE-2021-3416, CVE-2021-3527, CVE-2021-3544, CVE-2021-3545, CVE-2021-3546, CVE-2021-3592, CVE-2021-3593, CVE-2021-3595, CVE-2021-3682, CVE-2021-3713, CVE-2021-3748

IAVB: 2020-B-0041-S, 2020-B-0063-S, 2020-B-0075-S